Sam's low boost supercharged rallye

[Alee83]

Your no standard look, what about mine, Matt's and the black one with red wheels!!!?

[7057sam]

Lee ill have to check yours out my mate hovis who's got a black caged rallye be game aswell :d

So would be
Me
Lee
Matt


Just of the top of my head and think of 5 more, but I can post a thread on gti6.com.
I have that mark doe on Facebook I can pm and get the ball rolling ?

[7057sam]

Right I give it a quick clean today .Also picking up a strut brace tomorrow and hopefully on 29th be lowering the back end and changing the clutch cable and get to the route of my abs/general shit brakes!








Things are kinda comming together on the car.Getting it on the rollers in april so be fun to see what it comes out with I'am hoping 180bhp

[Matt]

Sounds good to me, I love hovis' Rallye it's far too porno!

[7057sam]

Sounds good to me, I love hovis' Rallye it's far too porno!

Yeah and he should have it on bodies by then.

I actually Facebooked messaged mark dow who's quite high up at PFC and dealing with some aspects of FCS.

I asked him and he basically said we can all come in with are respective clubs and either become a extension of a club stand

I'll make a thread and start generating interest

[7057sam]

So today when for a 30 mile hoon in search for my strut brace, took mate with me(don't think he was expecting the rallye to be that quick :laugh )

It still really surpises me,even start line speed between 4k to 6.5/7k its just brutal.

I am in the process of getting a manifold bung resonator and PTFE gasket then I'll be ready to fit this little lot :





Not 100 percent shure about manifold and fuel rail colour.maybe do mani gloss black

[ozonehostile]

that cover looks great

[Alee83]

It will sound AWSOME with the bung in, and take your time to make sure the inlet is sat right before tightening it up with the PTFE. Watch the brackets under the front of the mani, make sure it doesn't catch... I broke 2 mani's that way...

[7057sam]

It will sound AWSOME with the bung in, and take your time to make sure the inlet is sat right before tightening it up with the PTFE. Watch the brackets under the front of the mani, make sure it doesn't catch... I broke 2 mani's that way...

Ah cl i am abit heavy handed so will take extra care.i'am really struggling to get a PTFE gasket anyone one here do them?

I've also got some cylinder head/block paint so going get to all I can get too.be putting a alloy crank pully on aswell as well as changing the cambelt or adjust it as it appears to save slipped slightly across.

Get shot of the Pas aswell and will be sanding slam panel and remove the battery boxplate or maybe lazy and cover it up the induction hosing.

[Alee83]

Someone on the 6 forum was doing then, but they getting rare! I got mine off a guy on .net but not sure he does them anymore. Standard gaskets are just as good!!

[Ben]

Personally I'd leave the rear height as it is, looks like it sits nicely?

[7057sam]

Alex --. yeah philpm does with he pm'd me to saying price of ptfe has shot up but he did say about doing group buy in a month or 2.i only wanted one as im changing over the mani's and seems to good upgrade to keep engine temp down

Also investing in some braided fuel lines and oil catch tank

Yeah cheers ben I think it's settled to quite a nice height atm

[rocker8742]

I'd bed interestedin a ptfefor when i get around to fitting my new mani

Car is looking really nice mate

[sam]

Wanna swap cars?

[306GT30]

Looks great Sam...

Not liking the color on the fuelrail

get some VHT wrinkel paint in black and paint it..

Loving the carbon part, to bad ive got a S16 :S

[7057sam]

I'd bed interestedin a ptfefor when i get around to fitting my new mani

Car is looking really nice mate

I've good things about them but ptfe gone up in price so would be like twice if not more than a pug one.

---

Wanna swap cars?

Should hear the sound it make, then you'd really want it

---

Looks great Sam...

Not liking the color on the fuelrail

get some VHT wrinkel paint in black and paint it..

Loving the carbon part, to bad ive got a S16 :S

Paul its like suzi swift chilli red, really don't as why

Any tips for stripping it to bare metal?

The cf bit been gathering dust,I can't bring myself to fit it until I strip the engine bay down.I also thinking about starting to do my own carbon skimming

[floz123]

Love the cam cover! Nice work mate

[ginge191]

I'd bed interestedin a ptfefor when i get around to fitting my new mani

Car is looking really nice mate

They make a substantial difference; ask Niall, the only difference when we went for a blast was the inlet gasket.

[306GT30]

Sam, just use the paintremover that you can get in a tin



something like this.. it will come off in seconds up to 10 layers of paint, it will eat it away

(did mine the same way )

[Tallguy_2]

Really nice and smart mate,

What tracks and days are you hoping to do this year?

[7057sam]

Love the cam cover! Nice work mate

So do I really lucky got them for £35 and they never seen a engine

---

I'd bed interestedin a ptfefor when i get around to fitting my new mani

Car is looking really nice mate

They make a substantial difference; ask Niall, the only difference when we went for a blast was the inlet gasket.

Ok I will do does the temp drop slightly?

---

Sam, just use the paintremover that you can get in a tin



something like this.. it will come off in seconds up to 10 layers of paint, it will eat it away

(did mine the same way )

Ok cheers paul, I actually work in 1 of Europe s biggest paint distribution warehouse so should find somthing

---

Really nice and smart mate,

What tracks and days are you hoping to do this year?

Hey thanks alot your doing great things will the blaze, mega jealous of those bucket seats

Well I found a track evening at Snetterton for £49.00,these also fcs, mallory, trax, pugfest, and hopefully a few notice days im hoping to go.

I just need to do tracking, 4 wheel laser alignment, clutch cable and balance one of the many sets of clones I have atm but this should be done by the 25th of this month.

[Tallguy_2]

I love snetterton, spent a lot of good days there, dad won the 24hrs there.

Yeah some of the track days at the shows look good value however I don't know how good they are?
Cyclones lol I've got sets coming out my ears however none of them fit now! Lol. You've got a few sets to haven't you?

I do like the attention to detail on yours though, what's next? Seats may be available soon if you want them?

[ginge191]

In fairness i couldn't tell you as the car was bought with the gasket already on, i just know it makes a significant power increase - enough to pull away from a standard GTI, what that is in power, i couldnt say.

[Tallguy_2]

What exactly is the difference of this gasket?

[7057sam]

I love snetterton, spent a lot of good days there, dad won the 24hrs there.

Yeah some of the track days at the shows look good value however I don't know how good they are?
Cyclones lol I've got sets coming out my ears however none of them fit now! Lol. You've got a few sets to haven't you?

I do like the attention to detail on yours though, what's next? Seats may be available soon if you want them?

I got 8 clones, and a set of t1r's and a set of ventus v12's so pretty well equipped for wet and dry days.But as soon as I get through the tryes I'll get some more td's and get some 406 v6 brembo's


Next is :get spare wheels balanced and change tryes to the t1r's
:get the tracking and alignment done
:and most importantly do a trackday!!!!!

Yeah give me a pm when you ready to sell your buckets

Ah they s a open pit eve at snetterton on april 22th only £49.99

---

What exactly is the difference of this gasket?

They are meant to stop or at least minimise heat soak from the engine to inlet manifold. The heat soak occurs if you are sat in traffic or just generally sat there with the engine running or even once your engine is turnt off as the engine starts to lose heat. 

when the inlet manifold is warm due to the engine soak it makes acceleration slightly sluggish due to the air passing through the manifold being at a warm to hot
temperature. 

However once you have driven 5 minutes down the road the heat off the manifold drops to outside air temp obviously due to air passing through it and around it.

People do say they is a slight increase in acceration

[7057sam]

Had a very productive weekend of gathering car bits.
First ups these little gems.Team dynamics pro 1.2 15x7 et 35.
they were on bay and decided to sent a msg to him as he was only about a hour away. Received this(sorry about my spelling, was seriously hanging from the previous night)



needless to say they sitting in my boot later that evening
Here s picture of them





condition is pretty messy but I quite like refurbing wheels so not to bothered 

2nd buy 4 t1r's to replace 2 of the fronts and other 2 to make up a track set
£50 of a mate all well above the limits almost too good to track.

[Eeyore]

Look at you... stealing my tyres D:

[ozonehostile]

your such a team dynamics whore haha

[7057sam]

Look at you... stealing my tyres D:

You snook you lost !!! Haha you were about a minute later. when round to harry today, had a little look at the 205 so freaking epic

---

your such a team dynamics whore haha

Ive got 4 sets of wheels and 20 tryes lol time to sell the cyclones they will be funding my brembo tho, hopefully be running them before july

[Eeyore]

had you not seen his 205 before? its so epic! Might have to give me a heads up with the cyclones!