306 rallye trackday project - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20) +--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3) +--- Thread: 306 rallye trackday project (/showthread.php?tid=28088) |
RE: 306 rallye trackday project - adam b - 11-02-2015 Surely you have to keep to minimum weights though... RE: 306 rallye trackday project - twangy - 11-02-2015 (11-02-2015, 12:19 AM)adam b Wrote: Surely you have to keep to minimum weights though... no adam ,not for trackday car , and if I have to keep to a set weight for racing will add ballast and corner weight ,thanks wayne RE: 306 rallye trackday project - Eeyore - 11-02-2015 want! D: RE: 306 rallye trackday project - twangy - 12-02-2015 bonded lexan rear screen in carbon rear hatch skin ,ready for fitting RE: 306 rallye trackday project - twangy - 13-02-2015 bourght this as will be adding throttle bodies ,will be making mould and making carbon fibre copies RE: 306 rallye trackday project - adam b - 13-02-2015 Mine is sitting at about 990kg at the moment but it has a much bigger cage and only a fg bonnet. Not too fussed about getting it much lighter, mostly because it's going to get expensive (except shrinking my sizeable arse). At the moment I'm moving weight backwards and inside the wheelbase. What fun! Definitely a car to follow RE: 306 rallye trackday project - twangy - 14-02-2015 (13-02-2015, 08:22 PM)adam b Wrote: Mine is sitting at about 990kg at the moment but it has a much bigger cage and only a fg bonnet. RE: 306 rallye trackday project - twangy - 16-02-2015 fitted rear hatch over weekend on original hinges so will still open mega weight saving RE: 306 rallye trackday project - af1 - 17-02-2015 Wow, this is just stunning! RE: 306 rallye trackday project - twangy - 17-02-2015 (17-02-2015, 11:51 AM)af1 Wrote: Wow, this is just stunning! thanks very much RE: 306 rallye trackday project - 7057sam - 18-02-2015 The cossie's epic mate Must make the 306 feel pretty boring ?? RE: 306 rallye trackday project - twangy - 18-02-2015 (18-02-2015, 01:10 AM)7057sam Wrote: The cossie's epic mate yes sam , the 306 feel pretty boring compared to cossie , but a hell of a lot cheaper RE: 306 rallye trackday project - twangy - 19-02-2015 fitted carbon bonnet skin, works on original hinges so no need for 4 bonnet pins , just fitted front recessed bonnet pins and started flatting ready for painting ,another great weight saving RE: 306 rallye trackday project - aaddzz123 - 19-02-2015 I wish I had the skills and knowledge to make carbon and fiberglass parts. Nice work mate. RE: 306 rallye trackday project - twangy - 19-02-2015 (19-02-2015, 03:15 PM)aaddzz123 Wrote: I wish I had the skills and knowledge to make carbon and fiberglass parts. Nice work mate. thanks very much mate RE: 306 rallye trackday project - twangy - 19-02-2015 started to trial fit carbon door on drivers side and have laid passenger side outer skin ,so will remove tomorrow and bond to inner skin ,and hopefully have both fitted over weekend depending on weather RE: 306 rallye trackday project - twangy - 24-02-2015 carbon fibre front panel , was done a while back and fitted , have got to super fine and laquer ,with a load of other bit I have made , eg rear carbon spoiler phase 2 RE: 306 rallye trackday project - adam b - 24-02-2015 Very good to meet you yesterday Shame I couldn't have stopped longer for more of a chat! RE: 306 rallye trackday project - twangy - 24-02-2015 (24-02-2015, 06:59 PM)adam b Wrote: Very good to meet you yesterday next time your down this way and have more time call in ,may have thing a little more organized by then ,thanks wayne RE: 306 rallye trackday project - twangy - 25-02-2015 sorry for lack of progress due to sh**ty weather but going threw photo's and came across this what I did to car , good weight saving and stops getting dnf on rally's was to mount wiring socket on bulkhead , due to Peugeot's crappy idea of running along front and first thing you hit ends up blowing wiring , there is a good weight saving by doing this and well out of harms way ,sorry for crappy picture as was when first done RE: 306 rallye trackday project - twangy - 05-03-2015 haven't had much chance to do much on car lately due to weather and other commitments , but got too it today and fitted discs and bells that had lying round from when had cosworth , 1kilo lighter than standard disc per side unsprung weight , and 25mm thickness , using standard calipers for now as pagid blues only done 1 track day ,so not letting them go to waste ,plenty of clearance on bottom joint RE: 306 rallye trackday project - 7057sam - 06-03-2015 That looks great what size are they and does it change the pcd of the wheel so you have to run ford fitment wheels? RE: 306 rallye trackday project - twangy - 06-03-2015 (06-03-2015, 12:02 PM)7057sam Wrote: That looks great what size are they and does it change the pcd of the wheel so you have to run ford fitment wheels? size is 285mm , thickness is 25mm and ford is 108pcd same as Peugeot RE: 306 rallye trackday project - twangy - 18-03-2015 finished making carbon fibre rear spoiler ,and manage to clear laquer and also made carbon fibre cam cover , just got to trim were oil filler goes RE: 306 rallye trackday project - 7057sam - 18-03-2015 They look great,would ever make any spoilers up?? RE: 306 rallye trackday project - twangy - 18-03-2015 (18-03-2015, 04:14 PM)7057sam Wrote: They look great,would ever make any spoilers up?? will do as soon as have got workshop set up and back on 2 legs sam RE: 306 rallye trackday project - 7057sam - 18-03-2015 (18-03-2015, 04:17 PM)twangy Wrote:(18-03-2015, 04:14 PM)7057sam Wrote: They look great,would ever make any spoilers up?? Of course mate hope your recovery is going well Do you make moulds of everything you do so you can replicate it again?? RE: 306 rallye trackday project - Piggy - 18-03-2015 Sweet work! RE: 306 rallye trackday project - twangy - 18-03-2015 (18-03-2015, 09:49 PM)7057sam Wrote:(18-03-2015, 04:17 PM)twangy Wrote:(18-03-2015, 04:14 PM)7057sam Wrote: They look great,would ever make any spoilers up?? yes sam , keep mould so can replicate most thing (18-03-2015, 09:50 PM)Piggy Wrote: Sweet work! cheers mate RE: 306 rallye trackday project - twangy - 11-05-2015 finally able to start weight bearing on leg ,so back on car ,have got paint for carbon panels and ,primed and painted rear hatch today ,so will fit and prep and paint another panel tomorrow , will add pictures this week of progress ,also made new carbon dash inserts |