S16Turbo,SOLD!!!!! - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20) +--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3) +--- Thread: S16Turbo,SOLD!!!!! (/showthread.php?tid=8185) |
RE: 306 S16 GT3071R Turbooooooooooo - C.A.R. - 16-01-2013 Really love this. Wish the Leon Cupra splitters hadn't gone up in price recently, they used to be really cheap... RE: 306 S16 GT3071R Turbooooooooooo - 306GT30 - 16-01-2013 thx guys, what do you guys have to pay for the splitters? i paid 31 euros for it RE: 306 S16 GT3071R Turbooooooooooo - C.A.R. - 16-01-2013 (16-01-2013, 04:29 PM)306GT30 Wrote: thx guys, what do you guys have to pay for the splitters? £50! ~ €60 They used to be about £20! I'm not spending that much on one, not worth it for something which could get ripped off by an aggressive speedbump... RE: 306 S16 GT3071R Turbooooooooooo - Just Sean - 16-01-2013 I never knew they'd gone up! That's a shame always loved um! RE: 306 S16 GT3071R Turbooooooooooo - 306GT30 - 16-01-2013 Well it took some time .... but the CF bonnet is in, it got slightly damaged during transport on the edges. I need to contact TNT and get some of my money back, then i will get it buffed completely and a few coats of clear on it and hopefully itll be good enough to fit the car. Also today the Aerocatches came in, hopefully my new dremel tomorrow so i can fit make the holes for the aerocatches. Here are some quick shots 306 S16 GT3071R Turbooooooooooo - Jonny b - 16-01-2013 Looking sweet there fella! RE: 306 S16 GT3071R Turbooooooooooo - sam - 16-01-2013 Looks good dude, looks alright with out the grill RE: 306 S16 GT3071R Turbooooooooooo - C.A.R. - 17-01-2013 WTF, de ja vous, you can't post the same update twice! I'm disappointed now RE: 306 S16 GT3071R Turbooooooooooo - chrisrallye - 17-01-2013 looking good mate, be good to see what it goes like when its all done. RE: 306 S16 GT3071R Turbooooooooooo - 306GT30 - 17-01-2013 (17-01-2013, 09:24 AM)C.A.R. Wrote: WTF, de ja vous, you can't post the same update twice! I'm disappointed now Huh how did that happen? Well maybe a small update then, yesterdayevening a friend of mine came and took the bonnet with him along with some other carbonbits i had laying around (dashplate) Since the bonnet was a bit damaged he is going to do his magic on the bonnet and its getting a few fresh coats of clear, so it will look shinyshinyshiny. Wont be back here until next week, also the carbonfiber doorcards will be shipped out to me from the uk tomorrow. And hopefully the custommade dials will also be send out tomorrow From both if things will go right ill have pics tomorrow from the manufacturers. Ordered some rollcage padding already. Pics soon RE: 306 S16 GT3071R Turbooooooooooo - C.A.R. - 17-01-2013 Happy days. Who is doing your dials? Sorry if I missed it in your thread. I've always wanted Metal Monkey dials but can't afford them! RE: 306 S16 GT3071R Turbooooooooooo - 306GT30 - 17-01-2013 Xtuning in Germany/Bulgaria custom plasma dials , will look very very nice! A bit more then metal monkey ones, though RE: 306 S16 GT3071R Turbooooooooooo - lewisdmz - 17-01-2013 Black on black is sweeet BUT you'll have to keep the tyres clean and black constantly otherwise it will look like poverty. I'm curious, and of course you don't have to answer, but what do you do for a living? RE: 306 S16 GT3071R Turbooooooooooo - 306GT30 - 17-01-2013 im a bankrobber Well the custommade dials have been made Here are two pics the manufacturer made for me, (NOTE, it loos kinda Aqua blue , but they are really BLUE BLUE!, ) Will look great with the Prosport blue gauges!, will order also the heaterpanel from him to match with the rest MP Motorsport stands for Marvin & Paul ( my mate and me!:thumbsup ) RE: 306 S16 GT3071R Turbooooooooooo - 306GT30 - 20-01-2013 strange... 306 S16 GT3071R Turbooooooooooo - Aaron _d95 - 20-01-2013 (17-01-2013, 09:46 PM)306GT30 Wrote: im a bankrobber Are yours in km or have they been made in mph RE: 306 S16 GT3071R Turbooooooooooo - Poodle - 20-01-2013 Um, says km/h on the dials lol. They look really nice, clean design. 306 S16 GT3071R Turbooooooooooo - Aaron _d95 - 20-01-2013 (20-01-2013, 10:00 PM)Poodle Wrote: Um, says km/h on the dials lol. Ye but he said that's a pic the manufacturer made for him that's why I was checking if the ones he was getting were kmh or mph RE: 306 S16 GT3071R Turbooooooooooo - cwspellowe - 20-01-2013 OAFT! Where do i get such sexual dials?! RE: 306 S16 GT3071R Turbooooooooooo - Just Sean - 20-01-2013 he'll need kph anyway RE: 306 S16 GT3071R Turbooooooooooo - 306GT30 - 20-01-2013 www.Xtuners.com and yes those are my dials! he made pics before he sends them to me, they are fully custom made. Have a look at his site, very very very nice stuff!! 306 S16 GT3071R Turbooooooooooo - Aaron _d95 - 20-01-2013 (20-01-2013, 10:03 PM)Just Sean Wrote: he'll need kph anyway Didn't notice it was LHD. I just seen a pic of the plasma dials someone put up and there's was a RHD. RE: 306 S16 GT3071R Turbooooooooooo - the milkman - 22-01-2013 Don't know how I've missed this thread tbh!! I would just like to say you are the new god, f*ck that other guy claiming that no ones seen you are him!! Also I'm willing to remove both my balls with a rusty spoon and eat them if you let me drive this just 100yards down the road RE: 306 S16 GT3071R Turbooooooooooo - 306GT30 - 22-01-2013 Hahaha LMAO Milkman, If you ever are in Holland give me a shout and ill let you have a go in it mate Its going to be mental thats for sure. No updates yet, its to cold in the barn and cant be really bothered to work on it really now since im having some back problems and the cold isnt helping out much. Hopefully my mates comes saturday again and we can do some more things, this week should see the carbon doorcards arriving from LWS design (great people to deal with, great communication and good price!) Cage will be here on the 3rd of februar. My paintshopguy fell with this shitty weather and hurt his knie so he isnt spraying (at least not @ work) so the CF hood is also delayed. So hopefully this week some new pics! from some shiny bits RE: 306 S16 GT3071R Turbooooooooooo - ozonehostile - 22-01-2013 i cant imagene what shinies you have left to buy you already have so much haha. i really need to get my fibreglass bonnet sprayed, looks awful currently, on the subject of lightweight bonnets, how rigid is your carbon one? does it have any flex? RE: 306 S16 GT3071R Turbooooooooooo - the milkman - 22-01-2013 Bit of a cheeky question but how much was your boost oil volts gauge and where from RE: 306 S16 GT3071R Turbooooooooooo - Tom - 23-01-2013 (22-01-2013, 09:49 AM)the milkman Wrote: Bit of a cheeky question but how much was your boost oil volts gauge and where from http://www.ebay.co.uk/sch/i.html?_sacat=0&_nkw=prosport+gauge&_frs=1 I had a look at them myself :p RE: 306 S16 GT3071R Turbooooooooooo - the milkman - 23-01-2013 Ahh nice, wire in as normal or different way for digi ones? RE: 306 S16 GT3071R Turbooooooooooo - Just Sean - 23-01-2013 as normal mate RE: 306 S16 GT3071R Turbooooooooooo - 306GT30 - 23-01-2013 (22-01-2013, 09:46 AM)ozonehostile Wrote: i cant imagene what shinies you have left to buy you already have so much haha. cf bonnet is incredibly light , and easily pressed when you lean on it.. I think the standard bonnet weighs around 18-20 kilo mine is around 4 i think, very light! |