OK so I'm off again just after redoing my shead so now all work can be done there rather than staying late at work lol any way allways wanted to do the hole twin turbo gearbox mounted turbos ever since the first thread just didn't have time to do it right so Hope fully this time :-) so the engine is getting sent away to get sand blasted and power coated Candy blue hopeing to have that done by this weekend then i can start putting new part's on all Bean we'll .have got one turbo already a gt2056 so need to find a another one if any one has any idears:-) so that's were im at nw show is about 9 weeks away so hope fully it's ready will keep use up dated :-)[
attachment=27270][
attachment=27271][
attachment=27272][
attachment=27273][
attachment=27274]
Always a smile to see your projects...
Have to ask though...what you doing about rods not blasting out the nice candy blue block or the head going north?!
(20-04-2016, 06:02 AM)Piggy Wrote: [ -> ]Always a smile to see your projects...
Have to ask though...what you doing about rods not blasting out the nice candy blue block or the head going north?!
Thanks piggy
The plan is to just go easy on the right foot lol forged rods is the only thing I can't a ford at the min that block has got hdi rods dow so they might do till after show season I'm looking out for a cheap set of apr stud's :-)
(20-04-2016, 07:58 AM)welshpug Wrote: [ -> ]whats the white stuff?
Silicone lol and a steel plate between the head lol
Just fitted this now so hopefully all tight now so no sand can get in :-)[
attachment=27293][
attachment=27292]
Also loving this sun lol[
attachment=27294]
good luck man. the gt2056s will blow a hole in a standard block let alone twin turbos. So crack on i say.
Also is that a 16 valver i see in the background of the first picture
(20-04-2016, 07:17 PM)bashbarnard Wrote: [ -> ]good luck man. the gt2056s will blow a hole in a standard block let alone twin turbos. So crack on i say.
Also is that a 16 valver i see in the background of the first picture
Yep lol it is project for another 306 if I can find one clean anuf and cheap . ye ur right about the turbo but a well lol its all fun and games :-)
I love your ideas...
But whats the point if you need to go easy on the right foot?
I'd rather standard blower than I can use everywhere than something I have to be super careful with. Just.my 2p
(20-04-2016, 09:03 PM)Piggy Wrote: [ -> ]I love your ideas...
But whats the point if you need to go easy on the right foot?
I'd rather standard blower than I can use everywhere than something I have to be super careful with. Just.my 2p
Ye no wat ur saying like BT super careful till I get rods sum way cheap :-) the hdi rods will do for now there good for 200bhp are they not . what are the gt2056 like. Much lag? :-)
Considered 16v hdi rods? Fair bit chunkier than the 8v ones.
GT2056 on its own should see you to 200bhp if fueled well.
Not that great for compound purposes but that all depends on how you going to do it and what to match it with
Lag on shifts is almost minimal, threshhold again is very small if fueled well
(21-04-2016, 09:58 AM)Piggy Wrote: [ -> ]Considered 16v hdi rods? Fair bit chunkier than the 8v ones.
GT2056 on its own should see you to 200bhp if fueled well.
Not that great for compound purposes but that all depends on how you going to do it and what to match it with
Lag on shifts is almost minimal, threshhold again is very small if fueled well
Had though about it ye BT didn't want to spilt up that other engine lol how mutch are forged rods now a days any way :-) how u coming on with ur project piggy lol
£400 for the ones doing the rounds
So this is were im at now any thoughts :-) I'm very happy with the out come .its a lot more matalicy my fone just can't pick it up lol
[
attachment=27447]
[
attachment=27449]
[
attachment=27448]
[
attachment=27450]
The final cost for this paint job £0.00 :-)
The advance of having a cousin that owns his own powed coating business lol
That looks bloody amazing
(30-04-2016, 05:00 AM)Piggy Wrote: [ -> ]That looks bloody amazing
Thanks piggy lol
That really does look good mate
Getting your heater plugs to work may need a bit of work tho? lol
(30-04-2016, 12:58 PM)Paul Baldwin Wrote: [ -> ]That really does look good mate Getting your heater plugs to work may need a bit of work tho? lol
Ye be getting new one's and different injectors them ones were just blanks :-) ye very happy with it bean prepping that engine for a 4 weeks soild for powder lol all worth it now
I haven't seen an engine this good since I left Morris Motors "Show Bay" yonks ago
(01-05-2016, 09:10 AM)Magenta Sunset Wrote: [ -> ]I haven't seen an engine this good since I left Morris Motors "Show Bay" yonks ago
Thanks :-)
that is one tasty motor!
Thanks very mutch hard work paying off slowly :-)
Does look ace bud... But two turbos and now a 12mm pump... Theres going to be a viewing hole on that block... Which be a ruddy shame
wow thats rediculous. cant wait to see it!
never seen such a blinging xud, top efforts there
Jesus that looks good.
You need to do something with the oil filter though!
Absolutely awesome although it's definitely going to shoot a rod as Piggy said lol.
(04-05-2016, 05:33 AM)Piggy Wrote: [ -> ]Does look ace bud... But two turbos and now a 12mm pump... Theres going to be a viewing hole on that block... Which be a ruddy shame
I'm on the look out for a set of forged BT seeing if I can get a 2nd hand set as money is low again lol wat do they fetch 2nd hand anybody know
(04-05-2016, 09:05 AM)Eeyore Wrote: [ -> ]wow thats rediculous. cant wait to see it!
Thanks Eeyore :-)
(04-05-2016, 10:51 AM)zx_volcane Wrote: [ -> ]never seen such a blinging xud, top efforts there
Thanks lol its is pretty shine just need to keep the oil away from in it now
(04-05-2016, 11:09 AM)JJ0063 Wrote: [ -> ]Jesus that looks good.
You need to do something with the oil filter though!
Absolutely awesome although it's definitely going to shoot a rod as Piggy said lol.
Thanks JJ ye have a new fillter just haven't put it in yet