03-10-2016, 08:03 PM
Ph.1 gti6, so only a driver's airbag and seatbelt pretensioners.
The airbag light is flashing. Previously, this has been solved by replacing the driver's seat connector, however, so far I have:
- Removed the driver's seat connector and soldered the wires together
- Soldered the passenger seat wires together
- Removed the resistor in place of the steering wheel airbag and re-soldered that to the wires
- Soldered one of the two plugs next to the ACU
- Unplugged and plugged the ACU back in
After all of this, it is still flashing. I could solder the other connector next to the ACU but I doubt that it is this. I have tried wiggling it, plugging it back in etc.
Are there any other things which can cause a flashing airbag light? Could a fuse be blown?
The airbag light is flashing. Previously, this has been solved by replacing the driver's seat connector, however, so far I have:
- Removed the driver's seat connector and soldered the wires together
- Soldered the passenger seat wires together
- Removed the resistor in place of the steering wheel airbag and re-soldered that to the wires
- Soldered one of the two plugs next to the ACU
- Unplugged and plugged the ACU back in
After all of this, it is still flashing. I could solder the other connector next to the ACU but I doubt that it is this. I have tried wiggling it, plugging it back in etc.
Are there any other things which can cause a flashing airbag light? Could a fuse be blown?
This post is an artistic work of fiction and falsehood. Only a fool would take anything posted above as fact.
62k Diablo Phase 1 Gti-6: Project Thread
62k Diablo Phase 1 Gti-6: Project Thread
