406 coupe lighting drawing - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22) +--- Forum: Electrics (https://www.306oc.co.uk/forum/forumdisplay.php?fid=23) +--- Thread: 406 coupe lighting drawing (/showthread.php?tid=680) |
406 coupe lighting drawing - cully - 31-12-2011 one for scott Re: 406 coupe lighting drawing - Scott - 31-12-2011 See if you can see the numbers [attachment=0] Re: 406 coupe lighting drawing - cully - 31-12-2011 cant even see the picture lmao Re: 406 coupe lighting drawing - Scott - 31-12-2011 I realised I uploaded the wrong attachment from my phone It's there now Re: 406 coupe lighting drawing - cully - 31-12-2011 focus the camera better ad i will read the numbers check this photo the numbers are on the black edges by the fuses Re: 406 coupe lighting drawing - Scott - 31-12-2011 Hmmm well I honestly couldn't see them yesterday when I was looking but if they are there, I guess I'll have to just FMyC Re: 406 coupe lighting drawing - mark_airey - 31-12-2011 There isn't a numbered diagram of the fuse locations on the back of the cover is there Scott? Just an idea! Re: 406 coupe lighting drawing - cully - 31-12-2011 this one look right ? your picture may be upside down also the fuse numbers 29-40 are on a seperate fuse board numbered BH12 Re: 406 coupe lighting drawing - Scott - 31-12-2011 Thanks Cully, the second board in that pdf looks like mine. And no, my camera was definitely the right way up Re: 406 coupe lighting drawing - stevieg - 31-12-2011 where can i get the 'offline' version of servicebox diagrams? Re: 406 coupe lighting drawing - cully - 31-12-2011 stevieg Wrote:where can i get the 'offline' version of servicebox diagrams? paid £4.50 from ebay for the Peugeot Workshop Manuals, Parts Catalogues and Wiring Diagrams (SEDRE) Re: 406 coupe lighting drawing - Scott - 31-12-2011 Unfortunately fuse 29 was not blown, and the light still didn't work when replaced with a known working 10a fuse, and there was no fuse 31... Kinda annoying... Re: 406 coupe lighting drawing - cully - 31-12-2011 f29 is main beam f31 is dipped beam has the light ever worked on your car? Re: 406 coupe lighting drawing - Scott - 31-12-2011 It worked fine up until yesterday afternoon... Just seen on a 406 site that the fuse could be 20, so going to check that tomorrow at some point (i.e. when I manage to wake up) Re: 406 coupe lighting drawing - stevieg - 01-01-2012 cully Wrote:stevieg Wrote:where can i get the 'offline' version of servicebox diagrams? cheers for that Re: 406 coupe lighting drawing - cully - 09-01-2012 new drawing Re: 406 coupe lighting drawing - Scott - 09-01-2012 Thanks for posting that mate Really appreciate it. So, after testing the connection with some wire I had lying around: The fuse board is getting a full 12v from the battery Pin 1 on the passenger headlight connector had 0.5ohms resistance, and full continuity. Any other ideas on what's stopping my headlight from working? And yes, we've tested it with different bulbs! Re: 406 coupe lighting drawing - cully - 10-01-2012 you said pin 1 wern't getting 12v when the low beam was on ? but it has continuity?? |