+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XU Petrol Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=17)
+--- Thread: Your BHP/Torque Figures (/showthread.php?tid=27649)
Your BHP/Torque Figures - MY95 - 07-11-2014
What's everyone running? (ATF/ATW)
Is it worth stickying it like they have for the HDI and XUD on the forum?
RE: Your BHP/Torque Figures - Dum-Dum - 07-11-2014
Mine may go on the dyno before the Christmas meet as I want to check she is healthy before I start tuning her.
RE: Your BHP/Torque Figures - Niall - 07-11-2014
Yeah could do this like the one in the dirty diesel section so people know what spec they need to get what power
Standard XU10J4RS Engine
M45 Supercharger producing 5psi currently with a 67mm pulley
440cc injectors
'Rich W' Inlet
Megane RS intercooler with 2.25" pipework
2.5" stainless exhaust, 2 boxes and a 200 cell sports cat
Omex 600
215bhp @ 7150rpm, 180lb/ft @ 3900rpm
RE: Your BHP/Torque Figures - Stef205 - 07-11-2014
(07-11-2014, 05:44 PM)Niall Wrote: Yeah could do this like the one in the dirty diesel section so people know what spec they need to get what power
Standard XU10J4RS Engine
M45 Supercharger producing 5psi currently
440cc injectors
215bhp @ 7150rpm, 180lb/ft @ 3900rpm
Can I correct some thing here
Technically it's a m65 charger I don't want people confusing it with the good mini m45
Also state your charger pulley size?
RE: Your BHP/Torque Figures - Niall - 07-11-2014
(07-11-2014, 05:50 PM)Stef205 Wrote:(07-11-2014, 05:44 PM)Niall Wrote: Yeah could do this like the one in the dirty diesel section so people know what spec they need to get what power
Standard XU10J4RS Engine
M45 Supercharger producing 5psi currently
440cc injectors
215bhp @ 7150rpm, 180lb/ft @ 3900rpm
Can I correct some thing here
Technically it's a m65 charger I don't want people confusing it with the good mini m45
Also state your charger pulley size?
M65 is the Mercedes model number. M45 is the Eaton model and is a direct relation to the amount of air it flows which is identical to your old mini one.
67mm pulley
RE: Your BHP/Torque Figures - ozonehostile - 07-11-2014
My gti6 made 173.1bhp and, can't remember the torque without seeing the graph (will
update)
Standard engine just with all genuine pug service parts, huge k&n filter and a magnex catback exhaust
RE: Your BHP/Torque Figures - Stef205 - 07-11-2014
Xu10j4rs
Custom triangle inlet manifold
380cc injectors
Mini m45 supercharger
65mm pulley
2.5" 3 box exhaust system
Omex 600
2.5" intercooler and pipe work.
205bhp @3psi
Xu10j4rs
Jek fabrications inlet
Flowed throttle body
Eaton m90 gen 3 supercharger
Reduced c/p and 2.5" s/c pulley
380cc injectors
2.5" 3 box exhaust system
2.5" intercooler and pipe work
Omex 600
220bhp atw (+-)
Torque unknown
0.6 bar
RE: Your BHP/Torque Figures - miles - 07-11-2014
Std Gti6 with my Stainless CAT back exhaust, Tested twice so average 172bhp, Mind this is with a engine with 265,000 on it at the time.
The HG went at 275,000 which considering I cannot complain
Other GTi
Sanez Rods, JE Pistons, Mild Headwork, Cat Cams, Solid Lifters, 4-2-1 race manifold and 2.5" system, Omex 600, Jenvey bodies and long inlet is the right side of 250bhp is all I can say
Who needs forced induction, LOL
RE: Your BHP/Torque Figures - Janne L - 09-11-2014
K/N 57i filter, 2,25" supersprint exhaust with race cat. Both intake and exhaust cams advanced as far as the stock pullies allow. And there is some sort of chip in the ECU with unknown settings.
One bad cylinder with low compression.
123,8 hp
168,9 Nm
![[Image: wheels_hk.jpg]](http://janne.levenrot.se/bilder/bilar/wheels_hk.jpg)
RE: Your BHP/Torque Figures - blaze_the_6 - 11-11-2014
(07-11-2014, 11:54 PM)miles Wrote: Std Gti6 with my Stainless CAT back exhaust, Tested twice so average 172bhp, Mind this is with a engine with 265,000 on it at the time.
The HG went at 275,000 which considering I cannot complain
Other GTi
Sanez Rods, JE Pistons, Mild Headwork, Cat Cams, Solid Lifters, 4-2-1 race manifold and 2.5" system, Omex 600, Jenvey bodies and long inlet is the right side of 250bhp is all I can say
Who needs forced induction, LOL
My god thats some motor. almost unbelievable!!!
RE: Your BHP/Torque Figures - miles - 11-11-2014
There's more coming out of it this winter, 8 injectors, Some more refinement as this was just Evo 1 version