+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: Bens bosch conversion dont use the wrong key! (/showthread.php?tid=2673)
Re: Bosch Conversion help. go to last post. It has no oomph - mark_airey - 25-04-2012
Ben Jay Wrote:right no exlamation marks from now on!
Well thats not started well
Re: Bosch Conversion help. go to last post. It has no oomph - ginge191 - 25-04-2012
Maybe this is how we're on page 7 and no closer to fixing this problem... :roll:
Re: Bosch Conversion help. go to last post. It has no oomph - Ben Jay - 25-04-2012
we are!
we have it running! just not very well!
Re: Bosch Conversion help. go to last post. It has no oomph - Dan! - 25-04-2012
ginge191 Wrote:Maybe this is how we're on page 7 and no closer to fixing this problem... :roll:
How do you work that one out?!
Re: Bosch Conversion help. go to last post. It has no oomph - Ben Jay - 25-04-2012
so far you guys have helped me work out where to find the woodruff key, how to plum it up and now the only issue is the timing. which is probably a tooth out! pretty successfull thread i think!
Re: Bosch Conversion help. go to last post. It has no oomph - Dave - 25-04-2012
I cant work out wether you just sat the pump on your engine and expected it to work or not?
Re: Bosch Conversion help. go to last post. It has no oomph - Ben Jay - 25-04-2012
no i put some bolts on it aswell!
Re: Bosch Conversion help. go to last post. It has no oomph - ginge191 - 25-04-2012
Re: Bosch Conversion help. go to last post. It has no oomph - Dan! - 25-04-2012
This sorted yet?
Re: Bosch Conversion help. go to last post. It has no oomph - Ben Jay - 25-04-2012
Not yet. I didn't get a chance tonight to check but I took a video and some pictures
Re: Bosch Conversion help. go to last post. It has no oomph - Ben Jay - 26-04-2012
Re: Bosch Conversion help. go to last post. It has no oomph - Dan! - 26-04-2012
Cant waitch the video at work, but from the photos its pretty much fully advanced? Have you double checked the cambelts right?
Re: Bosch Conversion help. go to last post. It has no oomph - Ben Jay - 26-04-2012
Dan! Wrote:Cant waitch the video at work, but from the photos its pretty much fully advanced? Have you double checked the cambelts right?
well apart from not locking the crank up yet and checking if its a tooth out it seems to be!
Re: Bosch Conversion help. go to last post. It has no oomph - Dave - 26-04-2012
So thats actually a no then.
You need to go back and re-read this thread, your issue has already been said.
Re: Bosch Conversion help. go to last post. It has no oomph - Ben Jay - 26-04-2012
i didnt get a chance last night to have a play but from what you guys see is it too far advanced?
so could that mean there definatly is a tooth out?
Re: Bosch Conversion help. go to last post. It has no oomph - Dan! - 26-04-2012
It says to me that its either a tooth out or the pump has a problem.
Re: Bosch Conversion help. go to last post. It has no oomph - Ben Jay - 26-04-2012
right at least i know what area to start looking in. will update tonight or tomorrow!
Re: Bosch Conversion help. go to last post. It has no oomph - bigcheez2k3 - 26-04-2012
When you move the throttle arm how you were it should start revving it's tits off immediately, that seemed really delayed.
Re: Bosch Conversion help. go to last post. It has no oomph - Ben Jay - 26-04-2012
yea its very un responsive on the throttle
Re: Bosch Conversion help. go to last post. It has no oomph - Ben Jay - 26-04-2012
Right who was the first to suggest 1 tooth?
Re: Bosch Conversion help. go to last post. It has no oomph - darrenjlobb - 26-04-2012
Mate,
CHECK YOUR TIMING
Dont bother replying to this thread until there is a photo of the crank / pump / cam pegged in tdc....
At that point, people can start suggest potential pump issues etc.... until then, check it, as about 50,000 people have already told you to...jewiz
Re: Bosch Conversion help. go to last post. It has no oomph - Ben Jay - 26-04-2012
its working! due to 1 tooth being out! has a bit of a rough idle but nothing that can be fixed. seems like it "searches" for a good rpm
Re: Bosch Conversion help. go to last post. It has no oomph - Dan! - 26-04-2012
The hunting idle might be because of it still being a bit retarded or still having some air in the system. If its just air it will fix itself after a good drive. How far advanced is the pump now?
Re: Bosch Conversion help. go to last post. It has no oomph - Ben Jay - 26-04-2012
as it was above. starts really well now. ill have to drive it tomorrow then have a play with it on sat. those 6mm to 3mm T peices came today so the gauge should be installed on sat too!
Re: Bens guide on how not to do a bosch conversion! (with he - ginge191 - 29-04-2012
Ok, i've just come off the phone from ben and it seems to still not start at all.
I'm not a professional, but comparing his pump to mine over facetime, it seemed his pump was sitting very far forward?
yellow - ben' sits
white - mine sits
![[Image: UlTd2.png]](http://i.imgur.com/UlTd2.png)
Re: Bens guide on how not to do a bosch conversion! (with he - 4WayDiablo - 29-04-2012
Hoe far is your advanced though ginge? Or retarded
Re: Bens guide on how not to do a bosch conversion! (with he - ginge191 - 29-04-2012
4WayDiablo Wrote:Hoe far is your advanced though ginge? Or retarded
well i know my pump starts fine..
lol how can i tell you? its seated further back than bens?
Re: Bens guide on how not to do a bosch conversion! (with he - Poodle - 30-04-2012
What's the difference mm-wise from the nearest edge of the cylinder head..?
Re: Bens guide on how not to do a bosch conversion! (with he - mark_airey - 30-04-2012
It should be roughly 3/4 of the way around the slots with the top of the pump towards the engine......... but you can't really tell from that pic because of the angle of it photo and because there are no real reference points in shot.......... a pic of an actual bolt and slot on the bracket would help though.
Re: Bens guide on how not to do a bosch conversion! (with he - stevieg - 02-05-2012
hmm
when ever i have done pump swaps i just listen for when it sounds 'right' for a diesel, find where it gets clattery and put it back a little bit