<![CDATA[306oc - Peugeot 306 Owners Club & Forum

<![CDATA[306oc - Peugeot 306 Owners Club & Forum - Parts]]> https://www.306oc.co.uk/forum/ Tue, 14 Apr 2026 21:47:54 +0000 MyBB <![CDATA[Fuel Filler neck pipe]]> https://www.306oc.co.uk/forum/showthread.php?tid=37848 Thu, 05 Aug 2021 19:30:28 +0100 Bigalham]]> https://www.306oc.co.uk/forum/showthread.php?tid=37848
The garage said they can get hold of the part and for us to source it.....hence me asking here...

I need to get some advice of the exact part and where to get one....

The garage suggested chekcing French sites.....?

Any ideas very welcome as this is our only form of transport atm.....

Thanks in advance]]>
The garage said they can get hold of the part and for us to source it.....hence me asking here...

I need to get some advice of the exact part and where to get one....

The garage suggested chekcing French sites.....?

Any ideas very welcome as this is our only form of transport atm.....

Thanks in advance]]> <![CDATA[Wiper motor for a 2000 306]]> https://www.306oc.co.uk/forum/showthread.php?tid=37835 Thu, 29 Jul 2021 18:36:41 +0100 jim15002]]> https://www.306oc.co.uk/forum/showthread.php?tid=37835 The wipers are no longer parking and he's been told that he'll need a new motor if anyone has a motor or knows where he could get one. Ebay wasn't showing any.

Many thanks.]]> The wipers are no longer parking and he's been told that he'll need a new motor if anyone has a motor or knows where he could get one. Ebay wasn't showing any.

Many thanks.]]> <![CDATA[FMIC]]> https://www.306oc.co.uk/forum/showthread.php?tid=37778 Sun, 25 Apr 2021 00:57:21 +0100 Bradley]]> https://www.306oc.co.uk/forum/showthread.php?tid=37778 <![CDATA[Xud forged rods]]> https://www.306oc.co.uk/forum/showthread.php?tid=37774 Sun, 18 Apr 2021 17:13:36 +0100 Xud Missile]]> https://www.306oc.co.uk/forum/showthread.php?tid=37774 Set of 4 forged rods still untouched and in original packaging. Bought through this forum a few years back. Paid 450 and would take 350 Inc postage for a quick sale. I'll take a photo or 2 and add them shortly

]]> Set of 4 forged rods still untouched and in original packaging. Bought through this forum a few years back. Paid 450 and would take 350 Inc postage for a quick sale. I'll take a photo or 2 and add them shortly

]]> <![CDATA[disc & ABS rear beam]]> https://www.306oc.co.uk/forum/showthread.php?tid=37746 Wed, 17 Feb 2021 18:00:30 +0000 ekjdm14]]> https://www.306oc.co.uk/forum/showthread.php?tid=37746
No guarantees on bearing health other than the car sat well & drove fine with no odd noises etc handling was as good as could be expected from a sunroof 5 door. Brakes worked fine although would benefit from pads at least in near future. Includes complete brake setup, handbrake cables, shocks etc. Asking £35 if anyone needs one majorly, otherwise will stack it in the garage with the rest of our spares stash.

Cheers, Dan & Emma]]>
No guarantees on bearing health other than the car sat well & drove fine with no odd noises etc handling was as good as could be expected from a sunroof 5 door. Brakes worked fine although would benefit from pads at least in near future. Includes complete brake setup, handbrake cables, shocks etc. Asking £35 if anyone needs one majorly, otherwise will stack it in the garage with the rest of our spares stash.

Cheers, Dan & Emma]]> <![CDATA[2002 206 1.4HDi 5 door EZA Mercury grey]]> https://www.306oc.co.uk/forum/showthread.php?tid=37735 Wed, 27 Jan 2021 19:48:31 +0000 ekjdm14]]> https://www.306oc.co.uk/forum/showthread.php?tid=37735
As per title, we've decided to break the grey 5 door now as we need the space & parts are easier to store than a whole car.

Shame really but there's lots of good parts available.

Rear beam, rebuilt in 2017 and plenty of grease in bearings, it's non-ABS drum brake & was lowered (about 40/50mm IIRC, it's low but not on the stops) with new shocks at the same time as the rebuild. (as it's only been together a few years, it wouldn't be horrendous to reset the ride height to standard if you so wished)

1.4 HDi 8HX engine & MA5 'box, mileage around 102k, this has covered about 2-3000 miles since we fitted a new Valeo clutch kit (clutch is still super light), new glow plugs, refurbished cylinder head (had a broken GP so had the head skimmed/tanked while it was apart, one cam lobe had what looked like pitting so replaced with the camshaft from a spare head), cambelt/water pump etc. There were a few other little bits done which I can't remember, crank pulley replaced about 5 years ago. Ran and drove great with no issues (have video of cold start available), turbo in good condition with no play or oil burning.

EZA Mercury grey panels (driver's wing/bonnet currently pending collection) in reasonable condition. Passenger wing (non sport) has a small ding near the headlamp but easily sorted by PDR, sport front bumper with fogs, non-sport rear bumper & doors all have age related marks but very presentable with colour coded door handles.

Black leather front sport seats (from a CC) & half black leather/grey suede rears. SP dash vents, leather steering wheel, CD head unit, instrument cluster with pink backlighting (shows 166k as was swapped from original cluster in 2016)

Brand new never fitted pair of driveshafts with ABS rings

Full MUX ECU/BSI/lock set with at least one remote key (might have another) and one non-remote.

That's just the best bits I can think of for the moment, most bits will be available though just PM or reply with what you need & will endeavour to get back to you ASAP. Cheers, Dan & Emma]]>
As per title, we've decided to break the grey 5 door now as we need the space & parts are easier to store than a whole car.

Shame really but there's lots of good parts available.

Rear beam, rebuilt in 2017 and plenty of grease in bearings, it's non-ABS drum brake & was lowered (about 40/50mm IIRC, it's low but not on the stops) with new shocks at the same time as the rebuild. (as it's only been together a few years, it wouldn't be horrendous to reset the ride height to standard if you so wished)

1.4 HDi 8HX engine & MA5 'box, mileage around 102k, this has covered about 2-3000 miles since we fitted a new Valeo clutch kit (clutch is still super light), new glow plugs, refurbished cylinder head (had a broken GP so had the head skimmed/tanked while it was apart, one cam lobe had what looked like pitting so replaced with the camshaft from a spare head), cambelt/water pump etc. There were a few other little bits done which I can't remember, crank pulley replaced about 5 years ago. Ran and drove great with no issues (have video of cold start available), turbo in good condition with no play or oil burning.

EZA Mercury grey panels (driver's wing/bonnet currently pending collection) in reasonable condition. Passenger wing (non sport) has a small ding near the headlamp but easily sorted by PDR, sport front bumper with fogs, non-sport rear bumper & doors all have age related marks but very presentable with colour coded door handles.

Black leather front sport seats (from a CC) & half black leather/grey suede rears. SP dash vents, leather steering wheel, CD head unit, instrument cluster with pink backlighting (shows 166k as was swapped from original cluster in 2016)

Brand new never fitted pair of driveshafts with ABS rings

Full MUX ECU/BSI/lock set with at least one remote key (might have another) and one non-remote.

That's just the best bits I can think of for the moment, most bits will be available though just PM or reply with what you need & will endeavour to get back to you ASAP. Cheers, Dan & Emma]]> <![CDATA[Remus Backbox]]> https://www.306oc.co.uk/forum/showthread.php?tid=37720 Sat, 16 Jan 2021 17:59:12 +0000 RetroPug]]> https://www.306oc.co.uk/forum/showthread.php?tid=37720 As in the title, remus backbox for sale, for a gti6 but probably would fit other 306s.

Not drony like a lot of systems on these cars can be, very raspy sound at full chat.

£75. Collection from Leicestershire or happy to post at cost.]]> As in the title, remus backbox for sale, for a gti6 but probably would fit other 306s.

Not drony like a lot of systems on these cars can be, very raspy sound at full chat.

£75. Collection from Leicestershire or happy to post at cost.]]> <![CDATA[Genuine Citroen ZX roof bars for sale]]> https://www.306oc.co.uk/forum/showthread.php?tid=37686 Wed, 11 Nov 2020 16:08:26 +0000 Zippy121]]> https://www.306oc.co.uk/forum/showthread.php?tid=37686 Bought for my ZX Volcane but never used
Would like £20 and can be collected from Derby DE74 area (near to East Midlands Airport) or I will post at cost to buyer.
PayPal accepted or cash on collection
WhatsApp 07957290223 for photos and more details etc]]> Bought for my ZX Volcane but never used
Would like £20 and can be collected from Derby DE74 area (near to East Midlands Airport) or I will post at cost to buyer.
PayPal accepted or cash on collection
WhatsApp 07957290223 for photos and more details etc]]> <![CDATA[*updated* Genuine Siemans VDO MAF]]> https://www.306oc.co.uk/forum/showthread.php?tid=37660 Sat, 19 Sep 2020 21:53:38 +0100 Midnightclub]]> https://www.306oc.co.uk/forum/showthread.php?tid=37660
- Genuine Sieman's/VDO MAF for a 306 HDi (may fit others), has less than 5k miles on it - £45 (£95 new)

Located in Taunton

MAF
[Image: mfnu2bS.jpg]

]]>
- Genuine Sieman's/VDO MAF for a 306 HDi (may fit others), has less than 5k miles on it - £45 (£95 new)

Located in Taunton

MAF
[Image: mfnu2bS.jpg]

]]> <![CDATA[Wanted car breaking for parts]]> https://www.306oc.co.uk/forum/showthread.php?tid=37657 Sun, 13 Sep 2020 13:25:18 +0100 Adamob200]]> https://www.306oc.co.uk/forum/showthread.php?tid=37657
Show me what you got
Edit: anyone knows where to get the parts from the Haynes's modifying manual, as well as buying parts directly from Peugeot. Thanks for any help]]>
Show me what you got
Edit: anyone knows where to get the parts from the Haynes's modifying manual, as well as buying parts directly from Peugeot. Thanks for any help]]> <![CDATA[5 door roof rack]]> https://www.306oc.co.uk/forum/showthread.php?tid=37637 Sat, 15 Aug 2020 15:40:37 +0100 Ben Jay]]> https://www.306oc.co.uk/forum/showthread.php?tid=37637 https://www.ebay.co.uk/itm/164339207772]]> https://www.ebay.co.uk/itm/164339207772]]> <![CDATA[306 morettes for sale]]> https://www.306oc.co.uk/forum/showthread.php?tid=37636 Sat, 15 Aug 2020 15:22:11 +0100 Ben Jay]]> https://www.306oc.co.uk/forum/showthread.php?tid=37636 Morettes with no reserve

will definitely need a referb. Also will need the side lights]]> Morettes with no reserve

will definitely need a referb. Also will need the side lights]]> <![CDATA[Rebuilt 306 gti axle]]> https://www.306oc.co.uk/forum/showthread.php?tid=37635 Fri, 14 Aug 2020 11:48:04 +0100 Stef205]]> https://www.306oc.co.uk/forum/showthread.php?tid=37635 Painted and lowered - 30mm

£300

Please visit my page for more details

https://www.facebook.com/axlesbystef/]]> Painted and lowered - 30mm

£300

Please visit my page for more details

https://www.facebook.com/axlesbystef/]]> <![CDATA[306 Beam Tube/20mm Bars/24mm ARB]]> https://www.306oc.co.uk/forum/showthread.php?tid=37602 Sat, 20 Jun 2020 18:49:31 +0100 Alan_M]]> https://www.306oc.co.uk/forum/showthread.php?tid=37602 306 Beam Tube, 20mm Torsion Bars and 24mm ARB & end plates (ARB has pitting - hence). £70

Located near Basingtoke, Hampshire.]]> 306 Beam Tube, 20mm Torsion Bars and 24mm ARB & end plates (ARB has pitting - hence). £70

Located near Basingtoke, Hampshire.]]> <![CDATA[volvo gt2052v - revised]]> https://www.306oc.co.uk/forum/showthread.php?tid=37593 Tue, 16 Jun 2020 10:10:10 +0100 nominous]]> https://www.306oc.co.uk/forum/showthread.php?tid=37593 VNT side cleaned up.
Been stored for that VNT project which I never completed...

£70 plus post or collect warrington cheshire.

EDIT: revised price and model.
Pics here:
https://www.ebay.co.uk/itm/193520576926

yes, the bidding starts at £50 and I'm offering it for £70 here as I expect it to sell for more on ebay than £70.]]> VNT side cleaned up.
Been stored for that VNT project which I never completed...

£70 plus post or collect warrington cheshire.

EDIT: revised price and model.
Pics here:
https://www.ebay.co.uk/itm/193520576926

yes, the bidding starts at £50 and I'm offering it for £70 here as I expect it to sell for more on ebay than £70.]]>