![]() |
what engie mods can i do ? - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16) +--- Forum: TU Petrol Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=18) +--- Thread: what engie mods can i do ? (/showthread.php?tid=12141) |
what engie mods can i do ? - lenny_pug98 - 22-03-2013 hi guys was woundering if any of you pug lovers know of any ways to tune the egine id love to put a new engine in but cant afford it atm but atm just want to tune engine as much as possible ![]() ![]() RE: what engie mods can i do ? - Dan! - 22-03-2013 If its a 1.4 then you will be best off just stripping loads of weight and getting a nice cold air induction/exhaust. But dont expect to see much power gain, its not a tuner engine to be honest with you ![]() RE: what engie mods can i do ? - sam - 22-03-2013 Hench v8 ![]() ![]() RE: what engie mods can i do ? - lozz - 22-03-2013 Change the inlet manifold for one off a saxo 1.6 Or a 306 1.6 Why does most people on here say it ain't tuneable It is, RE: what engie mods can i do ? - Blandy - 22-03-2013 Anything is tuneable if you throw money at it only thing is realistically the money spent for the gains will be poor as with a lot of n/a cars RE: what engie mods can i do ? - Piggy - 22-03-2013 yeah buy a turbo or supercharger kit, one off set of forged rods, uprated headbolts and gasket, stand alone management and wahaay! its tuned and has huge bhp..... with enough money anything is possible.... RE: what engie mods can i do ? - lenny_pug98 - 22-03-2013 i will start stripping it out in the morning ![]() ![]() RE: what engie mods can i do ? - Piggy - 22-03-2013 Just note....ensure its running 100%....induction mods on a 1.4 will only change the sound...you wont see gains, you may even loose some power... a well serviced 1.4 will outrun a diy tuned one anyday... loo RE: what engie mods can i do ? - sam - 22-03-2013 I had a diablo 5 door, started out as a 1.4 then what I thought was the headgasket witch ended up being a coolant hose leeking I had a 6 lump put in best time of my live driving that tbh id have that back over my astor 6 now RE: what engie mods can i do ? - lenny_pug98 - 22-03-2013 yeah engine runs sweet as but i will give it a service aswell also quick question will a 1.6 manifold bolt straight on to my 1.4 silly question i know but im new to this and dont know alot about the tu engine ![]() ![]() RE: what engie mods can i do ? - Piggy - 22-03-2013 just save up ya money matey....HGs are bad for going on these and you wont see much bang for buck on tuning unless its big bucks RE: what engie mods can i do ? - sam - 22-03-2013 Tbh if you want to stick with the 1.4 I wouldnt worrie about the 1.6 manifold, 1.3 106 rallye head and inlet manifold and a 4-2-1 exhaust manifold and youll be around the 100hp mark, mate did it to his quicksilver and the flew kept up with loads of 106 gti's RE: what engie mods can i do ? - lenny_pug98 - 22-03-2013 i have started saving for a bigger enginged 306 but i was only going to tune my car a little as i only got to drive it for another year or so just untill i can afford to buy a 2liter RE: what engie mods can i do ? - sam - 22-03-2013 For the conversion cost you might aswell buy a 6 anyway dude ![]() RE: what engie mods can i do ? - lenny_pug98 - 22-03-2013 yeah mate i just has a look at the 6 conversion and it costs loads of dosh ![]() RE: what engie mods can i do ? - darrenjlobb - 22-03-2013 Strip the crap out of it, you will be shocked at the difference! RE: what engie mods can i do ? - lenny_pug98 - 22-03-2013 i will start stripping it out in the morning mate cheers RE: what engie mods can i do ? - sam - 22-03-2013 Were abouts is bordon? Is it a 5 door or 3 door? RE: what engie mods can i do ? - lenny_pug98 - 22-03-2013 actully live in whitehill witch is other end of bordon but anywere in bordon really mate and its a 5door RE: what engie mods can i do ? - sam - 22-03-2013 How far you away from andover? RE: what engie mods can i do ? - lenny_pug98 - 22-03-2013 about 1hour away mate RE: what engie mods can i do ? - sam - 22-03-2013 So really not for from most of us then RE: what engie mods can i do ? - lenny_pug98 - 22-03-2013 no not really witch is good ![]() |