+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Mitch's Blaze D-Turbo (/showthread.php?tid=13975)
RE: Blaze D-Turbo, Soon to be phase 1. - Jesskendall123 - 12-01-2014
Both look nice
RE: Blaze D-Turbo, Soon to be phase 1. - Mitch - 28-01-2014
Dont know what to do with this, had it over 3 years now, the ph1 front end is still in the bodyshop and nothing has really happened to it, may end up either selling or breaking..
RE: Blaze D-Turbo, Soon to be phase 1. - Dean - 28-01-2014
If the PH1 front end is painted, i'll have it
.
Re: Blaze D-Turbo, Soon to be phase 1. - aggyj17 - 28-01-2014
[attachment=13161]
Ph1 ftw
RE: Blaze D-Turbo, Soon to be phase 1. - Mitch - 28-01-2014
(28-01-2014, 08:43 PM)Dean Wrote: If the PH1 front end is painted, i'll have it
Unfortunately its not, found out when i was looking into it that there is two different shades of blaze yellow..
RE: Blaze D-Turbo, Soon to be phase 1. - ozonehostile - 29-01-2014
f*ck off breaking everything!
Your blaze is genuinely one of the tidiest examples I've seen. Phase 1 it and crack on
Maybe a big turbo
RE: Blaze D-Turbo, Soon to be phase 1. - Pugmarshall - 29-01-2014
Hi sir Mitchell, sell the Blaze if you don't want it. Don't break it sir hi. 'tis a nice one sir.
RE: Blaze D-Turbo, Soon to be phase 1. - Chris_90 - 29-01-2014
Swap it for my 106?
RE: Blaze D-Turbo, Soon to be phase 1. - Mitch - 29-01-2014
(29-01-2014, 02:11 PM)ozonehostile Wrote: f*ck off breaking everything!
Your blaze is genuinely one of the tidiest examples I've seen. Phase 1 it and crack on
Maybe a big turbo
Thank you zakk, but im losing interest, really dont know what to do with it :/
(29-01-2014, 08:35 PM)Chris_90 Wrote: Swap it for my 106?
I have a 106 nad, i dont need another
RE: Blaze D-Turbo, Soon to be phase 1. - Mitch - 23-03-2014
not done much lately, has been of the road due to getting a 206 hdi as a daily which ive had JP remap, 134bhp/240ftlbs, highly recommend him. decided to get the fmic piped up yesterday
[attachment=14551]
re-routed the air filter
[attachment=14552]
[attachment=14553]
Not to happy with the outlet pipe as its tight against the pump and the bonnet, need some more silicones, piped it all up and then realized i had no where for the boost comp and gauge, so just removed the lda spring for now so it's constantly fully dropped, going to tap the manifold soon.
RE: Blaze D-Turbo, Soon to be phase 1. - Danny2009 - 23-03-2014
Nice to see your still cracking on with it Definitely get that ph1 front end on
RE: Blaze D-Turbo, fmic on! - Mitch - 23-03-2014
(23-03-2014, 11:41 AM)Danny2009 Wrote: Nice to see your still cracking on with it Definitely get that ph1 front end on
it now has a ph3 front bumper, though i still have a ph1 front end and the facilities at work to paint it blaze, so it may happen one day
RE: Blaze D-Turbo, fmic on! - mcglynn - 23-03-2014
Just had a read through this, looks lovely & a clean example!
RE: Blaze D-Turbo, fmic on! - Matt - 23-03-2014
Make it ph1 already!!
RE: Blaze D-Turbo, fmic on! - 7057sam - 23-03-2014
Looking awesome
be rude not to ph1 front end it
RE: Blaze D-Turbo, fmic on! - Mitch - 05-05-2014
Im pretty sh*t at updating this as you can tell, but gov modded it today, made such a difference, pretty happy with it
[attachment=15999]
bit of instagraming
[attachment=16000]
few things to do, fit a shiny rocker cover this week and new gasket as its leaked for the past 3 years now,fit inline fuel filter, fit 45 degree silicone to replace the horrible black one thats on the outlet piping by the pump, tap manifold for boost gauge/lda as there is none at the moment, tidy up mbc piping and all wiring, then should be all good for fcs.
some more instagramming
[attachment=16003]
RE: Mitch's Blaze D-Turbo - ozonehostile - 05-05-2014
Ah Mitch, very splendid indeed
RE: Mitch's Blaze D-Turbo - Mitch - 11-05-2014
Got a new exhaust, 2.5" stainless systems to a single box, as the straight through i had was getting a bit on the loud side for me, also got a new rear bumper due to a discovery rolling into the back of me.. luckily only cracked the bumper, the new bumper isnt colour coded but i think it suits the car more? exhaust sounds much better too, nice deep tone, also need to tap the manifold, currently have the mbc, boost gauge and lda all running off the wastegate signal line, it works but isnt really ideal...
[attachment=16150]
RE: Mitch's Blaze D-Turbo - mcglynn - 11-05-2014
vids or gtfo
Looks well though
RE: Mitch's Blaze D-Turbo - Mitch - 11-05-2014
(11-05-2014, 09:35 PM)mcglynn Wrote: vids or gtfo
have vids of the old one but nothing of the new, may get around to getting one next week sometime
RE: Mitch's Blaze D-Turbo - mcglynn - 11-05-2014
Gooood man thats what I like to hear.
Quite prefer the note of mine with one box (mid box & 2.25" homemade). Straight pipe was tiresome after a while.
RE: Mitch's Blaze D-Turbo - Mitch - 11-05-2014
(11-05-2014, 09:48 PM)mcglynn Wrote: Gooood man thats what I like to hear.
Quite prefer the note of mine with one box (mid box & 2.25" homemade). Straight pipe was tiresome after a while.
same here, i liked the straight through at first, but got fed up of it now, much prefer the sound with one box in
RE: Mitch's Blaze D-Turbo - Dum-Dum - 12-05-2014
Looking good mate.
RE: Mitch's Blaze D-Turbo - D Turbo Lyle - 12-05-2014
loooooking very niice mitch... im jealous!! I need to crack on with mine engine wise! This week is the week tho 8D and damm that pic of the blaze with the ph1 front end and banded steel is f*****g FTW!! I WANT IT! btw I updated my blaze project just all the new stuffs at the end of the project don't know how! haha
Mitch's Blaze D-Turbo - Mitch - 12-05-2014
Cheers dum, get cracking lyle
My current mess
[attachment=16165]
RE: Mitch's Blaze D-Turbo - Danny Wideboy - 12-05-2014
Gotta love a lash up!
RE: Mitch's Blaze D-Turbo - Dum-Dum - 12-05-2014
Lash up FTW.
RE: Mitch's Blaze D-Turbo - padge - 12-05-2014
such bodge.
Mitch's Blaze D-Turbo - Mitch - 12-05-2014
Definitely, shall tap the manifold for a feed for the gauge and one for the lda this weekend, also will get rid of metal tmic servo vac line and replace it with some rubber piping
RE: Mitch's Blaze D-Turbo - mcglynn - 12-05-2014
Where do you get those nipples bud? They seem perfect for takeoffs etc, I had to use a brake bleed nipple.