Posts: 27
Threads: 6
Joined: Dec 2015
Reputation:
1
Location: France
Car Model/Spec: 205 GTI Diesel 2.1 TD
Thanks: 2
Given 1 thank(s) in 1 post(s)
Hi Friends.
What can a gtb2062vklr allow concerning the maximum egt on a Xud11T? For safe uses.
Thanks
Diesel parts designer:
-HDi/1.9td and 2.1 XUD11T forged HBeam conrods available in stock
-Custom ARP Head Studs kit available for HDi/1.9Td and 2.1 XUD11T
-Aluminium damper pulley for Hdi/Xud11T
-MFS prechamber for XUD
Ask for delivery
Posts: 20,092
Threads: 591
Joined: Nov 2012
Reputation:
54
Location: Cotswolds
Car Model/Spec: Stage 13 16v HDi
Thanks: 22
Given 68 thank(s) in 68 post(s)
I didn't even know they made a gtb2062vklr to be honest.
Ask garret be your best bet
Posts: 27
Threads: 6
Joined: Dec 2015
Reputation:
1
Location: France
Car Model/Spec: 205 GTI Diesel 2.1 TD
Thanks: 2
Given 1 thank(s) in 1 post(s)
Hi Piggy
In fact, it's a GTB2060VKLR with a MFS 62MM
I changed the angle of the outlet compressor
For the fitting of the KN filter, i made an adaptator
Diesel parts designer:
-HDi/1.9td and 2.1 XUD11T forged HBeam conrods available in stock
-Custom ARP Head Studs kit available for HDi/1.9Td and 2.1 XUD11T
-Aluminium damper pulley for Hdi/Xud11T
-MFS prechamber for XUD
Ask for delivery
Posts: 1,748
Threads: 41
Joined: Dec 2011
Reputation:
12
Location: Midlands
Car Model/Spec: Dtractor
Thanks: 0
Given 6 thank(s) in 6 post(s)
Beauty,
As with all VNT's, upto 800 should be fine.
I have seen 1000+ many times with no issues for short bursts, but 800 seems safe for long hauls.
1300 is when stuff can go real wobbly and you want to see the death of your blower.
All subject to opinion based on different peoples experiences
Posts: 27
Threads: 6
Joined: Dec 2015
Reputation:
1
Location: France
Car Model/Spec: 205 GTI Diesel 2.1 TD
Thanks: 2
Given 1 thank(s) in 1 post(s)
Thanks Dave.
First test with 1.4Bar and 9mm headpump. I reached to 690deg.
I think with the next 11mm it will increase fastly....
But i gonna check frequently....
This turbo is wonderful!!!
Diesel parts designer:
-HDi/1.9td and 2.1 XUD11T forged HBeam conrods available in stock
-Custom ARP Head Studs kit available for HDi/1.9Td and 2.1 XUD11T
-Aluminium damper pulley for Hdi/Xud11T
-MFS prechamber for XUD
Ask for delivery
Posts: 6,258
Threads: 371
Joined: Feb 2014
Reputation:
29
Location: suffolk
Car Model/Spec: ford fiesta
Thanks: 4
Given 82 thank(s) in 82 post(s)
I used to see about 800 on a sustained pull with 11mm gt2052s blowing clean no smoke. I could get it higher and did a few times. I had to fettle it a fair bit though. First setup of the 11mm I was seeing 900+ a few times before I got round to changing anything. Seems to have lived on fine though.
On a break from 306oc for personal reasons. If anyone needs or wants me most of you have my number and or facebook messenger
Thanks for the good times guys n gals. I might be back. Who knows.
Posts: 27
Threads: 6
Joined: Dec 2015
Reputation:
1
Location: France
Car Model/Spec: 205 GTI Diesel 2.1 TD
Thanks: 2
Given 1 thank(s) in 1 post(s)
Ok. Eager to fit my futur 11mm pump
Diesel parts designer:
-HDi/1.9td and 2.1 XUD11T forged HBeam conrods available in stock
-Custom ARP Head Studs kit available for HDi/1.9Td and 2.1 XUD11T
-Aluminium damper pulley for Hdi/Xud11T
-MFS prechamber for XUD
Ask for delivery
![[Image: 22f2b6b2-758b-4c1c-96fb-6fa9c6059b13_zpsf306b56b.jpg]](http://i585.photobucket.com/albums/ss299/Ha11elujaz0rs/22f2b6b2-758b-4c1c-96fb-6fa9c6059b13_zpsf306b56b.jpg)
