![]() |
Breaking: phase 3 silver hdi **UPDATED** - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26) +--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25) +--- Thread: Breaking: phase 3 silver hdi **UPDATED** (/showthread.php?tid=7457) |
RE: Breaking: phase 3 silver hdi - Kezzieboy - 10-11-2012 It'd all fit mine then...how much do you want? Roofliner, grab handles, sunvisors, map light bit and any other grey trim that's kicking about up there. RE: Breaking: phase 3 silver hdi - spike2002 - 10-11-2012 You have pm ![]() Breaking: phase 3 silver hdi - ash240970 - 10-11-2012 Weathers looking ok for tomoz - what time ya starting? RE: Breaking: phase 3 silver hdi - spike2002 - 11-11-2012 Around 10.30 mate. yh should be nice gota few things to do to the 6 aswell ![]() RE: Breaking: phase 3 silver hdi - Daniel306 - 11-11-2012 What are the wings like? can you post them? also intrested in the ABC trims RE: Breaking: phase 3 silver hdi - spike2002 - 11-11-2012 Pass wing is not very good at all. drivers is good condition iirc and abc pillers are missing the cap buts off b pillers i can post the wing and abc if need be would have to get a price ![]() RE: Breaking: phase 3 silver hdi - Daniel306 - 11-11-2012 Its just the C pilers im needing really, whats not good about the other wing, paint and small dents is not a problem if it fits correctly and is not rusty RE: Breaking: phase 3 silver hdi - spike2002 - 11-11-2012 It has paint peel mate will check them for dents exc and let you know. do you want the wings to respray then? I don't mind splitting the c trims if that's all you need ![]() RE: Breaking: phase 3 silver hdi - v6kickass - 13-11-2012 What miles is the engine on? How much for the injectors? RE: Breaking: phase 3 silver hdi - puglove - 13-11-2012 I could do with the whole bloody shell lol RE: Breaking: phase 3 silver hdi - spike2002 - 13-11-2012 It is over 200k but is a very good runner starts first time before the battery went as I didn't start it for over a week. Injectors £60 for the set of 4 ![]() (13-11-2012, 07:48 PM)puglove Wrote: I could do with the whole bloody shell lol Is that for a full phase 3 conversion ![]() RE: Breaking: phase 3 silver hdi - Daniel306 - 13-11-2012 Whats the best price you can do the C pillars and wings for? could you post some photos of the wings? Breaking: phase 3 silver hdi - ash240970 - 14-11-2012 R45 probably has to go and find out how much a roll of bubble wrap will cost him before he quotes you postage on the wings lol RE: Breaking: phase 3 silver hdi - spike2002 - 14-11-2012 Lol yes shed loads of wrap and card board :p RE: Breaking: phase 3 silver hdi - Oil-burner - 15-11-2012 What's the damage on the front bumper mate? RE: Breaking: phase 3 silver hdi - spike2002 - 15-11-2012 2 splits under the pass fog light that are held together with cable ties could be plastic welded up easily enuff ![]() RE: Breaking: phase 3 silver hdi - Oil-burner - 15-11-2012 You got any pics? RE: Breaking: phase 3 silver hdi - spike2002 - 15-11-2012 Not at the mo mate can get some for you tho. Will try get some before the wkend if not it will be sat all depends how dark it is when I get home from work ![]() RE: Breaking: phase 3 silver hdi - Oil-burner - 15-11-2012 Haha yeah fair doo's mate no rush! Breaking: phase 3 silver hdi - ash240970 - 15-11-2012 Ain't you got a flash on that I phone 4 then? RE: Breaking: phase 3 silver hdi - puglove - 15-11-2012 (13-11-2012, 07:56 PM)R45_ODV Wrote: It is over 200k but is a very good runner starts first time before the battery went as I didn't start it for over a week. No its for a every removable panel i have is battered convesion. Early ph2 ftw on my DT wouldnt have it ph3 ![]() RE: Breaking: phase 3 silver hdi - spike2002 - 15-11-2012 (15-11-2012, 03:08 AM)ash240970 Wrote: Ain't you got a flash on that I phone 4 then? Yes mate but most likely the pics will come out shit as its pitch black were the car is :p No its for a every removable panel i have is battered convesion. Early ph2 ftw on my DT wouldnt have it ph3 ![]() [/quote] Tailgate I'm keeping bonnet has gone still have all 4 doors at the mo if you are interested can do them with glass and elec front and rear motors and the rear elec conversion ![]() RE: Breaking: phase 3 silver hdi - puglove - 15-11-2012 Iv been looking around and seen a few cheap GLX Phase2s so i think im just going to buy one a ra*e it of parts as i do desperately need a bonnet and boot aswell as doors wings and bumpers lol. RE: Breaking: phase 3 silver hdi - spike2002 - 15-11-2012 Shame I sold the bonnet mate or you could of had the car off me for not much more than I paid for it still has 9 months mot on it lol RE: Breaking: phase 3 silver hdi - devils_fuel - 16-11-2012 how far are you from bristol? I could do with doors and other things ![]() RE: Breaking: phase 3 silver hdi - spike2002 - 16-11-2012 Not to far mate about a hours drive Breaking: phase 3 silver hdi - ash240970 - 16-11-2012 Yep, I'll agree with that but factor in some traffic RE: Breaking: phase 3 silver hdi - spike2002 - 21-11-2012 Anymore for anymore ![]() RE: Breaking: phase 3 silver hdi - spike2002 - 25-11-2012 Open to offers on all parts inc engine bare or complete need the room so I can sort the garage out ![]() Breaking: phase 3 silver hdi - ash240970 - 25-11-2012 When we going choppy choppy on the gti? |