Search Results
Post Author Forum Replies Views Posted [asc]
    Thread: Diagnostics gubbins/mapping
Post: RE: Diagnostics gubbins/mapping

Just bring it in to me, it will be much easier ;) I first started learning tuning myself on the 2.0 HDI almost 10 years ago now, and there's certainly a lot to learn haha. If you do want to go down t...
pro_steve DW10 HDi section 37 3,299 04-08-2017, 12:12 PM
    Thread: Peugeot Partner 2.0HDI 90 | Intercooler | Boostontroller | Gauge
Post: RE: Peugeot Partner 2.0HDI 90 | Intercooler | Boos...

I've done lots of playing around with the sid801 system. So to start you can't use bdm, you want a genuine mpps through the obd, or a clone fgtech v54 should do the job. Any cloned mpps tool will wip...
pro_steve DW10 HDi section 6 2,239 24-03-2017, 09:16 AM
    Thread: 208 1.4 hdi tuning options
Post: RE: 208 1.4 hdi tuning options

These usually come out around the 180 bhp mark if you do everything properly and the engine is in good condition. Drop me an email, I don't always remember to come on here.
pro_steve DW10 HDi section 22 5,410 24-03-2017, 09:03 AM
    Thread: 208 1.4 hdi tuning options
Post: RE: 208 1.4 hdi tuning options

Yes it shouldn't be too complicated to do the 1.4 if it uses the same ECU as the 1.6. Have a look and drop me an email when you're ready for it. And for the stage 3 map, get a read of the ECU and sen...
pro_steve DW10 HDi section 22 5,410 21-03-2017, 11:51 PM
    Thread: 208 1.4 hdi tuning options
Post: RE: 208 1.4 hdi tuning options

On a 63 plate you're going to be on an EDC17 Tri core ECU surely? It's a different turbo to the older 1.4 too, does look very tiny. Haven't played with one of these yet, but I've done a lot on my DS3...
pro_steve DW10 HDi section 22 5,410 20-03-2017, 06:06 AM
    Thread: 206 hdi no power
Post: RE: 206 hdi no power

Bring it in to me and I'll tell you what's wrong pretty quickly.
pro_steve DW10 HDi section 37 5,883 01-12-2016, 07:36 PM
    Thread: VAG 2.0T FMIC on my 306 HDI - DONE!!!
Post: RE: VAG 2.0T FMIC on my 306 HDI - DONE!!!

Nice work, great to see it done properly. I get quite a few in that have been bodged together!
pro_steve DW10 HDi section 22 4,632 01-12-2016, 07:33 PM
    Thread: stage 2 at higher milage
Post: RE: stage 2 at higher milage

I've not seen a low mileage 2.0 306 in my garage for years, they all handle it fine as long as you've maintained it well.
pro_steve DW10 HDi section 8 1,357 09-10-2016, 08:36 AM
    Thread: 1.6 hdi - pump and injector upgrade
Post: RE: 1.6 hdi - pump and injector upgrade

You need to use BDM100, take a look at this video here: https://www.youtube.com/watch?v=kynXjan7O0Q
pro_steve DW10 HDi section 14 5,094 26-09-2016, 08:54 AM
    Thread: 1.6 hdi - pump and injector upgrade
Post: RE: 1.6 hdi - pump and injector upgrade

I need the car really as it's a lot of work, or you can get a BDM tool and send me the ECU data, but then you'll need peugeot planet to log the car so that I can set the map up to suit your turbo. Wil...
pro_steve DW10 HDi section 14 5,094 15-09-2016, 10:30 AM
    Thread: 1.6 hdi - pump and injector upgrade
Post: RE: 1.6 hdi - pump and injector upgrade

Nope, mine was just the gt2052V turbo 3 bar map and the worlds biggest intercooler. Fuel pump on the 1.6 can provide a lot of fuel, and a lot of pressure so no need to upgrade it. The art is in the m...
pro_steve DW10 HDi section 14 5,094 08-09-2016, 07:31 PM
    Thread: Multiple HDI ECU error codes
Post: RE: Multiple HDI ECU error codes

We can send you an ecu and if it doesn't fix your problems happy to return less the postage. What codes are on your ecu? Send me an email remap@hdi-tuning.co.uk
pro_steve DW10 HDi section 16 1,680 28-06-2016, 09:51 PM
    Thread: Heavy smoke on startup... causes?
Post: RE: Heavy smoke on startup... causes?

If it's smokes white on cold start it's the injectors. Replace with low mileage injectors, don't use refurbished injectors they only last a few months and then you'll have problems again.
pro_steve DW10 HDi section 11 1,489 28-06-2016, 09:47 PM
    Thread: Injector and HP pump health (pp2k video)
Post: RE: Injector and HP pump health (pp2k video)

Is the egr blanked? And have you ran an injector leak off test? For the regulator I leave it to soak in thinners for 20 mins with the o rings removed. Carb cleaner is good too. You're welcome to bri...
pro_steve DW10 HDi section 19 2,063 28-06-2016, 09:45 PM
    Thread: Injector and HP pump health (pp2k video)
Post: RE: Injector and HP pump health (pp2k video)

Pump and MAF look ok to me. A good pump usually gets to a max of 44% duty cycle on a standard map, so it could be a tiny bit worn, but nothing to worry about unless it struggles once remapped. If it i...
pro_steve DW10 HDi section 19 2,063 27-06-2016, 01:28 PM
    Thread: HDi Re-map Advice & Reviews
Post: RE: HDi Re-map Advice & Reviews

That's from a 406? drop me an email on remap@hdi-tuning.co.uk
pro_steve DW10 HDi section 141 62,048 25-05-2016, 09:25 AM
    Thread: 2.2 hdi air box and maf
Post: RE: 2.2 hdi air box and maf

There are two different MAFs, the big one does have a different calibration. Some of the 2.2 engines come with the small MAF too. The small one can flow 570 Kg/hr, the other is 770Kg/hr
pro_steve DW10 HDi section 38 9,308 17-05-2016, 03:12 PM
    Thread: HDi Re-map Advice & Reviews
Post: RE: HDi Re-map Advice & Reviews

I'm in Bristol, and I've also got a colleague with a proper MPPS tool and diagnostics working for me up in North Wales (Cowyn Bay area) if that is closer?
pro_steve DW10 HDi section 141 62,048 17-05-2016, 02:47 PM
    Thread: Fitting a 16v head
Post: RE: Fitting a 16v head

Why not fit a 2.2 HDI engine instead?
pro_steve DW10 HDi section 7 1,240 22-04-2016, 12:56 PM
    Thread: Anyone on here doing remaps?
Post: RE: Anyone on here doing remaps?

There are two types, one unbolts, and one you need to cut it open and weld it. It's actually easier when you cut it open as you can pull the whole lump out rather than drilling it, but you'll need a ...
pro_steve DW10 HDi section 11 1,206 13-04-2016, 09:49 AM
    Thread: Finally got it plugged in
Post: RE: Finally got it plugged in

Forgot about this one, glad you got it running. Texton box on the 306s, BSI on everything else. It's the same thing, just the box which links the immobiliser to the engine ECU. Glad you got it runnin...
pro_steve DW10 HDi section 81 7,946 14-03-2016, 04:35 AM
    Thread: Anyone tried this fuel system cleaner?
Post: RE: Anyone tried this fuel system cleaner?

I actually worked for this project to get their engine running. The way they conducted the before and after tests were not in any way comparable, and the product is not good to put in your fuel system...
pro_steve DW10 HDi section 18 2,355 11-02-2016, 01:54 PM
    Thread: Stage 1+ map on stock car?
Post: RE: Stage 1+ map on stock car?

In all honesty it doesn't make a blind bit of difference to safety (all my maps are safe, and tested under extreme conditions), I only suggest it because you're not going to get the full 125 on the dy...
pro_steve DW10 HDi section 17 1,114 01-02-2016, 05:57 AM
    Thread: Stage 3 head lift?
Post: RE: Stage 3 head lift?

GT2052S is good for 180 BHP with 24-25 psi of boost on the 2.0 HDI 8V. Any more than that and you'll have back pressure problems and the lifters will start collapsing or you'll snap a rocker. I ran a...
pro_steve DW10 HDi section 33 4,629 23-01-2016, 02:13 AM
    Thread: FMIC hdi
Post: RE: FMIC hdi

It's only worth doing if you actually get a stage 2 map, otherwise you will just have the stage 1 power, maybe 1 to 2 bhp more thanks to the cooler charge.
pro_steve DW10 HDi section 5 714 13-12-2015, 12:19 PM