01-08-2016, 09:51 AM
Hi,
The one I got didn't fit the car when I had it a part.
I was wondering which ones you lot use?
The one I got didn't fit the car when I had it a part.
I was wondering which ones you lot use?
Clutch alignment tool
|
01-08-2016, 09:51 AM
Hi,
The one I got didn't fit the car when I had it a part. I was wondering which ones you lot use?
01-08-2016, 10:13 AM
I use a Valeo one, came free with one of the clutches I did.
01-08-2016, 10:16 AM
I cut the input shaft off a dead gearbox and put a handle on the end
1990 Peugeot 205 GTi 1.9 // 1991 Peugeot 205 GTi 1.9 16v // 1992 Peugeot 205 GTi 1.9 // 1999 Peugeot 306 HDi Estate
01-08-2016, 11:21 AM
Bought a universal draper tool, never used it in the end and just got lucky getting the gearbox on!
01-08-2016, 11:24 AM
I use old input shafts, tools and most of the time of ive got bothing that fits line it up by eye with a 1/2 or 3/8 extension
On a break from 306oc for personal reasons. If anyone needs or wants me most of you have my number and or facebook messenger
Thanks for the good times guys n gals. I might be back. Who knows.
01-08-2016, 11:43 AM
I used a deep 1/2 socket last time iirc, or the clutch tool that came in my gti6 valeo kit.
Night Blue VW Golf 7 GTD : Bianca 306 Rallye : Mini Cooper D (The Mrs')
HDi Owner for 200k/9 years
01-08-2016, 12:33 PM
As some have said i use on the 306s the 1 that comes in with a valeo clutch. Shame not really any other makes do them and for the different cars as well.
01-08-2016, 12:46 PM
valeo blue thing that came with the kit
https://www.check-mot.service.gov.uk/ GTI6 Info Don’t drive faster than your guardian angel can fly.
01-08-2016, 12:47 PM
(01-08-2016, 10:13 AM)Toms306 Wrote: I use a Valeo one, came free with one of the clutches I did. My Valeo kit didn't come with one (01-08-2016, 10:16 AM)powerandtorque Wrote: I cut the input shaft off a dead gearbox and put a handle on the end I was thinking about this last night, (01-08-2016, 11:21 AM)tigerstyle Wrote: Bought a universal draper tool, never used it in the end and just got lucky getting the gearbox on! I'm now thinking that the way I do it with a deep 3/8" socket isn't the best. Is the alignment tool only to centralise the clutch plate to allow the input shaft to locate or does it actually centralise the plate for when it's in use? By this I mean if the plate isn't smack in the middle will the plate spin on the piss? I'm thinking when you press the clutch the pressure plate releases and the clutch plate will be floating, is that right?
01-08-2016, 01:21 PM
Clutch is always centered on the gearbox splines?
01-08-2016, 01:25 PM
Cut off input shaft
01-08-2016, 10:27 PM
Snapped off broom handle last time lol
Sent from my iPhone using Tapatalk
01-08-2016, 10:35 PM
Peugeot's Tool
|
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
torsion bar removal tool | bashbarnard | 9 | 3,602 |
25-06-2017, 01:43 PM Last Post: welshpug |
|
Front Wheel Alignment | pug306driver | 1 | 1,476 |
09-07-2016, 07:41 PM Last Post: DeeTurbo |
|
Laser wheel alignment results | JTaylor2005 | 1 | 1,228 |
11-05-2016, 05:02 PM Last Post: Toms306 |