heater matrix flush - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22) +--- Forum: Interior, Exterior, ICE (https://www.306oc.co.uk/forum/forumdisplay.php?fid=12) +--- Thread: heater matrix flush (/showthread.php?tid=34638)

heater matrix flush - Ben_w - 02-08-2016 Guys, if you've seen my resto thread, you'll know things dont look great from a matrix point of view.... going to try flushing it first. Planning on doing so with a gentle flow of water backwards through the matrix. Question is, which of the matrix pipe attachments do I need to feed the water into. The one nearest the drivers side or passenger side? RE: heater matrix flush - Mattcheese31 - 02-08-2016 I'm guessing it doesn't matter dude, although if you want to back flush I think you need to go up the right one RE: heater matrix flush - Ben_w - 02-08-2016 Cheers Matt, confirms what I was thinking RE: heater matrix flush - DeeTurbo - 02-08-2016 Ben, if you reattach the pipes, then you can connect a hose pipe straight in to the pipe, flush at a higher pressure and flow rate thus getting more shit out. Also with this method you can see if the matrix is leaking still.