Search Results
Post Author Forum Replies Views Posted [asc]
    Thread: Bonnet Exhaust exhaust legalities?
Post: RE: Bonnet Exhaust exhaust legalities?

No, makes sense why you never listen to anyone's advise... :-p #burn
Piggy DW10 HDi section 13 2,305 02-01-2019, 08:15 AM
    Thread: Bonnet Exhaust exhaust legalities?
Post: RE: Bonnet Exhaust exhaust legalities?

If you think for one second that a pipe straight from turbo out the bonnet will be 'just as loud' as your straight pipe all the way to the rear bumper... Then you must be stone deaf.
Piggy DW10 HDi section 13 2,305 31-12-2018, 11:02 PM
    Thread: Performance Rads
Post: RE: Performance Rads

I do have a guide on youtube for fitting a bigger Nissan alloy rad... Inexpensive and minimal mod to fit.
Piggy XU Petrol Engines 11 2,862 31-12-2018, 10:58 PM
    Thread: 2.0 HDI RHZ 109 turbo upgrade and MAP
Post: RE: 2.0 HDI RHZ 109 turbo upgrade and MAP

Get the parts you have, installed, then load the map/ask for a map to suit the parts/your need. You'll get NO low down torque with a Subaru TD04, if that's what you are referring to. However there are...
Piggy DW10 HDi section 6 2,104 13-10-2018, 04:37 PM
    Thread: *SOLD* HDI D TURBO ASTOR GREY £350
Post: RE: HDI D TURBO ASTOR GREY £350

Is this sold?
Piggy Cars 11 2,976 03-10-2018, 03:02 PM
    Thread: rear caliper
Post: RE: rear caliper

I may have one. PM me
Piggy Misc & Wanted 1 849 29-08-2018, 07:36 PM
    Thread: Suzuki Vitara XUD9 tuning
Post: RE: Suzuki Vitara XUD9 tuning

Just fit a manual boost controller. Wind that boost up. Reason old turbo wouldn't blow more than .3bar is because that's what it was set at on the wastegate!
Piggy XUD Section 29 5,693 29-07-2018, 07:37 PM
    Thread: Dr_Jekyll & Mr_Hyde Estate Project
Post: RE: Dr_Jekyll & Mr_Hyde Estate Project

Meh. These things happen mate. My first start with the 16v resulted in a full engine rebuild.... So just a ECU fault is no biggy
Piggy 306 Projects 1,282 341,530 27-07-2018, 07:51 PM
    Thread: Project 16v #theLEMOAN
Post: RE: Project 16v #theLEMOAN

Interesting to find last night that part of the ecu was physically fried... Causing the loss of earth. Concerning. Fresh ECU. Need to mount it properly I think. Also seemed to find that the vac isn'...
Piggy 306 Projects 495 143,809 26-07-2018, 09:30 AM
    Thread: Dr_Jekyll & Mr_Hyde Estate Project
Post: RE: Dr_Jekyll & Mr_Hyde Estate Project

Looking really smart
Piggy 306 Projects 1,282 341,530 25-07-2018, 05:08 PM
    Thread: French car show 2018
Post: RE: French car show 2018

Selling??? Noooo
Piggy Meet Photos 4 2,083 24-07-2018, 07:52 PM
    Thread: 3D printed cupholder
Post: RE: 3D printed cupholder

Hasn't Sam already done this?
Piggy Parts 12 1,780 23-07-2018, 10:04 AM
    Thread: Suzuki Vitara XUD9 tuning
Post: RE: Suzuki Vitara XUD9 tuning

Are these smaller turbos than fitted to the usual stuff like 306s and 406s? If the same... Keep tuning... 130bhp is just about attainable on stock turbo for the 306s.
Piggy XUD Section 29 5,693 22-07-2018, 01:28 PM
    Thread: New Daily
Post: RE: New Daily

Yeah nice motor. Super torquey and the boot is unreal on the estate. Keep an eye on front subframe bolts... They come loose!
Piggy Photos Of Members / Cars 17 3,484 21-07-2018, 08:21 PM
    Thread: Well known good garages (west midlands)
Post: RE: Well known good garages (west midlands)

Sounds like top mount Jack....obviously a bit tricky to tell from the other side of a OLED screen... Have you ever replaced them?
Piggy The Couch 4 1,070 21-07-2018, 10:54 AM
    Thread: PP2K Fault Codes
Post: RE: PP2K Fault Codes

So could be a faulty passenger lock motor. That or the wiring to it. If you mess about with locking/unlocking too much, it will stop working for a while just as you described
Piggy Electrics 8 2,174 21-07-2018, 06:38 AM
    Thread: Project 16v #theLEMOAN
Post: RE: Project 16v #theLEMOAN

https://youtu.be/2YWE1VTKuWc
Piggy 306 Projects 495 143,809 20-07-2018, 08:50 PM
    Thread: PP2K Fault Codes
Post: RE: PP2K Fault Codes

Does the left hand door lock all doors if you push the tab down? Or do nothing? CL should work on all doors
Piggy Electrics 8 2,174 20-07-2018, 08:48 PM
    Thread: Project 16v #theLEMOAN
Post: RE: Project 16v #theLEMOAN

I've EVEN seen them on turbo petrols right from the factory ... Hold the phone... Yes, that's right! High powered modern turbo charged petrol, from the factory. The horror.
Piggy 306 Projects 495 143,809 16-07-2018, 08:06 PM
    Thread: PP2K Fault Codes
Post: RE: PP2K Fault Codes

Disconnect battery for 30min. Then plug them all back as they should. Reconnect. You'll spend ages trying to meter out the wires from the doors. First unplug the loom from the door and check for cor...
Piggy Electrics 8 2,174 16-07-2018, 08:03 PM
    Thread: PP2K Fault Codes
Post: RE: PP2K Fault Codes

Door loom wiring failures cause lock issues, it's the wiring between A pillar and the door
Piggy Electrics 8 2,174 16-07-2018, 05:29 AM
    Thread: Project 16v #theLEMOAN
Post: RE: Project 16v #theLEMOAN

[attachment=31605] The ally one I made worked for a while... Then obv melted. :lol: I knew it would be a temp fix. Copper one I made up using a sort of die that I fabricated in case of need of one ag...
Piggy 306 Projects 495 143,809 15-07-2018, 06:16 PM
    Thread: Newbie needs keys!
Post: RE: Newbie needs keys!

Mate of mine has the dw8 with a Bosch, has run veg for years. It's slower than me on a miniature bicycle mind. Ph3 has chipped keys
Piggy Newbies 6 1,742 15-07-2018, 06:09 PM
    Thread: (1st post) Need answers about dw8(1.9LX D) - xud dt(1.9LXDT)
Post: RE: (1st post) Need answers about dw8(1.9LX D) - x...

Pah! 1.6 I'll have you know! And it states that way for all of one day in my ownership :lol: Be easier to find a 306 Xud9 for conversion tbh...due to all the parts needed as bash has highlighted!
Piggy Newbies 6 3,095 13-07-2018, 10:25 PM
    Thread: Newbie needs keys!
Post: RE: Newbie needs keys!

Locksmiths can cut the key... But no code the chip without that 4 digit code. Can get round it with an unlocked ECU. But bit of a waste on a dw8
Piggy Newbies 6 1,742 13-07-2018, 09:14 PM