+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Cars (https://www.306oc.co.uk/forum/forumdisplay.php?fid=21)
+--- Thread: Black Ph1 11mm t25 (/showthread.php?tid=9465)
Pages:
1
2
Black Ph1 11mm t25 - Olly_p - 03-01-2013
It has come now to sell my 306, I have spent a lot of time and money on her. This car is not perfect by all means.
Bad points first.
Lacquer on roof has almost gone
Carpet isn't great the last owner had split white paint just behind the drivers seat i have tried to clean it isn't to bad now.
Passenger CV boot slightly leaking
Passenger door card ain't great
Passenger electric window switch doesn't work (window still works with drivers side switch.
Key has no bits in it for the remote central locking.
Has a fair few miles 200k
Good points
Engine was rebuilt 2000miles ago this included
Honed cylinders
New big end bearings
New piston rings
Water pump
1.7mm mls head gasket
Thermostat
Cam belt
Alternator belt
T25 turbo
2 1/2 stainless straight through to rear box 4'outlet
MBC (just had wastage welded up today)
11mm fuel pump with LDA ground and gov has been shimmed up by about 4-5mm could do with going more as fuel still gets cut off higher up the rev range
Front mount intercooler with xantia inlet manifold and took all the egr bits out of it. Relocated washer bottle using a surbaru I/C washer bottle.
Twin slimline fans
Oil catch tank
Clutch has done 3000 miles
Gti 6 interior
17inch wheels, with good tread all round
Been lowered about 60mm
Had oil change today as well as fuel filter change.
8 months mot
4 months tax
£1050 ono
![[Image: 2012-06-28211137.jpg]](http://i2.photobucket.com/albums/y43/olly3000/2012-06-28211137.jpg)
![[Image: IMAG0173-1.jpg]](http://i2.photobucket.com/albums/y43/olly3000/IMAG0173-1.jpg)
![[Image: IMAG0162.jpg]](http://i2.photobucket.com/albums/y43/olly3000/IMAG0162.jpg)
![[Image: 2012-06-26193241.jpg]](http://i2.photobucket.com/albums/y43/olly3000/2012-06-26193241.jpg)
![[Image: IMAG0002-2.jpg]](http://i2.photobucket.com/albums/y43/olly3000/IMAG0002-2.jpg)
![[Image: IMAG0005-1.jpg]](http://i2.photobucket.com/albums/y43/olly3000/IMAG0005-1.jpg)
![[Image: IMAG0001-1.jpg]](http://i2.photobucket.com/albums/y43/olly3000/IMAG0001-1.jpg)
Car is located Salisbury Wilts
RE: Black Ph1 11mm t25 - Mattcheese31 - 03-01-2013
random question . . what did you do with the washer bottle? . . . looks a good idea for running fmic pipes . .glwts . .
RE: Black Ph1 11mm t25 - Olly_p - 03-01-2013
New washer bottle is just behind drivers head light
RE: Black Ph1 11mm t25 - Ed Doe - 03-01-2013
you can see it in one of the photos Matt you muggins 
I hate to say it bud, but £1000 is optimistic for a Dtub, especially on that mileage. It's horrible, but unfortunately, these cars just aren't worth the sum of their parts to all but a few people these days...
RE: Black Ph1 11mm t25 - Mattcheese31 - 03-01-2013
(03-01-2013, 04:17 PM)Ed Doe Wrote:
I hate to say it bud, but £1000 is optimistic for a Dtub, especially on that mileage. It's horrible, but unfortunately, these cars just aren't worth the sum of their parts to all but a few people these days...
oh aye . .
. . . ah well, at least i've sorted all my front end knocking out . .:pi think it's worth about a grand, based on a couple of recent sales .
RE: Black Ph1 11mm t25 - Ed Doe - 03-01-2013
(03-01-2013, 04:35 PM)Mattcheese31 Wrote: oh aye . .
i think it's worth about a grand, based on a couple of recent sales .
Bahaaha, FYC!
RE: Black Ph1 11mm t25 - Ben - 03-01-2013
Easily worth a grand, the amount of work and money that would have to go into it for a rebuilt engine, t25, 11mm pump, front mount, exhaust and wheels. Saved someone a lot of bother.
Re: RE: Black Ph1 11mm t25 - Dan! - 03-01-2013
(03-01-2013, 04:17 PM)Ed Doe Wrote: I hate to say it bud, but £1000 is optimistic for a Dtub
How much did you sell your dturbo for Ed? :-)
RE: Black Ph1 11mm t25 - Olly_p - 03-01-2013
I'm open to sensible offers, but I've put a lot of time into it. I know the mileage is high but engine etc is all new well 3000 miles old.
RE: Black Ph1 11mm t25 - Olly_p - 03-01-2013
Forgot to add it has a oil catch tank.
RE: Black Ph1 11mm t25 - cwspellowe - 03-01-2013
In parts yeah it may be worth that much, but at the end of the day it has a lime green bonnet and it won't be to many peoples tastes. Add in that black ph1's aren't the most common colour and people would be put off buying it with a view to fitting a black one.
Engine looks nice and clean, always a plus point, but engines are cheap these days. Reliability wise great but it's still just an XUD9TE. Nothing fancy.
Hate to say it but I agree the price is optimistic.
Fair play though, and GLWTS.
Oh and Matt, all the cool kids run their FMIC pipes that way. Where've you been all these years?
RE: Black Ph1 11mm t25 - Ed Doe - 03-01-2013
(03-01-2013, 05:27 PM)Dan! Wrote:(03-01-2013, 04:17 PM)Ed Doe Wrote: I hate to say it bud, but £1000 is optimistic for a Dtub
How much did you sell your dturbo for Ed? :-)
I'll leave that for Phil to divulge, but it had almost hald the mileage, and this was 3 years ago, when (I thought) these were worth a little more!
RE: Black Ph1 11mm t25 - 4WayDiablo - 03-01-2013
(03-01-2013, 06:55 PM)Ed Doe Wrote:(03-01-2013, 05:27 PM)Dan! Wrote:(03-01-2013, 04:17 PM)Ed Doe Wrote: I hate to say it bud, but £1000 is optimistic for a Dtub
How much did you sell your dturbo for Ed? :-)
I'll leave that for Phil to divulge, but it had almost hald the mileage, and this was 3 years ago, when (I thought) these were worth a little more!
950 and was 118k miles?
Spec was 11mm head with internal mods -40-50 mm all round on '6shocks. Black masks and power flow ss turbo back. (Plus a few other lil bits)
I don't mind saying that on here and I guess ed doesnt
Was October 2010 though? So 2 and a bit
RE: Black Ph1 11mm t25 - Ed Doe - 03-01-2013
It was 112k IIRC? But yeah, it was hdi brakes, slimline fan not wired in, fmic not plumbed in but present including prettymuch all required pipework, induction, new top engine mount, t2, boost gauge, 11mm pump with heavily shimmed gov, powerflow exhaust turbo-back with no cat, rear beam wtih gti6 shocks, iirc stock front shocks with -40mm spax springs, hdi brakes up front, black masks, and a ph1 interior too, with the deeper bolsters
RE: Black Ph1 11mm t25 - Olly_p - 03-01-2013
So you lot recon price is too high for the mileage?
RE: Black Ph1 11mm t25 - cwspellowe - 03-01-2013
Olly it's your car so advertise it at whatever you want, just be prepared to drop your price when the offers come in. It's an OK price as a starting point but make sure you don't turn away sensible offers.
RE: Black Ph1 11mm t25 - Olly_p - 03-01-2013
That's the idea I am open to decent offers I know end of the day it is an old car.....
RE: Black Ph1 11mm t25 - Birk - 03-01-2013
Just leave it as it is, worth a shot, you will always get knocked down.
RE: Black Ph1 11mm t25 - Ben - 04-01-2013
If I were you I would try and get a standard bonnet back on. I'd also advertise it places like the dturbo owners facebook page or whatever it is, and maybe eBay if you hear nothing after a few weeks.
RE: Black Ph1 11mm t25 - Olly_p - 04-01-2013
Good shout thanks!
RE: Black Ph1 11mm t25 - DaveW - 04-01-2013
As stated get a black bonnet or matt black it, car looks nice otherwise
RE: Black Ph1 11mm t25 - Dum-Dum - 04-01-2013
Advertise it on jon44 and some of the irish forums mate. Youll happily get over a grand for it then.
RE: Black Ph1 11mm t25 - pugtk - 04-01-2013
if that was on j44 for a grand,you'd have 5-10 lads landing out at your house with cash..haha
RE: Black Ph1 11mm t25 - Jaymes306 - 05-01-2013
Alryt bud, Intrested in the dturbo, Im a local lad you may recognise the hdi in my photo. If your willing to negotiate on price then ill have it, my names james and numbers 07717162637. cheers
RE: Black Ph1 11mm t25 - sam - 05-01-2013
Go for it james
RE: Black Ph1 11mm t25 - con67 - 05-01-2013
(04-01-2013, 07:58 PM)pugtk Wrote: if that was on j44 for a grand,you'd have 5-10 lads landing out at your house with cash..hahaI'm probably gona go to England to get my next one tbh the price here is insane I thought ollys' was a bargain before I read the thread lol
RE: Black Ph1 11mm t25 - Ruan - 07-01-2013
306s are only worth so little because everyone is so obsessed with Mk4 shitboxes and everyone has this "french shit" and "chav" thing in their head...
They unfortunately are worth little anymore... However I've a funny feeling 306s are going to be coming back into demand when their bad image has gone...
RE: Black Ph1 11mm t25 - Ed Doe - 07-01-2013
(07-01-2013, 12:09 AM)Ruan Wrote: However I've a funny feeling 306s are going to be coming back into demand when their bad image has gone...
^This.
It'll be a case of 'the ones that don't have scaffolding and buckets in them will be worth something...'
RE: Black Ph1 11mm t25 - sam - 08-01-2013
(07-01-2013, 09:41 AM)Ed Doe Wrote:(07-01-2013, 12:09 AM)Ruan Wrote: However I've a funny feeling 306s are going to be coming back into demand when their bad image has gone...
^This.
It'll be a case of 'the ones that don't have scaffolding and buckets in them will be worth something...'
better than a tapping 6
Black Ph1 11mm t25 - RePT - 09-01-2013
Mhmm. Theres something about cars that I would rather buy and have the work done myself, instead of
Buying a ready modified car...
I would suggest you break it if you have time/space!