Breaking: Black GTi-6 - Printable Version

Breaking: Black GTi-6 - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25)
+--- Thread: Breaking: Black GTi-6 (/showthread.php?tid=6876)

Pages: 1 2

Breaking: Black GTi-6 - Scott - 09-10-2012

Hey guys, as some of you will have seen, I bought Vaughan's GTi-6 and am now breaking it. I think I've covered most of it. If there are any bits I've left out, please ask and I'll let you know if I still have it. Photos are available on request.

All prices are collected

Bits that have been sold
Headlights
Brakes all around
Gearbox & driveshafts
Suspension struts & springs
Steering wheel & boss
Clocks
Engine
Strut brace
Exhaust
Side/Rubstrips
Bonnet
Sparco Sprint bucket seats
Sparco side mount
Cobra subframe x1 (unused)
TRS harness

Sold pending payment
Cyclones with Proxes T1-R, fronts have good tread, rears do too but there is some wear on the shoulder of each of the wheels - £100
Phase 3 boot - £35
Grille & hockey sticks - £20

This leaves us with the following:
Exterior
Front bumper - £50
Rear bumper, a couple of scuffs in the paint but no cracks or major damage - £20
Rear lights - £10 each

Engine related
Bare Inlet Manifold - £35
Fuel rail x 2 - £10 each
GTi-6 exhaust manifold - £20
Cone filter - £5
Nearly new battery from a DTurbo - £35

Suspension
Hubs - Unsure if 16mm or 18mm, will confirm - £15 a side

Then the standard interior bits
Fascia - £10
Rallye door cards - £40

RE: Breaking: Black GTi-6 - Curt - 09-10-2012

Very interested in the cobra frame mate, if it's the base mount one? Which side is it, and can you grab a picture pleease?

RE: Breaking: Black GTi-6 - Scott - 09-10-2012

Sure thing, I'll whatsapp you a photo tomorrow mate Smile

I'm going to go with it being a passenger side one though since the OMP one is already on the drivers side Undecided

Re: Breaking: Black GTi-6 - Tyronnster - 09-10-2012

rear wiper motor

RE: Breaking: Black GTi-6 - Scott - 09-10-2012

Ah, it's de-wipered so I believe the motor isn't in there either since the car is stripped. I'll check for you tomorrow Smile

Re: Breaking: Black GTi-6 - Tyronnster - 09-10-2012

appreciated

RE: Breaking: Black GTi-6 - Fozzy - 09-10-2012

Motor long gone, i had to cut that to remove

RE: Breaking: Black GTi-6 - Curt - 09-10-2012

(09-10-2012, 09:54 PM)Scott Wrote: Sure thing, I'll whatsapp you a photo tomorrow mate I'm going to go with it being a passenger side one though since the OMP one is already on the drivers side

Sweet, cheers bud Smile

. Was going to order some today so I'm glad I held fire... That's cool, gonna need a pair anyway just need to know for when I order the other one Smile

RE: Breaking: Black GTi-6 - Matt - 09-10-2012

I'll take a fuel rail, add to my collection Wink

RE: Breaking: Black GTi-6 - Scott - 09-10-2012

Lol okay dude Smile

That's cool Curt, you'll likely just want that on its own then?

Edit: Sorry Curt, forgot to mention that if someone is interested in buying the whole interior then that will make life easier for me. On the flip side it might work out better for a potential buyer to get a matching OMP base for the passenger side and save on buying the Cobra one?

Edit 2: Cheers Fozzy, hadn't actually seen your post first time around!

RE: Breaking: Black GTi-6 - Curt - 09-10-2012

Yeah I would have thought so mate, I definitely want matching ones and have decided on the Cobra ones . If someone is interested in the lot then obviously I understand though Smile

Re: Breaking: Black GTi-6 - rocker8742 - 09-10-2012

Still got dibbs on that bootlid ? Wink

im guessing its easy enough to fit a new rear motor?

May also be interested in the clones

RE: Breaking: Black GTi-6 - Scott - 09-10-2012

For sure mate. I'm not sure if I mentioned but it's not including the spoiler? I'm not too keen on posting things like panels to be honest. Don't suppose you're up London way at all? If not then might be able to work out for one of the Bournemouth lads to courier it back down their way (unless I go down there in the near future) so it's a shorter journey for you to pick up, unless you're happy to arrange a courier?

I'll take some photos and send them over to you tomorrow/Thursday if that's okay, wouldn't want you to be unhappy with it once you get it.

That's cool Curt Smile

As I said, if a buyer wants to save a bit of money and get a matching OMP base then I'll keep you down for the Cobra one Smile

Re: Breaking: Black GTi-6 - rocker8742 - 09-10-2012

That's not a problem mate as the spoiler on mine can go on there, as for posting it that's understandable if you could get it down to bournemouth/portsmouth that'd be ideal and save me some trouble
pictures would be great got any of the clones too?

RE: Breaking: Black GTi-6 - Scott - 09-10-2012

I'll add photos of the clones to the list Smile

I'm regularly down in Portsmouth way anyway (well, Chichester/Bognor to be precise) but I'd be happy to meet you there with the boot in a couple of weekends time if you decide you do want it.

RE: Breaking: Black GTi-6 - 4WayDiablo - 09-10-2012

(09-10-2012, 10:48 PM)rocker8742 Wrote: That's not a problem mate as the spoiler on mine can go on there, as for posting it that's understandable if you could get it down to bournemouth/portsmouth that'd be ideal and save me some trouble
pictures would be great got any of the clones too?

I'm based in waterlooville (2mins north of Portsmouth) and will hopefully be heading up to Scotts on the 15th. If that's of any help?

Re: RE: Breaking: Black GTi-6 - rocker8742 - 09-10-2012

(09-10-2012, 11:03 PM)4WayDiablo Wrote:
(09-10-2012, 10:48 PM)rocker8742 Wrote: That's not a problem mate as the spoiler on mine can go on there, as for posting it that's understandable if you could get it down to bournemouth/portsmouth that'd be ideal and save me some trouble
pictures would be great got any of the clones too?

I'm based in waterlooville (2mins north of Portsmouth) and will hopefully be heading up to Scotts on the 15th. If that's of any help?

Could be very helpful mate Big Grin

RE: Breaking: Black GTi-6 - Matt - 09-10-2012

if im there at the weekeend i could also pick up

RE: Breaking: Black GTi-6 - puglove - 10-10-2012

Can i have second refusal on the steering wheel if its adished type and some one already has 1st. Ta Big Grin

RE: Breaking: Black GTi-6 - Scott - 10-10-2012

Sure thing Jamie. It's dished Smile

I'm considering it myself so I have first refusal currently Tongue

will let you know either way

RE: Breaking: Black GTi-6 - bigcheez2k3 - 10-10-2012

I thought the beam was rebuilt? That's what it said in his thread at least. He was offering a broken one too.

RE: Breaking: Black GTi-6 - Just Sean - 10-10-2012

are the fog light hids available?

RE: Breaking: Black GTi-6 - Scott - 10-10-2012

The rebuilt beam is no longer available unfortunately.

The fog light hids are available yes, they'll be extra on top of the fogs though. No idea what they're worth to be honest.

RE: Breaking: Black GTi-6 - Just Sean - 10-10-2012

You wont just sell me the hids then Sad

RE: Breaking: Black GTi-6 - bigcheez2k3 - 10-10-2012

(10-10-2012, 11:14 AM)Scott Wrote: The rebuilt beam is no longer available unfortunately.

The fog light hids are available yes, they'll be extra on top of the fogs though. No idea what they're worth to be honest.

Too late again Sad

What phase is it? I need the cover that goes over the courtesy light/IR reciever.

Also, a micro-switch from the door shut.

Thanks.

RE: Breaking: Black GTi-6 - Scott - 10-10-2012

I think everyone was too late on that one mate, it got nicked!

It's a phase 2 Smile

I still need to check the beam mate, it did feel okay driving it to be honest. I'll take a proper look tonight, but if it's all okay and you have it I'll chuck in the interior lighting cover and the door switch.

Don't suppose you're at Ace on Monday? You can have them for a cup of tea if you don't want the beam Smile

RE: Breaking: Black GTi-6 - bigcheez2k3 - 10-10-2012

(10-10-2012, 12:19 PM)Scott Wrote: I think everyone was too late on that one mate, it got nicked!

It's a phase 2 I still need to check the beam mate, it did feel okay driving it to be honest. I'll take a proper look tonight, but if it's all okay and you have it I'll chuck in the interior lighting cover and the door switch.

Don't suppose you're at Ace on Monday? You can have them for a cup of tea if you don't want the beam

Ok, I hope it's all good, nightmare getting a beam so far lol

If it is all ok, how much are you thinking for it?

I won't be at Ace, I work Monday nights which is shit as I always want to go.

This is the cover I'm looking for, hopefully it's the same one:

http://i.imgur.com/uHo6f.jpg (Pic is a little large so I'll leave it as a link)

RE: Breaking: Black GTi-6 - puglove - 10-10-2012

Ok cheers scott Big Grin

RE: Breaking: Black GTi-6 - Scott - 10-10-2012

No worries on Ace Smile

I'll sort it out with you PM, but I've not had a chance to get under the car today unfortunately. I took a few photos of the interior to the person who requested photos will receive some at some point this evening in a PM.

Sean I'll PM you about the HIDs Smile

RE: Breaking: Black GTi-6 - Niall - 10-10-2012

still got my name on that upper strut brace scott?