205 GTi 2.1 TD - XUD11T

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
205 GTi 2.1 TD - XUD11T
#1
Hi Friends.

A long personal project, started in 2009, lots of work, lots of nights. But it runs....From France

   

2.1 TD 12s Forged, with GTB2060VKLR MFS 62mm

   

Custom 4 in 1 exhaust manifold and intake manifold
   


First version OEM conrods broke
   

NOW CUSTOM 2.1 TD FORGED CONRODS 
   
Diesel parts designer:
-HDi/1.9td and 2.1 XUD11T forged HBeam conrods available in stock
-Custom ARP Head Studs kit available for HDi/1.9Td and 2.1 XUD11T
-Aluminium damper pulley for Hdi/Xud11T
-MFS prechamber for XUD
Ask for delivery
Reply
Thanks given by:
#2
Welcome along. Well done on braking a rod. I don't think anyone in the UK has amanged that yet
On a break from 306oc for personal reasons. If anyone needs or wants me most of you have my number and or facebook messenger
Thanks for the good times guys n gals. I might be back. Who knows.
Reply
Thanks given by:
#3
bienvenue my friend, i'll bet that goes like shit off a shovel! Big Grin
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
#4
Excellent work.
Good to see the XUD11 in a 205, not seen that before.
How does it handle with the big engine?
                                             [Image: 2ljm03k.jpg]


                                                                                      I Don't Have A 306.
Reply
Thanks given by:
#5
Smile 
(07-06-2018, 05:48 PM)Danny Wideboy Wrote: Excellent work.
Good to see the XUD11 in a 205, not seen that before.
How does it handle with the big engine?

This sort of swap is very famous in France!

The torque is crazy. And handle very high but the setup is not ready for the full power. 

I have some adjustements with the front frame. And for the moment the turbo is not managed by my electronic boost controller. But engine is very powerful yet Smile



Diesel parts designer:
-HDi/1.9td and 2.1 XUD11T forged HBeam conrods available in stock
-Custom ARP Head Studs kit available for HDi/1.9Td and 2.1 XUD11T
-Aluminium damper pulley for Hdi/Xud11T
-MFS prechamber for XUD
Ask for delivery
Reply
Thanks given by:
#6
Awesome Big Grin Did you fit a Bosch pump or keep the Lucas?
Reply
Thanks given by:
#7
Yes of course Bosch is the best 494 9mm original with mods inside.

I m making a new 11mm for the next stage
   
   
Diesel parts designer:
-HDi/1.9td and 2.1 XUD11T forged HBeam conrods available in stock
-Custom ARP Head Studs kit available for HDi/1.9Td and 2.1 XUD11T
-Aluminium damper pulley for Hdi/Xud11T
-MFS prechamber for XUD
Ask for delivery
Reply
Thanks given by:
#8
My exhaust manifold

   

I prefer to pass the intake pipes under the engine, for more space over

   

The flywheel is lightened -2.2kg

   
Diesel parts designer:
-HDi/1.9td and 2.1 XUD11T forged HBeam conrods available in stock
-Custom ARP Head Studs kit available for HDi/1.9Td and 2.1 XUD11T
-Aluminium damper pulley for Hdi/Xud11T
-MFS prechamber for XUD
Ask for delivery
Reply
Thanks given by:
#9
I designed this new aluminium pulley for xud11T and 2.0 HDi, now it's 520gr against 2.2kg before.
Available for who wants the same.

   

   

   
Diesel parts designer:
-HDi/1.9td and 2.1 XUD11T forged HBeam conrods available in stock
-Custom ARP Head Studs kit available for HDi/1.9Td and 2.1 XUD11T
-Aluminium damper pulley for Hdi/Xud11T
-MFS prechamber for XUD
Ask for delivery
Reply
Thanks given by:
#10
Looks good!!!

I'd strongly advise fitting a later 206 or 406 HDi alternator with that pulley if you can - it will prevent damage to the belt, idler and dampener. With the engine rotating assembly so light, the inertia in the heavy alternator can cause damage to the belt. That's why HDis have a rubber pulley or a freewheeling clutched alternator instead.
(16-05-2016, 10:45 AM)Toms306 Wrote: Oh I don't care about the stripped threads lol, that's easily solved by hammering the bolt in. Wink
Nanstone GTD5 GT17S - XUD9TE
Volvo V50 D5 R-Design SE Sport - Daily cruise wagon.
Reply
Thanks given by:
#11
Ok Ruan. Thanks for the advice. But are you talking about the timing belt or the alternator belt? Not sure to understand....
Diesel parts designer:
-HDi/1.9td and 2.1 XUD11T forged HBeam conrods available in stock
-Custom ARP Head Studs kit available for HDi/1.9Td and 2.1 XUD11T
-Aluminium damper pulley for Hdi/Xud11T
-MFS prechamber for XUD
Ask for delivery
Reply
Thanks given by:
#12
He means your alternator belt.

The alternator will become too heavy to turn because the drive pulley is so lightweight, the belt will slip/vibrate etc and become damaged.

Newer alternator from a 406 HDi has a freewheel alternator. It has a "clutch" on it which operates one way. a bit like a bicycle wheel.
A moments silence please, for our brothers in the NAD-zone.
Reply
Thanks given by:
#13
So the risk is only to brake the alternator belt.

I run like that during more than 5000km before with my first R.I.P 2.1td (standard conrods broken).
And the belt is still alive.

Do you have picture of the 406 hdi alternator?
Diesel parts designer:
-HDi/1.9td and 2.1 XUD11T forged HBeam conrods available in stock
-Custom ARP Head Studs kit available for HDi/1.9Td and 2.1 XUD11T
-Aluminium damper pulley for Hdi/Xud11T
-MFS prechamber for XUD
Ask for delivery
Reply
Thanks given by:
#14
(21-07-2018, 10:20 PM)Biggen Wrote: So the risk is only to brake the alternator belt.

I run like that during more than 5000km before with my first R.I.P 2.1td (standard conrods broken).
And the belt is still alive.

Do you have picture of the 406 hdi alternator?

The risk is to the belt, alternator and the dampener - it will be made much worse with the lighter pulley. You can usually tell the clutched, freewheeling alternators as they have a cap over the pulley like so:

[Image: CA1553%20(4)-400x400.jpg]

It will also help the engine's response as the the alternator can spin down freely, so the engine revs fall faster, meaning faster gear changes etc.
(16-05-2016, 10:45 AM)Toms306 Wrote: Oh I don't care about the stripped threads lol, that's easily solved by hammering the bolt in. Wink
Nanstone GTD5 GT17S - XUD9TE
Volvo V50 D5 R-Design SE Sport - Daily cruise wagon.
Reply
Thanks given by:
#15
Thanks a lot for this information, i have never heard about this new technogy. I know only the old engines...hahaha

But I will test like that. I have never got problems before. I will let you know.

The revs already fall faster with 5kg less on the crankshaft....
Diesel parts designer:
-HDi/1.9td and 2.1 XUD11T forged HBeam conrods available in stock
-Custom ARP Head Studs kit available for HDi/1.9Td and 2.1 XUD11T
-Aluminium damper pulley for Hdi/Xud11T
-MFS prechamber for XUD
Ask for delivery
Reply
Thanks given by:


Forum Jump:


Users browsing this thread: 1 Guest(s)