+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: Early non-cat downpipe ID (/showthread.php?tid=7838)
Early non-cat downpipe ID - cwspellowe - 10-11-2012
Anyone know it off the top of the head? Going to cut the flange off and sleeve fit a flexi onto it, need to know the size though and can't get it off the car at the mo.
RE: Early non-cat downpipe ID - samass - 10-11-2012
2" irrc
RE: Early non-cat downpipe ID - cwspellowe - 10-11-2012
Did you put your cock in it and measure the gap aye?
RE: Early non-cat downpipe ID - Danny2009 - 10-11-2012
I've got one off the car what you need mate the internal diameter of the pipe or the external diameter?
RE: Early non-cat downpipe ID - samass - 10-11-2012
(10-11-2012, 08:24 PM)cwspellowe Wrote: Did you put your cock in it and measure the gap aye?
dont be silly, i'd need something larger than my cock to give an easier comparison
RE: Early non-cat downpipe ID - Chris - 10-11-2012
54mm or 2 1/8" normally.
RE: Early non-cat downpipe ID - cwspellowe - 10-11-2012
Like a 50p?
Danny, internal, external, whatever, just need one of the sizes so I can get a sleeve fitted to it
RE: Early non-cat downpipe ID - samass - 10-11-2012
yep, that'd double the reference size
RE: Early non-cat downpipe ID - Danny2009 - 10-11-2012
As chris says 54 mm just been and measured pal
RE: Early non-cat downpipe ID - cwspellowe - 10-11-2012
Merci beaucoup sir
RE: Early non-cat downpipe ID - Danny2009 - 10-11-2012
No problem mate
RE: Early non-cat downpipe ID - samass - 10-11-2012
meh, i was close...
RE: Early non-cat downpipe ID - cwspellowe - 10-11-2012
...to touching the sides?
Giggidy
RE: Early non-cat downpipe ID - samass - 10-11-2012
noooo, never THAT close!
RE: Early non-cat downpipe ID - Chris - 10-11-2012
54mm is the external diamiter btw
RE: Early non-cat downpipe ID - cwspellowe - 10-11-2012
Cheers man, that's all I needed to know.
Can order the parts for the elbow/top of downpipe now