Zx track time @ fcs - help? - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: General (https://www.306oc.co.uk/forum/forumdisplay.php?fid=6) +--- Forum: The Couch (https://www.306oc.co.uk/forum/forumdisplay.php?fid=7) +--- Thread: Zx track time @ fcs - help? (/showthread.php?tid=34216) |
Zx track time @ fcs - help? - zx_volcane - 31-05-2016 So looks like I'll be taking the Zx on track at fcs More of a shakedown / bit of testing than anything else. Need to make a list of stuff that needs sorting before then. Can anyone help with time or the following things? Open to suggestion / unsolicited advice too. Will update as soon I think of anything. Find a set of tyres to run - 15" size Replace front wheel bearings - ordered Relocate fmic for better airflow Service brakes / change fluid Setup fuel pump Find spare bumper to make holes in for airflow Replace rear beam mounts RE: Zx track time @ fcs - help? - Eeyore - 31-05-2016 what do you mean find a set of tyres to run 15s? is that tyres for15" alloys or alloys for 15" tyres. Ive got a spare set of ps3s but youd have to pay me cost for them but if it helps time wise you can get them from ipswich. RE: Zx track time @ fcs - help? - zx_volcane - 31-05-2016 (31-05-2016, 04:20 PM)Eeyore Wrote: what do you mean find a set of tyres to run 15s? is that tyres for15" alloys or alloys for 15" tyres. Ive got a spare set of ps3s but youd have to pay me cost for them but if it helps time wise you can get them from ipswich. Need to either sort a set of tyres to run on track - in 15inch, with or without wheels. or a spare set of wheels and tyres to get me home - I can probably borrow some for this purpose RE: Zx track time @ fcs - help? - Ruan - 31-05-2016 DANGER TO MANIFOLD! RE: Zx track time @ fcs - help? - Dum-Dum - 31-05-2016 I'd offer to help as I've not long cracked open a 5l bottle of DOT4 and have a bleeder but I'm now tied up with work and stuff till FCS RE: Zx track time @ fcs - help? - Paul Baldwin - 31-05-2016 (31-05-2016, 05:04 PM)Ruan Wrote: DANGER TO MANIFOLD! That literally made me lol! As said I'm up for helping get a bit more air thru the FMIC. Sure I can have a look over brakes too while I'm at it. RE: Zx track time @ fcs - help? - Piggy - 31-05-2016 Find a fridge...rip the side off...lash up some shrowding... Done. /NotwhatIdidarall RE: Zx track time @ fcs - help? - Paul Baldwin - 31-05-2016 (31-05-2016, 06:12 PM)Piggy Wrote: Find a fridge...rip the side off...lash up some shrowding... Interesting you say that. There's a dead freezer out the back of mine at the mo and I have an angle grinder..... Looking forward to trying out my new, very old mig anyway RE: Zx track time @ fcs - help? - bashbarnard - 31-05-2016 shouldve dropped me a message a few weeks back could've organised a day at the works workshop with all eqipment for you. with me supervising obviously. bit short notice for me to lend a hand now though RE: Zx track time @ fcs - help? - darrenjlobb - 31-05-2016 Would have obviously offered my help / workshop Tom for pump tuning / wheel bearings in press etc, but bit far away for short notice RE: Zx track time @ fcs - help? - zx_volcane - 31-05-2016 (31-05-2016, 05:04 PM)Ruan Wrote: DANGER TO MANIFOLD! FLOL (31-05-2016, 05:28 PM)Dum-Dum Wrote: I'd offer to help as I've not long cracked open a 5l bottle of DOT4 and have a bleeder but I'm now tied up with work and stuff till FCS (31-05-2016, 06:12 PM)Piggy Wrote: Find a fridge...rip the side off...lash up some shrowding... (31-05-2016, 06:17 PM)Paul Baldwin Wrote:(31-05-2016, 06:12 PM)Piggy Wrote: Find a fridge...rip the side off...lash up some shrowding... (31-05-2016, 06:47 PM)bashbarnard Wrote: shouldve dropped me a message a few weeks back could've organised a day at the works workshop with all eqipment for you. with me supervising obviously. bit short notice for me to lend a hand now though (31-05-2016, 06:49 PM)darrenjlobb Wrote: Would have obviously offered my help / workshop Tom for pump tuning / wheel bearings in press etc, but bit far away for short notice Thanks all, was a last min decision to buy Dumdums tracktime Cheers to Paul who is gonna lend his time and skills on Friday Looks like sorted a set of part worn ps3 for tyres, need to source some rims to stick them on. RE: Zx track time @ fcs - help? - Piggy - 31-05-2016 Bash has some yellow clones RE: Zx track time @ fcs - help? - zx_volcane - 31-05-2016 (31-05-2016, 08:32 PM)Piggy Wrote: Bash has some yellow clones if only i didn't think they'd look absolutely gash on a zx RE: Zx track time @ fcs - help? - Piggy - 31-05-2016 I think they'd look better than you sat in the pits with a useless track time ticket Zx track time @ fcs - help? - zx_volcane - 01-06-2016 Tyres sorted RE: Zx track time @ fcs - help? - Xsikid - 01-06-2016 Hope your list is getting smaller bud Zx track time @ fcs - help? - zx_volcane - 01-06-2016 Not massively :/ RE: Zx track time @ fcs - help? - Xsikid - 01-06-2016 Ah not good bud RE: Zx track time @ fcs - help? - zx_volcane - 01-06-2016 Find a set of tyres to run - 15" size Replace front wheel bearings - ordered Relocate fmic for better airflow Service brakes / change fluid Setup fuel pump Find spare bumper to make holes in for airflow Replace rear beam mounts - prob won't have time Have managed to sort tyres, and hopefully some spare steels to put them on to Spare front bumper to abuse for airflow has been sourced Been making adjustments to the fuel pump on a couple of long runs I did today - getting there with EGTs, don't rise as fast now and off boost fueling has been tipped in a bit more. May have to just drop fuelling / boost / power right down to make sure temps stay good on track. Hopefully have enough time Friday to change brake fluid, replace wheel bearings, get tyres knocked on and balanced + re-jig FMIC mounting and knock up some cowling. RE: Zx track time @ fcs - help? - Xsikid - 01-06-2016 Hope you get time bud RE: Zx track time @ fcs - help? - ginge191 - 02-06-2016 I'll buy your track time when alltheboost splits your head apart.. Thanks. In all seriousness. I'll be around Friday and Saturday with my toolbox if you need a hand with anything RE: Zx track time @ fcs - help? - zx_volcane - 02-06-2016 (02-06-2016, 06:53 AM)ginge191 Wrote: I'll buy your track time when alltheboost splits your head apart.. Thanks. Hohoho - cheers dude for offer of help, reckon can get a pit crew together? block change in sub 14seconds... Forgot I also need to add injectors to list of things to check over too. |