+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: General (https://www.306oc.co.uk/forum/forumdisplay.php?fid=6)
+--- Forum: The Couch (https://www.306oc.co.uk/forum/forumdisplay.php?fid=7)
+--- Thread: Mikalor Style Clamps (/showthread.php?tid=9784)
Mikalor Style Clamps - Just Sean - 14-01-2013
As title, where from?
I cant use paypal atm as theyve blocked my account pending verification of my address.
RE: Mikalor Style Clamps - Midnightclub - 14-01-2013
B and q? If not then eBay.. You can still Just pay by card instead of PayPal
RE: Mikalor Style Clamps - Just Sean - 14-01-2013
bnq ... really?
Dont look very strong!
RE: Mikalor Style Clamps - Midnightclub - 14-01-2013
Can't see any reason why they wouldn't? Told you the leak was off the turbo
RE: Mikalor Style Clamps - darrenjlobb - 14-01-2013
doubt b n q will have them....
My local hydrolic fitting place sells them...you maybe have something similar near by?
That said, I acaully personally hate the genuine mikalor ones, I dont like the style with bolt and built in nut, the ones with built in bolt and a nut (ebay chinease copies) work far better, and the thinner stainless band flexs to fit the pipe much better, not often id say it, but i find the cheap copies much better than the genuine ones!
RE: Mikalor Style Clamps - Just Sean - 14-01-2013
Intresting! Might get some cheap ones then. Will try ebay if i can pay via debit card
Are these cheap enough darren?
http://www.ebay.co.uk/itm/Jubilee-Worm-Drive-Type-Clips-Hose-Clamp-Zinc-White-Plated-Rounded-Edges-Clamps-/170828705907?pt=UK_Sporting_Goods_Windsurfing_CV&var=&hash=item27c62f3073
RE: Mikalor Style Clamps - Just Sean - 14-01-2013
Need paypal for those ones anyway! Grrr
RE: Mikalor Style Clamps - Harky - 14-01-2013
Pretty sure those are just your normal jubilee clamps, which slip when you try to tighten them too tight... You might have to splash out a wee bit more!
RE: Mikalor Style Clamps - swampy - 14-01-2013
Yep those are jubilee clips, for boost you want Mikalor or copies there of
RE: Mikalor Style Clamps - HDIkyle - 14-01-2013
Use ASH you posted in another thread, I get mine from there called T bolt clamps
RE: Mikalor Style Clamps - Just Sean - 14-01-2013
http://www.tom-parker.co.uk/products_subgroups.php?v=1&recall=true&products_categories=13&level2=237&products_groups=4164&products_subgroups=4165B
Got these. 40 - 43mm. Should be right. Its for the turbo 90degree elbow
RE: Mikalor Style Clamps - Midnightclub - 14-01-2013
perfec
RE: Mikalor Style Clamps - darrenjlobb - 14-01-2013
U need the ones with cranked bolts and thin retainer plate, or else they have to be the exact size / never work right / will drive you insane if your silicon is thicker on some than other.
RE: Mikalor Style Clamps - Toms306 - 14-01-2013
They are such a pita to size properly, bought 3 before I got one the right size because they have so little adjustment! I also used the ASH ones though...
RE: Mikalor Style Clamps - Just Sean - 14-01-2013
Aslong as i can get it nice and tight it shouldnt leak anyway. The hose is 38mm diameter and the inlet on the turbo is 41mm... It might be leaking at the 90degree to c5 lower pipe end as iirc theyre both 41mm... IF 40mm is too big then its only a quid or so for the size smaller.
RE: Mikalor Style Clamps - darrenjlobb - 14-01-2013
(14-01-2013, 01:17 PM)Toms306 Wrote: They are such a pita to size properly, bought 3 before I got one the right size because they have so little adjustment! I also used the ASH ones though...
The problem is you have to alow for silicon as well...which makes it confusing, say you have a 63mm pipe, a 63mm clamp will be a **** to get on once silicon is in situe, or at least it is if you use quality thick silicon anyway..
RE: Mikalor Style Clamps - Toms306 - 14-01-2013
Yeah I realised that after the first one....2nd one was too big though instead!
