smoothed grill - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26) +--- Forum: Misc & Wanted (https://www.306oc.co.uk/forum/forumdisplay.php?fid=14) +--- Thread: smoothed grill (/showthread.php?tid=8965)

smoothed grill - dturbo ash - 15-12-2012 smoothed grill for a ph3 RE: smoothed grill - Toby - 15-12-2012 If you google image: "smooth grill meme", one finds quite funny results. RE: smoothed grill - Oil-burner - 15-12-2012 Do it yourself pal, really is simple. Get yourself 1 roll I masking tape 1 fibreglass matting kit (£10 halfords) Some filler Primer Paint Lacquer Mine took about an hour if that! RE: smoothed grill - dturbo ash - 16-12-2012 did you cut that recess out where badge goes? smoothed grill - Jukie88 - 16-12-2012 I did mine impatiently and stuck abit of wore mesh in the recess and filled over the top with fibreglass it weighs a tonne lol gunna strip it at some point and do it again with a piece of my othe grill RE: smoothed grill - Oil-burner - 16-12-2012 Yeah mate cut it out like so Rough up the back with the dremel Masking tape over the painted side Turn upside down Fibreglass the shit out of it Rip off masking tape Sand down so all the fibreglass sits lower than the painted surface Fill with filler Sand smooth Primer Paint Lacquer Job done RE: smoothed grill - samass - 16-12-2012 you got a pic of the back of yours Si? RE: smoothed grill - Oil-burner - 16-12-2012 I can get one next time I'm at my mums. I intended doing a guide on it but my iphone is shite and keeps dying! RE: smoothed grill - samass - 16-12-2012 Coolio! One I've got has just been filled, weighs about 4.73 tons RE: smoothed grill - Oil-burner - 16-12-2012 Lol, don't think you can really tell any difference with mine tbh. Put a pic up RE: smoothed grill - samass - 16-12-2012 needs some more work, i've sprayed a guide coat onto it, it was in primer, but there are a few lumps and bumps ill get some pics up when i can be arsed lol RE: smoothed grill - Oil-burner - 16-12-2012 You'll smooth them out easy enough, use a block to make sure you get the angles right and you'll be fine. RE: smoothed grill - samass - 16-12-2012 yeah that was the plan, doing the exact same thing on the rest of the car RE: smoothed grill - Oil-burner - 16-12-2012 Haha rather you than me, Feckin hate prepping up! RE: smoothed grill - samass - 16-12-2012 actually really enjoying it! for now anyway, i've only done half the rear quarter with 240 grit lolz RE: smoothed grill - Oil-burner - 16-12-2012 Haha yeah that'll wear off pretty quick! To be fair I still love doing it but is slow tedious work. RE: smoothed grill - samass - 16-12-2012 true that. and i stil have to plug and fill the aerial hole, and the rub strip holes. and then find and smooth a bonnet! my right arm is gunna be HENCH RE: smoothed grill - Oil-burner - 16-12-2012 Bonnets are easy enough, you need to get yourself a small detail sander to get the thickness of it off, makes it a lot easier! I'd come give you a hand but its a bit of a trek RE: smoothed grill - samass - 16-12-2012 Ah noted, I've a cheapy one kicking about! nonsense, not that far, you drive an hdi! RE: smoothed grill - Oil-burner - 16-12-2012 I drive a hdi because in poor! Lol