+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: General (https://www.306oc.co.uk/forum/forumdisplay.php?fid=6)
+--- Forum: The Couch (https://www.306oc.co.uk/forum/forumdisplay.php?fid=7)
+--- Thread: what did you do at work today? (/showthread.php?tid=28109)
RE: what did you do at work today? - Kezzieboy - 04-12-2014
(04-12-2014, 08:10 AM)Anton Wrote:(03-12-2014, 11:16 PM)Kezzieboy Wrote: Are you a gymnast anton?!
I did a cfd analysis of a windscreen defrosting.
Erm no lol, can coach lots of things but that's what I do on a Monday and Wednesday. Normally teaching swimming.
Ahh, thought I'd found a fellow gymnast for a second there :-P what age/level do you coach?
RE: what did you do at work today? - Anton - 04-12-2014
(04-12-2014, 11:00 AM)Kezzieboy Wrote:(04-12-2014, 08:10 AM)Anton Wrote:(03-12-2014, 11:16 PM)Kezzieboy Wrote: Are you a gymnast anton?!
I did a cfd analysis of a windscreen defrosting.
Erm no lol, can coach lots of things but that's what I do on a Monday and Wednesday. Normally teaching swimming.
Ahh, thought I'd found a fellow gymnast for a second there :-P what age/level do you coach?
I'm ok, i have to be able to do a fair amount in order to coach it. I did quite a bit of adult gym at uni. But when/if you see me you'll understand i'm not a natural gymnast haha.
I teach from walking/18 months to end of high school age, about 15-16 normally. So a very big varied range. BG coach and award system, GG, Artistic and Trampolining.
What do you do?
RE: what did you do at work today? - Kezzieboy - 04-12-2014
Sweet! I've only been doing it since I started uni, so 3 and a bit years. Artistic, almost entirely floor for me, with a little bit of tramp and an occasional go on some apparatus.
what did you do at work today? - Razorback_Rob - 04-12-2014
Drove a van around for a bit. Then had ozone drive (hoon) another van around roundabouts in Ledbury, killing time and getting paid. Iveco Dailys really aren't made for hooning.
RE: what did you do at work today? - Piggy - 04-12-2014
playing with chainsaws and ride on mowers...
RE: what did you do at work today? - silverzx - 04-12-2014
Bored bloody sh1tless here.
RE: what did you do at work today? - Midnightclub - 04-12-2014
(04-12-2014, 04:13 PM)silverzx Wrote: Bored bloody sh1tless here.
+1
RE: what did you do at work today? - silverzx - 04-12-2014
No bargains around atm...
RE: what did you do at work today? - Ruan - 04-12-2014
- Did daily checks, someone's doing something nasty to a machine, attempt to figure out WTF they've done and why it keeps crashing.
- Installed Windows Server 2012 on a VM - reminded myself how f*cking atrocious it is.
- Played with IdM/FreeIPA.
- Got annoyed with Sun Grid Engine's qconf tool - if you're interested why, have a read of the manpage and I'm sure you'll see why - http://gridscheduler.sourceforge.net/htmlman/htmlman1/qconf.html
- Waited for some shit to compile (lots of this)
RE: what did you do at work today? - 306carter - 04-12-2014
Finished a small access control system in Leeds.
![[Image: 20140916_105400_zpstedz7pmh.jpg]](http://s161.photobucket.com/user/cartert03/media/Mobile%20Uploads/20140916_105400_zpstedz7pmh.jpg.html)
RE: what did you do at work today? - Niall - 04-12-2014
Oh Pac stuff. Lovely kit
Well, after spending 3 hours in kwikfit wanting a puncture repaired and coming out with 2 new tyres, i had 2 calls including one which I've very recently done a panel change on which always worries me a bit as i always think shit, what have i missed.
So i got there, panel in fault and no power light on, emergency lights on, lift not working, computers, tvs not working...SSE outside at a big hole in the road looking rather confused and worried....
"Sir, you've had a power cut"
"Well why is you're f*cking alarm broken then?!"
Err i wonder......
And a pic of the install seeing as Carter has started something off here
[attachment=20463]
RE: what did you do at work today? - 306carter - 04-12-2014
PAC wasn't installed on our recommendation. I hate the kit plus it looks looks awful. But does a job.
RE: what did you do at work today? - Niall - 04-12-2014
The only thing i do like that PAC have done is the watch link access fobs. Quite neat that you don't need a fob or card on you. Can just touch your watch on the reader but i think a few others have done this now as well (Paxton?)
RE: what did you do at work today? - 306carter - 04-12-2014
(04-12-2014, 06:41 PM)Niall Wrote: The only thing i do like that PAC have done is the watch link access fobs. Quite neat that you don't need a fob or card on you. Can just touch your watch on the reader but i think a few others have done this now as well (Paxton?)
I've not seen that before. But most readers now are multi - class and will read almost anything. Unlike the older 1 prox readers. You can use contact less bank cards on most systems now.
Paxton is nearly as poor as PAC my boss calls it the Lada of access control. We rarely use it.
what did you do at work today? - j-n-88 - 04-12-2014
Again today I didn't do much!
RE: what did you do at work today? - blaze_the_6 - 04-12-2014
I did manual shovel in hand type stuff. Plus I mingle with the customers, making myself sound intellectual :O
RE: what did you do at work today? - Jonny81191 - 04-12-2014
Had a day like this, only rust instead of skittles..
RE: what did you do at work today? - THE_Liam - 04-12-2014
(03-12-2014, 11:22 PM)JJ0063 Wrote: Spreadsheets, reports, call listening, research. Had a busy day
Call centre fwends!
I spent all morning preparing a disciplinary hearing pack for someone I was going to sack, who then resigned right at the start of the hearing, so that was a waste of time. Then I listened to 11 calls and despaired at the massive job I have ahead of me to get my new team to perform. Then gave a briefing to 2 teams who did nothing but bitch and moan. But then I finished and went to the pub, and I guy off my old team who'd just got a secondment in the same role as me bought me a few beers for helping him get it, and that made it all worthwhile
RE: what did you do at work today? - Pete - 04-12-2014
Snagged off 25 wards worth of extra's at LGI, then Drove to Bradford finished a job off. Steady half days work tomo prepping/repainting 8 door sides on a side job.
RE: what did you do at work today? - ConorTRG - 05-12-2014
Front Pads and disk skim, rear pads, droplink, fuel filter + oil change on a b6 passat.
RE: what did you do at work today? - Paul_13 - 05-12-2014
Up at 4am to drive to Beckton.... But....
IT'S FRIDAY!
we're part timers in the construction industry, half day today!
RE: what did you do at work today? - Niall - 05-12-2014
(05-12-2014, 04:41 AM)Paul_13 Wrote: we're part timers in the construction industry, half day today!
Part timers? That's generous for a plumber
RE: what did you do at work today? - Paul_13 - 05-12-2014
Oi! I'm a pipefitter have you know
RE: what did you do at work today? - PocketFighter - 05-12-2014
literally nothing ... scratched my gonads, answered a few calls, yawned a little, doss day
RE: what did you do at work today? - Eeyore - 05-12-2014
Took the day off and went and spunked money on a new speedboat. Then drove it straight from the seller to the river and took it for a spin!
RE: what did you do at work today? - ginge191 - 05-12-2014
Gave a lecture at Southampton University ... then came back to see the state of which my supply teacher had left my classroom in
RE: what did you do at work today? - 306Dan - 05-12-2014
prepped a few karts for the weekend, then a old customer came in with a twisted kart
RE: what did you do at work today? - cully - 05-12-2014
released a group of ladies stuck in a lift
RE: what did you do at work today? - Uberderv - 05-12-2014
Changed a Vacuum pump on a co reduction furnace , fixed a noisy isle master FLT, some welding and pissed about on a cherry picker. Then at about 12:30 had a 'Big Texan' (2 burgers,bacon,egg,cheese+onion) burger and couldn't do much else after. Luckily i finished at 2 anyway
RE: what did you do at work today? - WiNgNuTz - 05-12-2014
Sliced my knuckle open when I slipped with my stanley knife. Cue a 2 hour wait at A&E for a cleanup and 2 stitches.
