+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19)
+--- Thread: Do phase 3 1.4 petrol shafts and hubs fit hdi? (/showthread.php?tid=21310)
Do phase 3 1.4 petrol shafts and hubs fit hdi? - maguire1992 - 12-02-2014
Just curious as I'm breaking a petrol one and i need a hub
RE: Do phase 3 1.4 petrol shafts and hubs fit hdi? - underground375 - 12-02-2014
With the hubs there are to different ball joint sizes. One been 16mm and the other been 18mm. The early cars you will find normally come with 16mm hubs. The springs will sit differently due to the weight of both engines.
RE: Do phase 3 1.4 petrol shafts and hubs fit hdi? - Alan_M - 12-02-2014
Nope. Got both a 1.4 and HDi...the shafts are substantially bigger and don't forget the 1.4 box is different to the BE type HDi box.
RE: Do phase 3 1.4 petrol shafts and hubs fit hdi? - welshpug - 13-02-2014
if its an ABS car the hubs will fit.
RE: Do phase 3 1.4 petrol shafts and hubs fit hdi? - maguire1992 - 17-02-2014
But does the drive shaft of a hdi fit through the centre of a 1.4 hub?
RE: Do phase 3 1.4 petrol shafts and hubs fit hdi? - Mattcheese31 - 18-02-2014
(17-02-2014, 11:58 PM)maguire1992 Wrote: But does the drive shaft of a hdi fit through the centre of a 1.4 hub?
Pretty sure it will mate yes.