306oc - Peugeot 306 Owners Club & Forum
Ell Diablo - Hydraulic Clutch In - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Ell Diablo - Hydraulic Clutch In (/showthread.php?tid=9159)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30


Ell Diablo - ginge191 - 20-08-2013

205 next to GTI. Lets go?


RE: Ell Diablo - Midnightclub - 20-08-2013

Do it for pinks /fastandthefurious


RE: Ell Diablo - Niall - 20-08-2013

(20-08-2013, 05:42 PM)ginge191 Wrote: 205 next to GTI. Lets go?

lmao

Haha oh Ginge you do make my sides hurt. I wont be entertaining that because i don't condone street racing, i don't have something to prove unlike your self and the car is going off the road soon.


Re: Ell Diablo - floz123 - 20-08-2013

Next to Capri....Wink


RE: Ell Diablo - Niall - 20-08-2013

(20-08-2013, 05:51 PM)floz123 Wrote: Next to Capri....Wink

What you mean your actually going to take it out the garage? Wink
I wouldnt when it looks that mint!

By the way, still laughing and wiping the tears from my eyes. Repped ginge for making my evening!


Re: Ell Diablo - floz123 - 20-08-2013

Yeah good point Nial. Dodgy okay scrap that idea! Lol.


RE: Ell Diablo - ginge191 - 20-08-2013

(20-08-2013, 05:52 PM)Niall Wrote:
(20-08-2013, 05:51 PM)floz123 Wrote: Next to Capri....Wink

What you mean your actually going to take it out the garage? Wink
I wouldnt when it looks that mint!

By the way, still laughing and wiping the tears from my eyes. Repped ginge for making my evening!

I know your plans... THAT makes my evening.


RE: Ell Diablo - Niall - 20-08-2013

Oh yeah of course, i forgot you were the fountain of knowledge! If you know, tell us then! Because trust me, you dont know half as much as you think you do.


RE: Ell Diablo - Grant - 20-08-2013

Aaaannnyyyyywwwwaaaaayyyyyy.

Finally fixed the poxy gearbox oil leak. No surprise it was leaking...

No prizes for spotting the problem

[Image: image_zps372b4faa.jpg]


RE: Ell Diablo - ginge191 - 20-08-2013

(20-08-2013, 08:35 PM)Niall Wrote: Oh yeah of course, i forgot you were the fountain of knowledge! If you know, tell us then! Because trust me, you dont know half as much as you think you do.

Supercharger +


RE: Ell Diablo - Niall - 20-08-2013

Wrong.


RE: Ell Diablo - Grant - 20-08-2013

[Image: h965E7390]


RE: Ell Diablo - Ed Doe - 20-08-2013

Exactly. Take it to the pms you pair of divas! Tongue


RE: Ell Diablo - Niall - 20-08-2013

nahhh cba with that. People cant see how desperate ginge gets in an argument then Tongue


RE: Ell Diablo - ginge191 - 20-08-2013

Come on Niall, pm me ThumbsUp


Anywho, thread, what other sneaky mods you got planned? Seriously loving the becauseracecar switches! Smile


RE: Ell Diablo - Grant - 20-08-2013

Cheers dude Smile

They wouldn't be too sneaky if I were to announce them before I did them Wink


RE: Ell Diablo - Grant - 22-08-2013

So plan is to underseal the fecker tonight. Que the rant later on lol


Re: Ell Diablo - floz123 - 22-08-2013

Make sure you wear a full body suit! If not...PLEASE post a picture of yourself after Wink


RE: Ell Diablo - Piggy - 22-08-2013

good steady progress chap


RE: Ell Diablo - Grant - 22-08-2013

(22-08-2013, 02:18 PM)floz123 Wrote: Make sure you wear a full body suit! If not...PLEASE post a picture of yourself after Wink

Haha yeah, got a boiler suit here. Not risking that one!


(22-08-2013, 02:28 PM)Piggy Wrote: good steady progress chap

Cheers mate. Getting there. Slowly but surely.


RE: Ell Diablo - samass - 22-08-2013

And a hat, you'll need a hat.


RE: Ell Diablo - Grant - 22-08-2013

You sir owe me one Hat!


Anyhow, some progress tonight. Got under the car and started scrubbing up ready to undersell. Got a little carried away and want on a rust spotting vendetta:

Whipped off the wheels and rear bumper and was faced with this:

[Image: image_zps79efac58.jpg]

[Image: image_zpsa5d9983e.jpg]

[Image: image_zps526192cd.jpg]

A bit of elbow grease later:

[Image: image_zpsa469266f.jpg]


[Image: image_zpsb2d834b3.jpg]

No - no more black crap will come off. Ive been under there with wire wool and everything. It wont budge, shy of taking paint off.

Removed the harness bar plates and cleaned them up as they were under there untreated:

[Image: image_zps8a088281.jpg]

Gave them a lick of paint

[Image: image_zps70510edd.jpg]

Got round to the front of the car and started attacking the chassis legs where they meet the slam panel:

[Image: image_zpsf6836589.jpg]

A few spots of surface rust so got it all wire wheeled back down and painted up:

[Image: image_zps40e21790.jpg]

[Image: image_zps2fe7ccc0.jpg]

Also attacked where the boot stops rest. A seam there where I've seen a few cars start to rust:

[Image: image_zpsd968a106.jpg]

[Image: image_zps4f574d11.jpg]

[Image: image_zps867412f4.jpg]

And then made up a distribution plate for my battery to allow more thread into the terminal, as I was a bit worried about it holding fine:

[Image: image_zps8976f626.jpg]

So all in all, I have yet to do any under sealing lol. About to go and make a start (read mess) now Smile


RE: Ell Diablo - Grant - 22-08-2013

One side done! Excuse the crappy phone pictures

[Image: image_zpsdf7e90e5.jpg]


Completely underestimated this job

Dodgy


Re: Ell Diablo - floz123 - 22-08-2013

Nice one mate. Looks like its coming along well Smile


RE: Ell Diablo - Grant - 22-08-2013

Cheers dude. Been making some good headway the last couple of weeks. Using up everything i have stockpiled that I never find time to fit.

Still gotta grind some rust out of the front and underseal there Dodgy

Also some surface rust on the lower panel where the rad sits that needs addressing Doh


RE: Ell Diablo - Curt - 22-08-2013

Good stuff mate, like the attention to detail/thoroughness Smile.

Under sealing is one job I'm not looking forward to on the Mazda Sad


RE: Ell Diablo - Grant - 22-08-2013

(22-08-2013, 09:24 PM)Curt Wrote: Good stuff mate, like the attention to detail/thoroughness Smile.

Under sealing is one job I'm not looking forward to on the Mazda Sad

Cheers mate Smile

Give a shout if you want a hand Smile Just provide bacon/sausage sanis Wink


RE: Ell Diablo - samass - 22-08-2013

it's shit isn't it.

this is what i do at work. on shitty land rovers all covered in sheep shite.

but not with a rush, with a spray gun, so it goes f*cking EVERYWHERE

i refuse to underseal the nad, it can rot. i'd rather reweld than f*cking underseal.


RE: Ell Diablo - Scott - 22-08-2013

(22-08-2013, 09:24 PM)Curt Wrote: Good stuff mate, like the attention to detail/thoroughness Smile.
Agreed! It's good to see so much time spent on it and getting things done!


RE: Ell Diablo - Grant - 22-08-2013

(22-08-2013, 09:27 PM)samass Wrote: it's shit isn't it.

this is what i do at work. on shitty land rovers all covered in sheep shite.

but not with a rush, with a spray gun, so it goes f*cking EVERYWHERE

i refuse to underseal the nad, it can rot. i'd rather reweld than f*cking underseal.

f*ck that for a laugh. Its bad enough doing my car with a brush.


(22-08-2013, 09:30 PM)Scott Wrote:
(22-08-2013, 09:24 PM)Curt Wrote: Good stuff mate, like the attention to detail/thoroughness Smile.
Agreed! It's good to see so much time spent on it and getting things done!

Cheers dude. The list of things to do is getting slowly smaller though Sad don't know what I'm gonna do with myself
Huh