05-09-2013, 08:56 PM
little milestones today.
finished the underside and rear suspension and rear brakes...so all suspension, brakes and undersealing and exhaust all done.
just need to give front calipers a lick of paint.
also made my battery box:
just a little fixing bracket needed to stop it moving
and heres the underside with it all undersealed, dampers on inc toms stickers, new powerflex bump stops...serious swines to get in...
fitted exhaust and spare wheel too now.
other parts of day spent continuing mocking up and cutting/shaping bits for intercooler piping...
piping all sorted, just needs the intercooler brackets to be made and it can be plumbed in.
leaves tidy gap too for oil cooler...hoping pipes arrive tomorrow letting me finish it all properly.
then its just oil breather and airfilter and fit up front end
oh yeah, wire in sensors...but got all the wiring and boost pipe all through bulkhead today too.
Bit of a fail....the strut brace properly fouls the M/C. Like if I bolt it down it will break the M/C!
The strut brace I have is the DT type, that goes around the TMIC on the 1.9s...does anyone know clearances the normal strut braces have???
finished the underside and rear suspension and rear brakes...so all suspension, brakes and undersealing and exhaust all done.
just need to give front calipers a lick of paint.
also made my battery box:
just a little fixing bracket needed to stop it moving
and heres the underside with it all undersealed, dampers on inc toms stickers, new powerflex bump stops...serious swines to get in...
fitted exhaust and spare wheel too now.
other parts of day spent continuing mocking up and cutting/shaping bits for intercooler piping...
piping all sorted, just needs the intercooler brackets to be made and it can be plumbed in.
leaves tidy gap too for oil cooler...hoping pipes arrive tomorrow letting me finish it all properly.
then its just oil breather and airfilter and fit up front end
oh yeah, wire in sensors...but got all the wiring and boost pipe all through bulkhead today too.
Bit of a fail....the strut brace properly fouls the M/C. Like if I bolt it down it will break the M/C!
The strut brace I have is the DT type, that goes around the TMIC on the 1.9s...does anyone know clearances the normal strut braces have???
Wishes for more power...