chris_90 106 derv project xsi rep, turbo NAD ;)

[Chris_90]

So as few of may no, been putting the bosch on the 106 for the last 2 days got it all stripped down and pump on etc with in 3 hours! Thought it was all good took a while to start but thought it was good rebuilt it all took it for a spin and clouds and clouds of white smoke so 15/20 times of cambelt off and on couldn't get it right so gave up for Friday as was going to work.

Got jenks out this morning lend a hand after talking about it i had been timing it wrong i was working my 12 o'clock vertical off the floor instead of 12 o'clock off the pump so the timing was well out any way stripped all to bits again jenks timed it back u first time was very lumpy smokey, so moved it a tooth and sorted started first turn of key needs slight adjustment as there is still some white smoke under load but nothing to what it used to be like so, deiced to take it up and down road just to check make sure it was ok then this happened

http://youtu.be/odEzz9dibHU

Didnt even think about the bonnet not being clipped down! lucky just snapped the brackets and bent bonnet, no damage to rest of car thank f**k!

Anyway smoke wasnt that bad so built it all back up and went for a spin all seems good feels like it has abit more poke, as said before still slight white smoke on foot to floor pulls. So needs just a slight bit on pump but gonna see how i get on with it for now and do some more playing when my hands heal from all the chunks missing lol any way few pics





Did have some more pics but carnt be arsed with uploading them all.

Done for a while now with the car had so much stress with this never wanna touch a cambelt again lol

Just say a massive thanks to jenks to helping out/ getting it going TOP MAN!!