+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: Oil Pressure & Temp Gauge (/showthread.php?tid=7667)
Oil Pressure & Temp Gauge - Mike - 05-11-2012
Yo everyone!
just brought myself a set of gauges, and i am unsure of..
Oil pressure fitting thread size & location
Oil temp fitting size & location
i have a ph1 dturbo, with no oil temp on the clocks (it is oil temp aint it
), <- if correct, im thinking oil temp, shouldnt be to hard? As there should hopefully but connectors/plugs somewhere on the engine to wire the gauge too?
Anyway, thanks in advanced for all your advice!
Mike
RE: Oil Pressure & Temp Gauge - samass - 05-11-2012
You'll need a sandwich plate to go between the oil filter and the block. About 15 quid on eBay
RE: Oil Pressure & Temp Gauge - HDIkyle - 05-11-2012
My oil pressure guage goes straight into the engines standard oil pressure senders hole. As it has a very large fitting, then oil temp is on a sarny plate as said
RE: Oil Pressure & Temp Gauge - Mike - 11-11-2012
Thanks guys!
Oil Pressure & Temp Gauge - Mike - 14-01-2013
.....Ignore my first top post.....
Coming to fit my gauges now, i still havent got much of a clue where to get the signal for the oil pressure and temp :/
Any help would be much appreciated!
Mike