Needed a little run around

[mooey65]

Had my first go at wrapping tonight its not as easy as it seems

[mooey65]

Iv not updated this for a few months.

New CV joints fitted.
I got a second front strut bar fitted now a long with a few stickers on the underside of my bonnet. I also have some refurbished alloys with new T1rs on
New gearknob fitted.
Wiring harness for my HID's.
LED rear light blubs the crap and have been sent back.
Fitted a new alloy radiator with silicone hoses, K&N panel filter and a grounding kit.





This is how crap them bulbs are
http://www.youtube.com/watch?feature=pla...pGjY0jpOQs

---

Iv been told my engine bay looks like a Noddy car.




New NGK Laser Platinum plugs then had the car on the rollers and.....

176.5bhp @6900rpm
168.1ft-lbs@3200rpm

http://www.youtube.com/watch?v=hnK2-gffx...ure=relmfu
Not at all bad for a 16 year old 2.0 N/A car.

[JackLewis_Dturbo]

surely a dturbo would make more sense lol

[Arron]

So what are these standard... good line

[mooey65]

surely a dturbo would make more sense lol

More sense how lol

So what are these standard... good line

168bhp and around 137 lb-ft at new

[C.A.R.]

These are lovely cars and pretty-much bulletproof. What's the situation with the 'Beams' red-top engine that the Gen6 guys always used to harp on about? Tweaked timing? Or different cylinder head altogether? And what figures are on those engines?

Much more reliable than the Gen7 which replaced it in my opinion. My syncro was f*cked between 2/3/4 gears for starters, and then there was that expensive-sounding tick from the engine when cold...

[mooey65]

These are lovely cars and pretty-much bulletproof. What's the situation with the 'Beams' red-top engine that the Gen6 guys always used to harp on about? Tweaked timing? Or different cylinder head altogether? And what figures are on those engines?

Much more reliable than the Gen7 which replaced it in my opinion. My syncro was f*cked between 2/3/4 gears for starters, and then there was that expensive-sounding tick from the engine when cold...

Yamaha beams engine has more power the out put is 200-220bhp ish and has VVTI not worth the £1500 most want for the engines alone.

Power deck spacer coming soon I will be happy if I can get this engine up to around 185bhp but there is not much that can be done.

[mooey65]

well iv fitted my spacer and had it on a dyno

186.3 bhp @ 7116rpm

[mooey65]

Back up for sale

[mooey65]

Looks like am keeping it market is crap for theses car so am thinking a tracking it.

http://www.youtube.com/watch?v=LjeYaw_Tq...0w&index=1