Search Results
Post			Author	Forum	Replies	Views	Posted [asc]
		Thread: Front Fog Lights Post: RE: Front Fog Lights I had the same problem but mine was a dodgy relay in the fuse box so I would check that before cutting the block off	nttrucker	Electrics	7	2,601	07-12-2013, 10:11 PM
		Thread: ph3 rcl Post: RE: ph3 rcl Open the drivers door and wiggle the door loom a bit might be a dodgy wire connection mine does it	nttrucker	Electrics	6	2,127	29-09-2013, 08:48 PM
		Thread: Normal running temps Post: RE: Normal running temps I had a new engine put in mine that's is a 1.4 but mine runs at about 80. I'd check your thermostat. it should start to open at about 89 and fully open at about 95. the temperature on mine drops ba...	nttrucker	TU Petrol Engines	6	1,866	28-09-2013, 05:39 PM
		Thread: need advice Post: RE: need advice pugjohn306 Wrote: (22-09-2013, 12:27 PM) -- nttrucker Wrote: (22-09-2013, 10:40 AM) -- cheers mate Thanks for the advice got all back together now and sounds quiet as anything so just got to take fo...	nttrucker	TU Petrol Engines	12	5,357	22-09-2013, 03:11 PM
		Thread: need advice Post: RE: need advice cheers mate Thanks for the advice got all back together now and sounds quiet as anything so just got to take for a retest now to see if that has reduced the emissions	nttrucker	TU Petrol Engines	12	5,357	22-09-2013, 10:40 AM
		Thread: need advice Post: RE: need advice that's where I was going wrong I was putting the clamp just in front of the flaired bit on the cat	nttrucker	TU Petrol Engines	12	5,357	21-09-2013, 08:01 PM
		Thread: need advice Post: RE: need advice that's the clamp I've got and you saying that about the collers I think that I might have been putting the clamp in the wrong place so i'll have a look tomorrow thanks for the info	nttrucker	TU Petrol Engines	12	5,357	21-09-2013, 07:05 PM
		Thread: need advice Post: RE: need advice pugjohn306 Wrote: (21-09-2013, 06:06 PM) -- You shouldnt need a new clamp.. Use your old clamp mate is the new clamp the one with the lip on it.??? -- ok i'll try it with the old clamp to see what...	nttrucker	TU Petrol Engines	12	5,357	21-09-2013, 06:23 PM
		Thread: need advice Post: need advice Just moted car and it failed on the emissions the mot tester said if I change the cat it should pass. Well bought a new cat and tried to fit it but when I've put it in the joint between the cat and t...	nttrucker	TU Petrol Engines	12	5,357	21-09-2013, 05:25 PM
		Thread: spot lamps front trouble Post: RE: spot lamps front trouble thehytheman Wrote: (08-09-2013, 05:49 PM) -- im having a few problems locating a fault on my front spots, they just wont work. could you point me in the direction of fuse position and possible reason...	nttrucker	Electrics	2	1,688	08-09-2013, 06:02 PM
		Thread: Car Broke Down, Suspect Headgasket Post: RE: Car Broke Down, Suspect Headgasket When you took the water bottle cap off did it smell of petrol. If it there is it could be the head gasket going mine did exactly the same except without the revs building up. I ended up having to ha...	nttrucker	TU Petrol Engines	37	8,232	17-08-2013, 08:51 PM
		Thread: cooling system Post: RE: cooling system thanks for the offer but got another engine coming next week	nttrucker	TU Petrol Engines	12	5,032	03-08-2013, 08:40 AM
		Thread: cooling system Post: RE: cooling system well after all the suggestions from the guys on here and at work turns out the head gasket was knackered and the head was cracked in 2 places so new engine needed	nttrucker	TU Petrol Engines	12	5,032	02-08-2013, 10:07 PM
		Thread: cooling system Post: RE: cooling system 306Dan Wrote: (25-07-2013, 03:10 PM) -- Did you bleed up at the thermostat? Small Allen bolt there I've had air there that caused all manner of fun with the sensor iirc Failing that have a look ro...	nttrucker	TU Petrol Engines	12	5,032	27-07-2013, 04:05 PM
		Thread: cooling system Post: RE: cooling system John1.4 Wrote: (25-07-2013, 02:06 PM) -- stuck thermostat? take it out and dump it in some boiling water - see if it opens up? -- did that and fitted a brand new thermostat	nttrucker	TU Petrol Engines	12	5,032	25-07-2013, 02:38 PM
		Thread: cooling system Post: RE: cooling system well now i'm confused thought i had the problem I mentioned above but last night the temperature gauge told me it was overheating again so stopped on side of the road and opened the bleed valves on th...	nttrucker	TU Petrol Engines	12	5,032	25-07-2013, 01:26 PM
		Thread: wiring diagram Post: RE: wiring diagram thanks conor I'll give that a go and see what happens	nttrucker	Electrics	2	1,288	21-07-2013, 02:32 PM
		Thread: cooling system Post: RE: cooling system 306Dan Wrote: (21-07-2013, 08:54 AM) -- Did you fully bleed the heater matrix after changing the thermostat? -- thought I had but still wasn't right [hr] Thanks for the help guys. Car all sorted n...	nttrucker	TU Petrol Engines	12	5,032	21-07-2013, 02:28 PM
		Thread: cooling system Post: RE: cooling system Piggy Wrote: (21-07-2013, 04:41 AM) -- could be just a coincidence. what colour is your coolant and oil? -- the coolant was a rusty brown colour but put that down to not being changed recently and ...	nttrucker	TU Petrol Engines	12	5,032	21-07-2013, 05:45 AM
		Thread: wiring diagram Post: wiring diagram not sure if anyone can help I've got an air horn that plays whistle Dixie like the one on the general lee had it on my old 205 but would like to put it on my 396 but have lost the wiring diagram to fi...	nttrucker	Electrics	2	1,288	20-07-2013, 09:32 PM
		Thread: cooling system Post: cooling system bit of a strange one had to have the rocker box gasket replaced last week and up until then cooling system was fine. Now when I drive the car the temperature goes up high and when Turned the heaters...	nttrucker	TU Petrol Engines	12	5,032	20-07-2013, 09:25 PM
		Thread: The GTI's new home Post: RE: The GTI's new home thats a great workshop wish i had somewhere to build one that size but i have keep my 306 on the side of the road as i have no driveway	nttrucker	Photos Of Members / Cars	45	13,623	16-06-2013, 05:29 PM