+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: S16Turbo,SOLD!!!!! (/showthread.php?tid=8185)
RE: S16Turbo, 4pots are for pussies - Pugmarshall - 26-03-2013
Whilst you were pushing it?!
RE: S16Turbo, 4pots are for pussies - ozonehostile - 26-03-2013
When did you flare the rear arches? Looks very nice
RE: S16Turbo, 4pots are for pussies - sam - 26-03-2013
Just noticed that you bonnet has half a badge? Loooooooooks soooo nice dude
RE: S16Turbo, 4pots are for pussies - darrenjlobb - 26-03-2013
Lol let me guess you tried moving it around with no driveshafts in?
Just get set of old shafts and rip end joints off to use to bolt bearings together to stop that happening when motor is out
RE: S16Turbo, 4pots are for pussies - 306GT30 - 26-03-2013
(26-03-2013, 04:30 PM)Pugmarshall Wrote: Whilst you were pushing it?!YEP!
(26-03-2013, 04:31 PM)ozonehostile Wrote: When did you flare the rear arches? Looks very niceCar had a full respray in 2009 i believe, thats when they cleaned everything and did the arches
(26-03-2013, 04:35 PM)sam Wrote: Just noticed that you bonnet has half a badge? Loooooooooks soooo nice dudeits a full badge, rest of the badge is inside of the bonnet, theres a recess where i stuck it in, i like it a lot this way
(26-03-2013, 04:52 PM)darrenjlobb Wrote: Lol let me guess you tried moving it around with no driveshafts in?
Just get set of old shafts and rip end joints off to use to bolt bearings together to stop that happening when motor is out
Yep mate, complete f*cking wheel fell off with brakedisc and everything lol... looks ill be needing a new wheelbearing after this one i think...(?)
BTW barnbuilds suck! i just washed my car, and its been in the barn for 5 hours now and its a beast already ... lol waste of effort
Next month when the car is going to get the exhaust done in the garage, we are lowering the rearbeam aswell.... finally cause i cant stand this insane rake...looks awfull
Boostpipes are @ the welder... will be done this week.
RE: S16Turbo, 4pots are for pussies - darrenjlobb - 26-03-2013
The shaft is what holds bearing together lol, hence why its important to do shaft nut up to correct tightness
gotta love learning the hard way, I learn many years ago being lazy with field cars not bothering to put nuts on, soon found out dosnt work like that!
RE: S16Turbo, 4pots are for pussies - 306GT30 - 26-03-2013
Hahaahahah, i hear bang... and then my wheel was uhmm like fcked... lol
I assume this wrecks the wheelbearing during steering? cause the backend of the bearing was completely of..
We hamered it in again now and put the wheel on again, and pushed the car the last 3mtrs to its place..... need to get a new wheelbearing i guess?
RE: S16Turbo, 4pots are for pussies - sam - 26-03-2013
so over all how much has the engine build cost you or don't you want to add it all up yet?
RE: S16Turbo, 4pots are for pussies - ozonehostile - 26-03-2013
Yeah new bearings in both wheels to be safe mate, the driveshaft clamps the wheelbearing together in the hub so moving it without them connected will have put a lot of stress on the bearing, and the result you've seen first hand
RE: S16Turbo, 4pots are for pussies - 306GT30 - 26-03-2013
(26-03-2013, 08:56 PM)sam Wrote: so over all how much has the engine build cost you or don't you want to add it all up yet?
I didnt pay that much for the DP engineering stuff since they came from a friends car, the inlet on my car is the only one on a S16/RFS in the world DP made.
Normalewise you pay :
inlet : 1300 euro
ex manifold : 1280 euro
DP : 350 euro
Other stuff:
Turbo 1200
Intercooler 200
IC piping 200
AN fittings + braided hose - 250 orso
Tial MVS - 300
Tial Q - 260
and the list goes on and on and on
wheels and R888 $$$$$$$$$$$
seats , flocking, cage
Uhmm lets stop oke
(26-03-2013, 08:58 PM)ozonehostile Wrote: Yeah new bearings in both wheels to be safe mate, the driveshaft clamps the wheelbearing together in the hub so moving it without them connected will have put a lot of stress on the bearing, and the result you've seen first hand
oke thankyou, will sort that out, what do the wheelbearings cost for a 306?
cheers
RE: S16Turbo, 4pots are for pussies - Tom - 26-03-2013
Seen the big callipers on a Porsche today, f*ck ME, they are fecking huge!
RE: S16Turbo, 4pots are for pussies - ozonehostile - 26-03-2013
Last time I replaced wheelbearings they were about 30 pounds each. Use genuine Peugeot
RE: S16Turbo, 4pots are for pussies - 306GT30 - 26-03-2013
(26-03-2013, 09:19 PM)Tom Wrote: Seen the big callipers on a Porsche today, f*ck ME, they are fecking huge!
Theyre 33cm!! in length... thats insane BIG!
(26-03-2013, 09:42 PM)ozonehostile Wrote: Last time I replaced wheelbearings they were about 30 pounds each. Use genuine Peugeot
thankyou sir
RE: S16Turbo, 4pots are for pussies - 306GT30 - 31-03-2013
To be continued sooooooooooooon
![[Image: DSC_6901_zpsbc474425.jpg]](http://i1280.photobucket.com/albums/a488/PaulMpower2/DSC_6901_zpsbc474425.jpg)
S16Turbo, 4pots are for pussies - Jukie88 - 31-03-2013
(23-03-2013, 06:05 PM)richard Wrote: i can make them 4 you.. yes also in different bores.. fe 4x108.. also can make the 205 gti speedlines in 17 inch 3 piece
ask paul, i'm a little wheel whore
How much !!!! I May just have had a little sex wee !!!!
RE: S16Turbo, 4pots are for pussies - 306GT30 - 31-03-2013
Send richard a pm mate!! hes the wheelking, can make you anything!
S16Turbo, 4pots are for pussies - Jukie88 - 31-03-2013
His pm's are disabled :-( sad times as I'd love to know what he'd quite for a set :-(
S16Turbo, 4pots are for pussies - ash240970 - 01-04-2013
Dude - what happened to the spoiler??
RE: S16Turbo, 4pots are for pussies - 306GT30 - 03-04-2013
Still got it mate, just been busy as f*ck, ill arrange it dont worry
Lost motivation on working on the car... kinda bored with it, still so much to do and everytime theres something... they welded up my IC piping completely wrong, wheel fell off, needs new wheelbearings etc, engines out and #$&%#%^%U$RE%@E^%#!@^@!^@^&&#&#$&REYHFDH
Maybe better feeling next week, if not im putting a blanket over it and well see what to do with it
RE: S16Turbo, 4pots are for pussies - lolsteve - 03-04-2013
Can't have two epic cars stop at the same time, would leave us with nothing to perv over after a hard day
RE: S16Turbo, 4pots are for pussies - vlj - 03-04-2013
If you finish up with this I will drive over to Europeland and murder you.
RE: S16Turbo, 4pots are for pussies - Poodle - 03-04-2013
Woah, you need to lay off the 'roids man!
RE: S16Turbo, 4pots are for pussies - 306GT30 - 04-04-2013
Got what?
RE: S16Turbo, 4pots are for pussies - 306Brad - 04-04-2013
I'm a fan of mega clean bays, top work sir!
RE: S16Turbo, 4pots are for pussies - 306GT30 - 07-04-2013
Well, not much news..cars collecting a lot of dust and i mean a lot!
Tomorrow were putting the engine back in, and start with putting things together for the final time (hopefully) ive bought 98% of what i need to finish the project.
Still waiting on the adapters for the brakes, some intercoolerpiping has to be rewelded since they fcked up.
Bought new wheelbearings for the front.. so i can get that fixed when the engines in, i now know that pushing the car in and out of the barn with no driveshafts...uhmm kills your bearings and your wheels fall of , lol
Hopefully we can do some good work on the car tomorrow, and connect everything again and then its time to finish of the interior, move the car to VVT Motorsport to get the exhaust on, bleed the brakes, etc.. then cars needs to get back home and fit the cage.
Still a lot of work to be done, and hopefully well make the deadline for mapping in May.
In the meanwhile i got tired of the yellow caliper laying in the kitchen (other one is with the adaptermakingdude) and ive painted it .....uhmmm FLUOR PINK, white base coat and a few layers of Fluor Pink... the pics dont even do them justice, ive tried 3 cameras and they all cant capture the real color of it... you can see these from MIIIIIIIIIIIIIIIIIIIIIIILEEEEEEEEEEEEEEEES!!! away, theyre insanely bright, thought of doing the rollcage also this color, lol
the pics dont even come close to the real flashy color
![[Image: DSC_6927_zpsd0411853.jpg]](http://i1280.photobucket.com/albums/a488/PaulMpower2/DSC_6927_zpsd0411853.jpg)
![[Image: DSC_6926_zps71bc258c.jpg]](http://i1280.photobucket.com/albums/a488/PaulMpower2/DSC_6926_zps71bc258c.jpg)
Also change of plans, were going screamerpipe!!!!!!
More fresh pics tomorrow
RE: S16Turbo, 4pots are for pussies - Ed Doe - 07-04-2013
That's so win
Correct me if I'm wrong but did I not read you had to ditch the screamer pipe originally due to space constraints?
RE: S16Turbo, 4pots are for pussies - 306GT30 - 07-04-2013
To bad the cameras cant catch the fluorescent color, cause it really looks fantastic irl... they almost give light so bright!
Space was tight, but we found 2 small spots where we can/could route it trough, tomorrow well mock it up and have it welded next week... i wont be driving this as a daily but just for fun, it might be loud as f*ck as well
![[Image: DSC_6961_zps37d52a52.jpg]](http://i1280.photobucket.com/albums/a488/PaulMpower2/DSC_6961_zps37d52a52.jpg)
![[Image: DSC_6953_zps2931396e.jpg]](http://i1280.photobucket.com/albums/a488/PaulMpower2/DSC_6953_zps2931396e.jpg)
![[Image: DSC_6944_zps62f85258.jpg]](http://i1280.photobucket.com/albums/a488/PaulMpower2/DSC_6944_zps62f85258.jpg)
![[Image: DSC_6962_zpsf9a06c96.jpg]](http://i1280.photobucket.com/albums/a488/PaulMpower2/DSC_6962_zpsf9a06c96.jpg)
Shit i cant get them good on the camera... done with trying
![[Image: DSC_6955_zps9c7868d9.jpg]](http://i1280.photobucket.com/albums/a488/PaulMpower2/DSC_6955_zps9c7868d9.jpg)
with 2 boostpipes almost finished
![[Image: DSC_6965_zpsb77e9de2.jpg]](http://i1280.photobucket.com/albums/a488/PaulMpower2/DSC_6965_zpsb77e9de2.jpg)
And also bought a FPR with some nice AN fittings, wich will go nicely with the rest
![[Image: DSC_6952_zpsdb3e79e8.jpg]](http://i1280.photobucket.com/albums/a488/PaulMpower2/DSC_6952_zpsdb3e79e8.jpg)
![[Image: DSC_6958_zps629e9a44.jpg]](http://i1280.photobucket.com/albums/a488/PaulMpower2/DSC_6958_zps629e9a44.jpg)
RE: S16Turbo, 4pots are for pussies - Just Sean - 07-04-2013
i promise you this... you will not regret the screamer pipe!
RE: S16Turbo, 4pots are for pussies - 306GT30 - 07-04-2013
I know what screamerpipes do.... --->> theyre COPMAGNETS!!! lol
RE: S16Turbo, 4pots are for pussies - cwspellowe - 07-04-2013
Only when the wastegate's open fella. Take it easy with your right foot and all shall be bon.
I want a screamer pipe for the estate. Right out the bonnet, with a flapper on it, so when the wg opens it'll go "WAAAAAAAHHHHHHHHHHHHHHH" like a choo choo train.