+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: Bosch pump to bracket bottom bolt (/showthread.php?tid=31955)
Bosch pump to bracket bottom bolt - blinkyeatu - 20-09-2015
Any tips on slackening the bottom bolt that holds the pump to the bracket
RE: Bosch pump to bracket bottom bolt - Jonny81191 - 20-09-2015
You ideally need a half moon spanner, but it can be done with a cut down 13mm
RE: Bosch pump to bracket bottom bolt - bashbarnard - 20-09-2015
If you haven't got a c spanner. (I bought onto to do it on mine) then alternator belt off. Remove the 13mm top alternator bolt then slacken the bottom one and tilt forward. Super easy access then. However if your XUD has pas on the top I feel sorry for you and I have no advice
RE: Bosch pump to bracket bottom bolt - blinkyeatu - 20-09-2015
Achh balls I've taken to removing the bracket just working on the back bolt fraction by fraction how mimportant is it that I use a new cam belt cause I've only just put this one on and really don't want to have to do the whole thing again
FYI I do have power steering that's what was doing me in
RE: Bosch pump bracket studs? - blinkyeatu - 28-09-2015
On the bracket are the studs meant to be in the more adv or regard postion
RE: Bosch pump to bracket bottom bolt - Uberderv - 30-09-2015
If I understand you properly, the Adv position.