306oc - Peugeot 306 Owners Club & Forum
compbrake quickshift fitting / adjustment - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19)
+--- Thread: compbrake quickshift fitting / adjustment (/showthread.php?tid=33469)

compbrake quickshift fitting / adjustment - zx_volcane - 10-03-2016

got a compbrake quickshift

grubscrews are no good and collars moved within about 3 seconds of fitting it so took it straight off.

This was a while a go, and im considering putting it back on

Have drilled the offending grub screws out, becasue of course they round as soon as they smell a hex key

so

whereabouts do i want this badboy before i weld the collars in position?

too short and I know its going to be an arse getting into gear, too long and whats the point?


input appreciated

RE: compbrake quickshift fitting / adjustment - Paul_13 - 10-03-2016

Get a pic of the item mate.
If it's the one I'm thinking of its fit for the bin.

Compbrake still is shit/borderline dangerous

RE: compbrake quickshift fitting / adjustment - zx_volcane - 10-03-2016

this is the happy chappy >>>
[Image: p-956-cmb0331_pug-206-306-qs_3.jpg]

RE: compbrake quickshift fitting / adjustment - welshpug - 10-03-2016

the main issue is the collars are wanking about on the shaft, sleeve the shaft up to the size of the collars, and the grub screws should work better.

I'd personally put it where the standard one was, the shift length is about right as standard if there's no play in anything, half the play will be on the subframe quadrant.

RE: compbrake quickshift fitting / adjustment - zx_volcane - 10-03-2016

(10-03-2016, 02:22 PM)welshpug Wrote: the main issue is the collars are wanking about on the shaft, sleeve the shaft up to the size of the collars, and the grub screws should work better.

I'd personally put it where the standard one was, the shift length is about right as standard if there's no play in anything, half the play will be on the subframe quadrant.

yeah the collars move and its turns to mush

so, fix it so the rose joint is where the original ball was? or a different position for similar throw.

i can't just fit and fettle, as the collars are all goosey loosey now ive drilled the cheesy grub screws out. gonna zap them in position with the firestick

RE: compbrake quickshift fitting / adjustment - Piggy - 10-03-2016

I can measure mine? Or you can come try mine, then measure?

I welded the one underneath and used spacers for top one so if needs be can still remove it.