+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: The Racetractor. The End. (/showthread.php?tid=8415)
Pages:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
RE: 2.1GTd...likes to break stuff - ash23 - 10-09-2014
ahhh thats a shitter about the turbo
hows the turbo mounted? is it slightly tilted back ? on the hot side?
RE: 2.1GTd...likes to break stuff - Piggy - 10-09-2014
Turbo has made rough love to itself.
Shaft play and oil in compressor and turbine.
Big fail
RE: 2.1GTd...likes to break stuff - Poodle - 11-09-2014
(09-09-2014, 07:56 PM)Dum-Dum Wrote: Sorry
TBF I have had alot of practice of lashing stuff together so am kinda an expert in doing it to a level where it works, like a hugely over engineered lash up.
I've seen the plenty of experience, where's the bit where it works? :p
Shitter about the turbo Piggy, any ideas what's caused it?
RE: 2.1GTd...likes to break stuff - Piggy - 11-09-2014
No idea.
Which is worying.
Can anyone confirm for my worries that this restrictor.is ok?...
Fuzzy pic:
[attachment=18911]
RE: 2.1GTd...likes to break stuff - mikey b - 11-09-2014
(11-09-2014, 07:22 AM)Piggy Wrote: No idea.
Which is worying.
Can anyone confirm for my worries that this restrictor.is ok?...
Fuzzy pic:
Is it a ball bearing turbo think I can rember somet about the later garret turbos needing a 1 mm restrictor or somet like that the garret website has some pretty usful stuff on it
RE: 2.1GTd...likes to break stuff - Piggy - 11-09-2014
No journal on the 2056. The 2260 has ball bearing.
You can see in that pic a restrictor in the oil way?!
RE: 2.1GTd...likes to break stuff - ash23 - 11-09-2014
if thats the garrett restrictor and the same as the new turbo it should be fine? only other thing is see what oil pressure the car the turbo came from is and see if yours is pushing to much pressure? i may be talking crap tho
RE: 2.1GTd...likes to break stuff - Piggy - 11-09-2014
From the gauges, I defo dont have too much pressure
RE: 2.1GTd...likes to break stuff - mikey b - 11-09-2014
(11-09-2014, 07:59 AM)Piggy Wrote: From the gauges, I defo dont have too much pressure
Yep I see it in the pic did your old turbo have one if not do you have enought oil pressure to get through the restrictor just a thort or try bodging up a guage on the turbo feed to see what pressure you have at it just trying to think of possible causes
RE: 2.1GTd...likes to break stuff - Piggy - 11-09-2014
Same on both turbos.
Only thing I can think of is compresser stall a couple of times when out on first run and setting up
RE: 2.1GTd...likes to break stuff - mikey b - 11-09-2014
(11-09-2014, 08:13 AM)Piggy Wrote: Same on both turbos.
Only thing I can think of is compresser stall a couple of times when out on first run and setting up
Bit odd cus mine compressor stalls lots if you let it and so does mr fish 206 and they both running fine but when I got my first 2256v it was fine had engine running out the car just to check and it started pissing out oil think it's luck of the draw with secon hand turbos bit of a bugger hope your new one last longer
RE: 2.1GTd...likes to break stuff - Piggy - 11-09-2014
Yeah me too.
I may rebuild the spare or flog it for spares/repair and save up for a new/very low mileage unit
RE: 2.1GTd...likes to break stuff - Seb_Ryan - 11-09-2014
Piggy cant you just get a new chra? Theres ones on ebay for my alfa which has just eaten itself for about 150 brand new.. im pretty sure it's a 22** on that so should be able to get 1..
RE: 2.1GTd...likes to break stuff - Piggy - 11-09-2014
Cant find any for less than 200 for the GTB.
RE: 2.1GTd...likes to break stuff - Seb_Ryan - 11-09-2014
Surely thats better than spending 100 or so on a turbo every few months?
RE: 2.1GTd...likes to break stuff - Ruan - 11-09-2014
(11-09-2014, 10:36 AM)Seb_Ryan Wrote: Piggy cant you just get a new chra? Theres ones on ebay for my alfa which has just eaten itself for about 150 brand new.. im pretty sure it's a 22** on that so should be able to get 1..
That's not a genuine item...
Garrett DO NOT supply any parts for Variable Nozzle turbochargers due to their inherent complexity and how they are set up... If they did I can quite assure you that a GTBxxyyVLK chra will NOT be £150 lol! Maybe stick another 0 on the end of that and you'll get close...
These are NOT cheapy units.
RE: 2.1GTd...likes to break stuff - Piggy - 11-09-2014
Exactly.
I have emailed garrett direct regarding new bearings and seals...yet to get a reply
RE: 2.1GTd...likes to break stuff - zx_volcane - 11-09-2014
Do these turbos have a rep for being strong?
RE: 2.1GTd...likes to break stuff - procta - 11-09-2014
what a f*cking nightmare! are you going to put a upgraded one on? bare this in mind I am not clued up on turbos.
RE: 2.1GTd...likes to break stuff - Toms306 - 11-09-2014
(11-09-2014, 01:11 PM)Piggy Wrote: Exactly.
I have emailed garrett direct regarding new bearings and seals...yet to get a reply
They'll more than likely tell you to feck off lol...
I must admit, I didn't realise quite how expensive decent turbo parts are new! Makes the ~£300 I paid for a recon GT1749v seem cheap now, obviously not gen parts used in that though lol. That was a blown exhaust oil seal as well.
RE: 2.1GTd...likes to break stuff - Piggy - 11-09-2014
(11-09-2014, 03:04 PM)procta Wrote: what a f*cking nightmare! are you going to put a upgraded one on? bare this in mind I am not clued up on turbos.
No need man. 1bar of boost by 1500rpm is plenty. Plus it will flow to 250bhp if I wanted it.
Its perfect for all my wants and needs. I'll just find a mint low mileage unit at some point.
Anyway....
New(ish) CHRA is on. I swapped housings as the new ones were nasty cruddy.
All plumbed in with more brackets, improved welds and a better actuator bracket aswell. Not quite finished as I ran out of welding wire...sums up my week!!
Fire it up tomorrow and hunt down the arduino fault once and for all.
RE: 2.1GTd...likes to break stuff - padge - 11-09-2014
glad its getting there.
RE: 2.1GTd...likes to break stuff - Piggy - 12-09-2014
I think this may be the end.
New turbo is buggered.
Think bottom end is knocking too.
Re: RE: 2.1GTd...likes to break stuff - Seb_Ryan - 12-09-2014
(12-09-2014, 03:51 PM)Piggy Wrote: I think this may be the end.
New turbo is buggered.
Think bottom end is knocking too.
Maybe oil starvation?
RE: 2.1GTd...likes to break stuff - Piggy - 12-09-2014
Duno.
Not sure.
Not sure I care.
Just totting up what its worth in parts.
RE: 2.1GTd...likes to break stuff - 1616six - 12-09-2014
Private video is private.
RE: 2.1GTd...likes to break stuff - Piggy - 12-09-2014
Sorry....
Any better?
RE: 2.1GTd...likes to break stuff - 1616six - 12-09-2014
Doesnt sound right, doesnt sound terminal IMO though?
RE: 2.1GTd...likes to break stuff - Piggy - 12-09-2014
Sounds pretty termimal in person
RE: 2.1GTd...likes to break stuff - Toms306 - 12-09-2014
Its f*cked.
Just plug PP2K in to see whats up...oh wait...
Seriously though, it doesn't seem that bad on the video, just looks like its missing, not really good enough for an online diagnosis.
