+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Project 16v #theLEMOAN (/showthread.php?tid=33471)
RE: Project 16v #LEMON - Eeyore - 08-11-2016
pictures and how much was it? as said above, why dont you ask to return it?
RE: Project 16v #LEMON - zx_volcane - 08-11-2016
(08-11-2016, 05:43 PM)Eeyore Wrote: pictures and how much was it? as said above, why dont you ask to return it?
meh let it lie before this adds another 10 pages of nonsense to an otherwise exciting thread.
more engine updates please
about time a turbo was attached I think?
RE: Project 16v #LEMON - Piggy - 08-11-2016
(08-11-2016, 05:42 PM)HDi--Power Wrote: Would you not just give the car back to him? There are certain protections the Uk offers to private sales, especially if you have messages backing up your questions, he sounds like a bit of a chancer! Confrontation is always better than rolling over and taking it
In further messaging, blocking, faffing, mates messaging him...
He has been very abusive and threatened all parties. so I think better move on now as tom says.
(08-11-2016, 05:46 PM)zx_volcane Wrote:(08-11-2016, 05:43 PM)Eeyore Wrote: pictures and how much was it? as said above, why dont you ask to return it?
meh let it lie before this adds another 10 pages of nonsense to an otherwise exciting thread.
more engine updates please
about time a turbo was attached I think?
Indeed.
Engine was dropped onto pallet Sunday ready for flywheel and gearbox...then I can begin manifold building
RE: Project 16v #LEMON - Dum-Dum - 08-11-2016
(08-11-2016, 05:46 PM)zx_volcane Wrote:(08-11-2016, 05:43 PM)Eeyore Wrote: pictures and how much was it? as said above, why dont you ask to return it?
meh let it lie before this adds another 10 pages of nonsense to an otherwise exciting thread.
more engine updates please
about time a turbo was attached I think?
Yes, exactly this!
Come on Piggy, more engine.
And what are the plans for project lemon other than getting engine shinys?
RE: Project 16v #LEMON - cully - 08-11-2016
(08-11-2016, 02:27 PM)Piggy Wrote: He was a "nice" guy in person too, partner was friendly etc. Had no reason to doubt him.
so was Jimmy savile look at all them kids he made smile!
RE: Project 16v #LEMON - Piggy - 08-11-2016
(08-11-2016, 06:26 PM)Dum-Dum Wrote:(08-11-2016, 05:46 PM)zx_volcane Wrote:(08-11-2016, 05:43 PM)Eeyore Wrote: pictures and how much was it? as said above, why dont you ask to return it?
meh let it lie before this adds another 10 pages of nonsense to an otherwise exciting thread.
more engine updates please
about time a turbo was attached I think?
Yes, exactly this!
Come on Piggy, more engine.
And what are the plans for project lemon other than getting engine shinys?
Rebuilt brakes, decent suspension and new beam essentially.
Then its time to get on with Kev.
RE: Project 16v #LEMON - Paul Baldwin - 09-11-2016
A lesson to all involved that read this thread tbh imo. Don't buy blind no matter what you want the world to be unless you know them very well and have earned each others trust. I had the same outlook once, some people are epic, some are $%$£&
Every second post of Piggys involves money and paring things down to the bone, backed up by For Sales threads on the other parts of the Forum. Something tells me he didn't exactly pay over the odds for this or the deal wouldn't have been done?
Even if you lost out this time, with the effort you put in it should more than balance out.
Caveat Emptor as said above. Swings and roundabouts......
James. Hopefully you'll persevere and turn this into an even more useful tool than the current one :-)
RE: Project 16v #LEMON - Piggy - 13-11-2016
Poxy ruddy day
Was a day "off"... First in weeks. But I felt i could make good progress with this engine....
Well. I didnt. Fitted waterpump and a couple of seals was the days efforts in results
RE: Project 16v #LEMON - allye - 13-11-2016
I have days like that, simple or small jobs just seem to take forever or your head just isn't in it!
Just got to keep chipping away.
RE: Project 16v #LEMON - Piggy - 13-11-2016
My head was in it this morning
For ref for anyone...
If you use a 8v block and 16v head... You need a 144tooth belt...not a 141 belt as I was led to believe.
Project 16v #LEMON - bashbarnard - 13-11-2016
141 tooth is the 8v one, so you need a 144 which is the 2.2 belt yes??
Sent from my iPhone using Tapatalk
RE: Project 16v #LEMON - Piggy - 13-11-2016
Nope and yup.
141 is 8v.
144 is 2.0 16v hdi (dont confuse with 114 belt for the 16v hdi running pump on cam)
146 is 2.2 16v hdi
Project 16v #LEMON - bashbarnard - 13-11-2016
(13-11-2016, 07:03 PM)Piggy Wrote: Nope and yup.
141 is 8v.
144 is 2.0 16v hdi (dont confuse with 114 belt for the 16v hdi running pump on cam)
146 is 2.2 16v hdi
Just trying to make it clear if anyone else wants to do it, its a good thing having a few threads to refer to
Sent from my iPhone using Tapatalk
RE: Project 16v #LEMON - Piggy - 14-11-2016
Doh. Gti6 flywheel has no timing pin hole...didn't realise. Xu10 noob.
So guna have to dial gauge it...
RE: Project 16v #LEMON - Stef205 - 14-11-2016
my gti6 flywheel did....
RE: Project 16v #LEMON - Piggy - 14-11-2016
(14-11-2016, 08:43 PM)Stef205 Wrote: my gti6 flywheel did....
Did you drill one?
RE: Project 16v #LEMON - Stef205 - 14-11-2016
nope, this is the oem flywheel im talking about the new ttv flywheel doesnt.
RE: Project 16v #LEMON - Piggy - 14-11-2016
(14-11-2016, 09:13 PM)Stef205 Wrote: nope, this is the oem flywheel im talking about the new ttv flywheel doesnt.
I have a standard oem gti flywheel...no timing hole. Afaik they are timed on cambelt end.
RE: Project 16v #LEMON - luke306rallye - 14-11-2016
http://www.306gti6.com/forum/showthread.php?id=40662
RE: Project 16v #LEMON - Dum-Dum - 14-11-2016
Dude that thing is so clean it looks like a crate engine.
RE: Project 16v #LEMON - Stef205 - 14-11-2016
(14-11-2016, 09:22 PM)luke306rallye Wrote: http://www.306gti6.com/forum/showthread.php?id=40662
BOOM!
RE: Project 16v #LEMON - Piggy - 14-11-2016
Cant see those images.
Here is the back of the gti6 flywheel:
Note all holes there are drilled balancing holes.
(14-11-2016, 09:35 PM)Dum-Dum Wrote: Dude that thing is so clean it looks like a crate engine.
Hammerite in a spray can and filter for the win
http://www.306gti6.com/forum/showthread.php?id=120387
RE: Project 16v #LEMON - Eeyore - 15-11-2016
looks good mate!
now you just need to show us the rest of the car!
RE: Project 16v #LEMON - cully - 15-11-2016
no timing hole in my std GTI6 flywheel
Project 16v #LEMON - zx_volcane - 15-11-2016
Stick an xud wheel over it and drill a timing hole in? Or you going to pull the head and tdc it with a dial gauge?
Sent from my iPhone using Tapatalk Pro
Project 16v #LEMON - bashbarnard - 15-11-2016
Again no hole when i used a gti6 flywheel, i put an the standard flywheel on timed up then swapped.
Sent from my iPhone using Tapatalk
RE: Project 16v #LEMON - Piggy - 15-11-2016
Just going to use injector hole with dial gauge. Got no hdi/xud flywheel to time by or check so... Have to be the dial gauge as much as I would prefer a nice simple timing hole/pin.
RE: Project 16v #LEMON - welshpug - 15-11-2016
indeed, no xud pin hole on any xu flywheel i have ever seen.
RE: Project 16v #LEMON - Piggy - 15-11-2016
(15-11-2016, 12:51 PM)welshpug Wrote: indeed, no xud pin hole on any xu flywheel i have ever seen.
Thanks for confirming...thought I was going crazy
RE: Project 16v #LEMON - welshpug - 15-11-2016
look at the crank pulley keyway, if the dw/xud pins at tdc itll be pointing straight up (or down...)
on an xu it points straight back along the deck when pinned with a standard xu pulley.