overheating!

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
overheating!
#1
i am having overheating issues when im giving it some beans.

iv removed the thermostat to rule that out, opens fine though when i tested it.

normal running temp with no thermostat is 75degrees, runs perfectly fine.

problem is, as soon as i hit 100mph 5th gear 3.5-4k my engine temp flys from 80 straight upto 100degree's and beyond in a matter of seconds, and i mean litteraly seconds, it seriously overheats, heaters go scorching.

when i let off the throttle and drop my speed it cools back to 80degrees quite quickly.

could my fueling or wastegate adjustments be causing this??? or is it somthing more serious.

thanks for any help
tim
Reply
Thanks given by:
#2
oh forgot say that my fuel is turned up 1 1/4 turns and my wastegate arm is all the way across at its shortest (dont know if it should be that far lol)

also theres a small arm on the back of my fuel pump, used to have a blue peice of plastic covering it, what does this arm do? i lenghned it a few turns but carnt say i noticed any differance.
Reply
Thanks given by:
#3
Don't drive at 100mph and it will be fine Smile
[Image: image_zps45f2003b.jpg]

Team Doesn't own a 306
Reply
Thanks given by:
#4
yeah ^^^^

(We dont mean to assume of course but we do assume you're doing this on a track or private road??)

fyi...know your pump and what to adjust before just trying something...like lengthening an arm
Wishes for more power...
Reply
Thanks given by:
#5
yeh its on a private road.

it shouldnt just go that hot tho should it? id have though it should sit at that happily, thats why i ask
Reply
Thanks given by:
#6
What kind of condition is your radiator in? Mine used to get up to around 90* on a rag but never above it til the hg blew
Supercharged XUD Project - Dead

HDi Cabby Project Click
Reply
Thanks given by:
#7
Mine shoots up to 90 if i start working it...
Doesnt even own a 306.
Reply
Thanks given by:
#8
i think iv cracked it, i had my wastewgate arm all the way across so where was no thread left, iv unscrewed it about halfway and theres much more power asnd it dosnt overheat. must have been runing super lean?
Reply
Thanks given by:
#9
Odd. Very odd
Wishes for more power...
Reply
Thanks given by:
#10
(13-06-2013, 09:12 PM)therefused Wrote: i think iv cracked it, i had my wastewgate arm all the way across so where was no thread left, iv unscrewed it about halfway and theres much more power asnd it dosnt overheat. must have been runing super lean?

You can't run a diesel lean Wink

Heat in a diesel engine is from running excessively rich (billowing smoke)
(16-05-2016, 10:45 AM)Toms306 Wrote: Oh I don't care about the stripped threads lol, that's easily solved by hammering the bolt in. Wink
Nanstone GTD5 GT17S - XUD9TE
Volvo V50 D5 R-Design SE Sport - Daily cruise wagon.
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  Stage 1 XUD, overheating a bit? johnny625 7 3,877 18-07-2018, 10:38 PM
Last Post: johnny625
  Coolant system pressurising but not overheating?! D.r.1989 39 5,945 22-03-2015, 10:13 PM
Last Post: D.r.1989
  Why prone to overheating? nominous 13 3,690 17-04-2014, 11:46 AM
Last Post: nominous

Forum Jump:


Users browsing this thread: 1 Guest(s)