|
Search Results
|
| Post |
Author |
Forum |
Replies |
Views |
Posted
[asc]
|
| |
|
Thread: 306 2.0 HDI has been running fine without coolant for months????
Post: RE: 306 2.0 HDI has been running fine without cool...
| The DW10's don't run that hot under normal conditions anyway.
However, the engine temp sensor is located at the top of the engine, screwed into the thermostat housing so it won't give you proper read... |
|
FuST |
DW10 HDi section
|
3 |
2,660 |
07-11-2019, 08:29 AM |
| |
|
Thread: What turbo?
Post: RE: What turbo?
| I finally got around to taking a picture of the turbo to try and identify it.
I'm guessing this would be a KKK K03s then (see below picture)?
I'd like to be sure before ordering and taking everythin... |
|
FuST |
DW10 HDi section
|
4 |
3,202 |
16-04-2019, 09:33 AM |
| |
|
Thread: I'm having trouble pulling off.
Post: RE: I'm having trouble pulling off.
| I've got a similar speedo issue but only when it's cold and/or wet, but I agree that shouldn't cause (nearly)stalling the engine. (If anyone has a suggestion on what might cause the speedo issue, i'd ... |
|
FuST |
DW10 HDi section
|
13 |
6,403 |
19-12-2018, 02:38 PM |
| |
|
Thread: What turbo?
Post: RE: What turbo?
| So basically you won't know until you're able to dig it out of the engine bay. That's kind of..... inconvenient. :(
Edit: so what's the actual difference? Am I correct in assuming that the K03 has a ... |
|
FuST |
DW10 HDi section
|
4 |
3,202 |
08-11-2018, 09:42 PM |
| |
|
Thread: What turbo?
Post: What turbo?
| Hi all,
My HDi's turbo has a *slight* oil leak and I'm looking to replace the turbo cartridge/core.
However, I see some conflicting information online and in the Haynes manual as some say it's a g... |
|
FuST |
DW10 HDi section
|
4 |
3,202 |
07-11-2018, 10:30 PM |
| |
|
Thread: Climate control retrofit??
Post: Climate control retrofit??
| I have the opportunity to buy all necessary parts for cheap, does anyone know if this would be doable?
I already have aircon and from what I can tell it should be as simple as fitting a different hea... |
|
FuST |
Interior, Exterior, ICE
|
0 |
1,373 |
08-06-2018, 01:48 PM |
| |
|
Thread: HELP. Desperation, last resort before scrapping Project 16v.
Post: RE: HELP. Desperation, last resort before scrappin...
| Actually, louvring the bonnet might not be such a bad idea. Also, it looks awesome when done right |
|
FuST |
DW10 HDi section
|
57 |
14,733 |
26-04-2018, 05:54 PM |
| |
|
Thread: HELP. Desperation, last resort before scrapping Project 16v.
Post: RE: HELP. Desperation, last resort before scrappin...
| It all just sounds like a bad airflow problem to me.
While air getting in is very important, it also has to go somewhere. Are you sure there is enough room between the rad and the engine for good air... |
|
FuST |
DW10 HDi section
|
57 |
14,733 |
26-04-2018, 06:46 AM |
| |
|
Thread: HELP. Desperation, last resort before scrapping Project 16v.
Post: RE: HELP. Desperation, last resort before scrappin...
|
Quote:
--
30seconds later;
T80 M78 BH73 TH73
When cruising normally there isn't much of a temp change from top to bottom of the rad?
--
IIRC the (stock)thermostat on the 16v doesn't open below ~8... |
|
FuST |
DW10 HDi section
|
57 |
14,733 |
23-04-2018, 11:38 AM |
| |
|
Thread: 076 injector advice
Post: RE: 076 injector advice
| I've replaced them today and the ticking/rattle is pretty much gone. Only when accelerating at WOT it is slightly noticeable.
Then engine seems to run smoother overall, so job done. I'll keep the old ... |
|
FuST |
DW10 HDi section
|
16 |
5,930 |
31-03-2018, 07:45 PM |
| |
|
Thread: 076 injector advice
Post: RE: 076 injector advice
| Thanks, I'll make sure to line them up properly.
Already got myself a fresh set of fire seals so that's sorted. |
|
FuST |
DW10 HDi section
|
16 |
5,930 |
30-03-2018, 11:29 AM |
| |
|
Thread: 076 injector advice
Post: RE: 076 injector advice
| On final question before taking stuff apart.
The Haynes manual says to replace the high-pressure fuel pipes but I also see people reusing the old ones.
What would you guys advise? Use the old ones o... |
|
FuST |
DW10 HDi section
|
16 |
5,930 |
30-03-2018, 07:18 AM |
| |
|
Thread: 076 injector advice
Post: RE: 076 injector advice
| Thanks for the feedback everyone, I've taken the gamble and ordered one of the sets off ebay and also ordered a set of fire seals from a local parts store. I'll install them when they arrive and I'll ... |
|
FuST |
DW10 HDi section
|
16 |
5,930 |
26-03-2018, 09:44 PM |
| |
|
Thread: 076 injector advice
Post: 076 injector advice
| Because (at least) one of my injectors is making a lot of noise, the engine is making the "ticking" sound up to about 3000 RPM and I'm getting rubbish MPG I'm looking to replace my injectors with a go... |
|
FuST |
DW10 HDi section
|
16 |
5,930 |
23-03-2018, 08:09 AM |
| |
|
Thread: tacho glitch
Post: RE: tacho glitch
| The tacho is driven by the flywheel sensor (crankshaft position sensor). It feeds it's data to the ECU, which in turn sends a signal to the tacho.
Since there's no drop in engine RPM I'd rule that ou... |
|
FuST |
DW10 HDi section
|
3 |
1,818 |
07-03-2018, 03:49 PM |
| |
|
Thread: 306 XS 2.0 HDi died suddenly not starting anymore
Post: RE: 306 XS 2.0 HDi died suddenly not starting anym...
| The inertia switch reset (under the bonnet) is just a 2 pin switch, it can be tested with a multimeter or bypassed with a jumper wire (pins 1 & 3 on the plug I beleive, check the terminals on the swi... |
|
FuST |
DW10 HDi section
|
7 |
2,007 |
27-02-2018, 05:15 PM |
| |
|
Thread: HDi Starting issues
Post: RE: HDi Starting issues
| The new battery (maybe together with the new glow plug) seems to have solved the problem, cranking over much quicker now.
It's not starting as fast as when the engine is warm, but that is to be expec... |
|
FuST |
DW10 HDi section
|
9 |
2,555 |
27-02-2018, 07:45 AM |
| |
|
Thread: 306 XS 2.0 HDi died suddenly not starting anymore
Post: RE: 306 XS 2.0 HDi died suddenly not starting anym...
| The lp pump is controller by the ECU. It switches the brown or black relay behind the ECU on when the ignition is turned on and switches off after about 6 seconds. Also, fuse #35 (I beleive) under the... |
|
FuST |
DW10 HDi section
|
7 |
2,007 |
26-02-2018, 09:31 PM |
| |
|
Thread: 306 XS 2.0 HDi died suddenly not starting anymore
Post: RE: 306 XS 2.0 HDi died suddenly not starting anym...
| Just a couple of ideas, might not be useful (or coherent for that matter :P)
To my knowledge a loss of keycode should not interfere with the lp pump, the immobiliser merely shuts off the injectors.
I... |
|
FuST |
DW10 HDi section
|
7 |
2,007 |
26-02-2018, 09:04 PM |
| |
|
Thread: HDi Starting issues
Post: RE: HDi Starting issues
| @Mighty306: I'll do some of the tests described there, but I'm thinking battery for sure now (read on :))
@Poodle: I'll check to see if I can find any problems with the relay, cam and crank sensor se... |
|
FuST |
DW10 HDi section
|
9 |
2,555 |
26-02-2018, 07:58 AM |
| |
|
Thread: HDi Starting issues
Post: RE: HDi Starting issues
| Ok, I'm with you guys on the battery going bad, I know computers can do some weird stuff when underpowered.
The battery is at least 3.5 years old, it was the one fitted when I bought the car.
What... |
|
FuST |
DW10 HDi section
|
9 |
2,555 |
25-02-2018, 09:25 AM |
| |
|
Thread: HDi Starting issues
Post: HDi Starting issues
| Ok, so here goes my story (i'll try to keep it short)
Last year in the cold I noticed my trusty HDi wouldn't start quite as fast as it does in the summer. No concern there, I know batteries lose so... |
|
FuST |
DW10 HDi section
|
9 |
2,555 |
24-02-2018, 08:45 PM |
| |
|
Thread: Hello from The Netherlands
Post: Hello from The Netherlands
| Hello fellow 306-enthousiasts,
Not really a newbie, but new to these forums. I'm Dutch and not a native speaker, so excuse some of my grammatical errors ;)
I've been browsing these forums for quit... |
|
FuST |
Newbies
|
0 |
1,223 |
24-02-2018, 08:33 PM |
