+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: anyone used or using this type of TDO4 (/showthread.php?tid=8598)
anyone used or using this type of TDO4 - karl1989 - 04-12-2012
hi guys just purchased a TDO4 and was wondering if anyone is using or used one. what is the power like ect. sorry for poor pictures quality
![[Image: Photo0584.jpg]](http://i1104.photobucket.com/albums/h329/K4RL1989/Photo0584.jpg)
![[Image: Photo0585.jpg]](http://i1104.photobucket.com/albums/h329/K4RL1989/Photo0585.jpg)
![[Image: Photo0586.jpg]](http://i1104.photobucket.com/albums/h329/K4RL1989/Photo0586.jpg)
![[Image: Photo0588.jpg]](http://i1104.photobucket.com/albums/h329/K4RL1989/Photo0588.jpg)
RE: anyone used or using this type of TDO4 - Anton - 04-12-2012
Oh dear.
RE: anyone used or using this type of TDO4 - karl1989 - 04-12-2012
what?
RE: anyone used or using this type of TDO4 - CJ_Derv - 04-12-2012
Dont think anyones run one of them because of the inlet tbh
RE: anyone used or using this type of TDO4 - Ben - 04-12-2012
That inlet would make it very awkward to mount, make sure you know how your going to fit it and pipe it before you go ahead.
RE: anyone used or using this type of TDO4 - Ruan - 04-12-2012
Yeah, there's a reason everyone gets the front entry turbos...
RE: anyone used or using this type of TDO4 - HDIkyle - 04-12-2012
Nothing a grinder won't sort
RE: anyone used or using this type of TDO4 - karl1989 - 04-12-2012
mmmm may sell it
(04-12-2012, 09:20 PM)HDIkyle Wrote: Nothing a grinder won't sort
could do. ill wait for somebody to come along and see what they say
RE: anyone used or using this type of TDO4 - David - 04-12-2012
Who did you buy it off?
RE: anyone used or using this type of TDO4 - karl1989 - 04-12-2012
someone of the forum
RE: anyone used or using this type of TDO4 - Piggy - 04-12-2012
Its the subaru one with the side entry...bitch to fit as it is
RE: anyone used or using this type of TDO4 - karl1989 - 04-12-2012
not sure what im guna do with it yet. will it hit the bulkhead?
RE: anyone used or using this type of TDO4 - Piggy - 04-12-2012
Possibly...more of an issue is the inlet pointing 90degrees the wrong way!
Pics before purchase ftw!
RE: anyone used or using this type of TDO4 - Tom - 04-12-2012
You could put a seive over the end and live dangerously
RE: anyone used or using this type of TDO4 - HDIkyle - 04-12-2012
Can't you just get a housing off a f*cked turbo and pop that on while its been clocked?
RE: anyone used or using this type of TDO4 - londondan86 - 04-12-2012
(04-12-2012, 10:51 PM)HDIkyle Wrote: Can't you just get a housing off a f*cked turbo and pop that on while its been clocked?
If the cartridge is in good condition then this is what I would do, otherwise just stick it on ebay and except you may make a loss on it
RE: anyone used or using this type of TDO4 - HDIkyle - 05-12-2012
Just battery mount it!
(04-12-2012, 10:44 PM)Tom Wrote: You could put a seive over the end and live dangerouslyI did mention this myself, anyone running like this as I know a lot run no filter so atleast big stuff won't get in
RE: anyone used or using this type of TDO4 - CJ_Derv - 05-12-2012
I dont run a filter on mine, the only issue i can see is the inlet would be pointing towards the bulkhead, IMO may be more likely to pick something up but would be tight against bulkhead too is say,
I dont know how grinding it back would go as youd probably be best grinding halfway through the 90
And as for swapping the inlet housing it has to have the same wheel etc
RE: anyone used or using this type of TDO4 - karl1989 - 05-12-2012
(04-12-2012, 10:55 PM)londondan86 Wrote:i wont make a loss on it(04-12-2012, 10:51 PM)HDIkyle Wrote: Can't you just get a housing off a f*cked turbo and pop that on while its been clocked?
If the cartridge is in good condition then this is what I would do, otherwise just stick it on ebay and except you may make a loss on it
. cant be botherd gear box mounting.(05-12-2012, 10:21 AM)CJ_Derv Wrote: I dont run a filter on mine, the only issue i can see is the inlet would be pointing towards the bulkhead, IMO may be more likely to pick something up but would be tight against bulkhead too is say,
I dont know how grinding it back would go as youd probably be best grinding halfway through the 90
And as for swapping the inlet housing it has to have the same wheel etc
im thinking of grinding it down abit just so it misses bulkhead if it touches. might get some strong mesh with little holes so it wont suck anything in
RE: anyone used or using this type of TDO4 - Tom - 05-12-2012
It doesnt stick out any further than the rest so i wouldnt of thought it would catch :p