306oc - Peugeot 306 Owners Club & Forum
Ph1 White GTi6 - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Ph1 White GTi6 (/showthread.php?tid=31961)

Pages: 1 2 3

RE: Ph1 White GTi6 - Nathan1305 - 22-09-2015

(22-09-2015, 01:26 PM)welshpug Wrote: brass takeoff should have a plastic small bore pipe running back to the vacuum pump.

It does, I just removed it to access the ICV easier

RE: Ph1 White GTi6 - Stef205 - 22-09-2015

(21-09-2015, 10:57 PM)Nathan1305 Wrote: Spoiler will be going Smile probably put a GTi one on, it's on coilovers so could adjust if needed and hoping to get a beam built up soon. Need to source an interior for it. Seats, roof liner and all the rear plastics

Got a newly built axle here with 21mm bars it's clearly got your name all over it Wink

RE: Ph1 White GTi6 - Nathan1305 - 22-09-2015

(22-09-2015, 03:33 PM)Stef205 Wrote:
(21-09-2015, 10:57 PM)Nathan1305 Wrote: Spoiler will be going Smile probably put a GTi one on, it's on coilovers so could adjust if needed and hoping to get a beam built up soon. Need to source an interior for it. Seats, roof liner and all the rear plastics

Got a newly built axle here with 21mm bars it's clearly got your name all over it Wink

So much want! Would need the 106 beam to sell or P/X Sad

RE: Ph1 White GTi6 - ozonehostile - 22-09-2015

I've got that breather hose if you want it dude, yours for the cost of postage

RE: Ph1 White GTi6 - Nathan1305 - 22-09-2015

(22-09-2015, 05:34 PM)ozonehostile Wrote: I've got that breather hose if you want it dude, yours for the cost of postage

Awesome I'll give you a message Friday Smile

RE: Ph1 White GTi6 - Stef205 - 22-09-2015

(22-09-2015, 05:31 PM)Nathan1305 Wrote:
(22-09-2015, 03:33 PM)Stef205 Wrote:
(21-09-2015, 10:57 PM)Nathan1305 Wrote: Spoiler will be going Smile probably put a GTi one on, it's on coilovers so could adjust if needed and hoping to get a beam built up soon. Need to source an interior for it. Seats, roof liner and all the rear plastics

Got a newly built axle here with 21mm bars it's clearly got your name all over it Wink

So much want! Would need the 106 beam to sell or P/X Sad

best get it sold then Wink

RE: Ph1 White GTi6 - Nathan1305 - 25-09-2015

Got a bit bored today so started to underseal the arches today Smile it has rear arch liners but wanted to preserve it the best I can. Luckily it has no arch rust what so ever!

   
   
   

RE: Ph1 White GTi6 - Matt-Rallye - 26-09-2015

Nice bit of preservation happening there Smile keep it up!

RE: Ph1 White GTi6 - RetroPug - 26-09-2015

I need to do my arches as well.
It's on the winter list I think!

RE: Ph1 White GTi6 - 7057sam - 26-09-2015

Nice one mate

Them ta/racelands coilovers make me shudder just thinking about them lol

RE: Ph1 White GTi6 - ozonehostile - 26-09-2015

(26-09-2015, 03:51 PM)7057sam Wrote: Nice one mate

Them ta/racelands coilovers make me shudder just thinking about them lol

I was thinking the same :p hateful things lol

RE: Ph1 White GTi6 - Nathan1305 - 26-09-2015

(26-09-2015, 03:51 PM)7057sam Wrote: Nice one mate

Them ta/racelands coilovers make me shudder just thinking about them lol

Haha they are actually less harsh than my Avo coilovers on my DT what's bad about them?
(26-09-2015, 09:57 AM)Matt-Rallye Wrote: Nice bit of preservation happening there Smile keep it up!

Thanks mate Smile hope it stops anything getting to bad

RE: Ph1 White GTi6 - Poodle - 27-09-2015

Might want to adjust your avos then lol, mine have always been super smooth compared to the TAs. TAs are just for people who want to be able to drop a car on it's arse for cheaps, ride quality, handling and build quality seem to just be well below par. But then they are really cheap. lol If you like them, keep them.

RE: Ph1 White GTi6 - Piggy - 27-09-2015

I rekon standars gti/vts dampers and springs would handle better than TA/raceland tbh!

RE: Ph1 White GTi6 - welshpug - 27-09-2015

avo arent the best either tbh! made tgeir rep on good service, because they break and leak all the time!

RE: Ph1 White GTi6 - RetroPug - 27-09-2015

(27-09-2015, 08:44 AM)Piggy Wrote: I rekon standars gti/vts dampers and springs would handle better than TA/raceland tbh!

Standard will handle better than virtually all "slammed" setups.

RE: Ph1 White GTi6 - Toms306 - 27-09-2015

Standard new will...

Standard 15 year old, not so much. lol

RE: Ph1 White GTi6 - Poodle - 27-09-2015

(27-09-2015, 08:46 AM)welshpug Wrote: avo arent the best either tbh! made tgeir rep on good service, because they break and leak all the time!

I can believe that, their service is awesome, but i popped one the first time the car went airborne lol. They repaired it free of charge, so can't complain on that front, but that doesn't change the fact it happened in the first place. I guess they're still a budget offering tbf.

RE: Ph1 White GTi6 - ozonehostile - 27-09-2015

I've never liked coilovers on a Peugeot tbh, don't suit their driving character imo. Bilstein and decent springs for me every time Smile

RE: Ph1 White GTi6 - Matt - 27-09-2015

Reminded me I need to do my arches. Realised today I have a little rust there Sad

RE: Ph1 White GTi6 - Jonny81191 - 28-09-2015

(27-09-2015, 08:31 PM)ozonehostile Wrote: I've never liked coilovers on a Peugeot tbh, don't suit their driving character imo. Bilstein and decent springs for me every time Smile

I did like my d2's, my estate was on rails with them and 23mm rear TB's. I prefer my B8's and H&R 40mm's though..

RE: Ph1 White GTi6 - welshpug - 28-09-2015

(27-09-2015, 10:17 PM)Matt Wrote: Reminded me I need to do my arches. Realised today I have a little rust there Sad

if you have a white car, dont do them black...

RE: Ph1 White GTi6 - Matt-Rallye - 28-09-2015

(28-09-2015, 07:11 AM)welshpug Wrote:
(27-09-2015, 10:17 PM)Matt Wrote: Reminded me I need to do my arches. Realised today I have a little rust there Sad

if you have a white car, dont do them black...

This. Just remove the rust, repaint in white hammerite then clear underseal. looks so much fresher!

RE: Ph1 White GTi6 - Matt - 28-09-2015

They do a clear underseal?! Mind blown!

RE: Ph1 White GTi6 - Matt-Rallye - 28-09-2015

Yep! Clear waxoyl is the one you want Smile

RE: Ph1 White GTi6 - cully - 28-09-2015

Dont put stone chip Tetrosyl on top of hamerite
as it will react and strip the lot back to bare metal!!
BE WARNED IVE DONE IT

do a test sample first

   

RE: Ph1 White GTi6 - Matt-Rallye - 28-09-2015

Clear waxoyl and hammerite go together fine, All the rallying boys do it so the undersides look clean for scrutineering. Smile

RE: Ph1 White GTi6 - Matt - 06-10-2015

Any updates?

RE: Ph1 White GTi6 - RetroPug - 07-10-2015

(27-09-2015, 11:39 AM)Toms306 Wrote: Standard new will...

Standard 15 year old, not so much. lol

I bet standard 15 year old would handle better than the cheapest coilovers set to the absolute lowest ride height with no other bushes etc. changed.

RE: Ph1 White GTi6 - Dum-Dum - 08-10-2015

Can't believe that has coilover thread left.



Anyway I'll just leave this here.