+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25)
+--- Thread: Breaking - Bianca GTi6 (/showthread.php?tid=7481)
Pages:
1
2
Breaking - Bianca GTi6 - Dum-Dum - 28-10-2012
Breaking my 6 as ive crashed it.
Front end is going on my new car so isnt for sale. steering wheel is probably the same unless i get a very good offer.
Any shinys are less than 3 months old and the car is on 123k
GMax -60mm lowering kit with brand new pug top mounts £150
GTi6 engine with ECU loom and manifolds £250 - SOLD as bare engine
GTi6 gear box £100
406 Brembos with mintex pads, braided lined and G88 discs £200
Team Dynamics gold PR1.2s with 205/45R16 falkens all round, tyres only 3 months old. Straight fit ET15 Also come with stud and nut conversion £300
All the meyle stuff - SOLD
GTi rear beam lowered 60mm still straight, not cambered £100
Rad with 16" slim line fan £25
Brushed ally dash trim £25
Clocks/Dialls on 125k £10
Sparco bucket on home made sub frame (and ill throw in a DTurbo passenger seat) £50
Pair of black 3 point harnesses £20 - SOLD
Bosch Lambada, brand new with box (well its done 400 miles) £40 - SOLD
De-Cat £60 - Prov SOLD
Peco back box £20
Blue flame (probably) single box system £70
carbon fiber ABS Door cards £20 - SOLD
Polycarb windows (if i can get them off) £15 - SOLD
Oh and 306 steering boss, BNIB £15
306 GTi6 block £20 and thats getting scrapped with the shall if nobody claims it.
GTi6 inlet manifold with injectors and fuel rail and air filter £30
GTi6 Exhaust manifold £10
GTi6 short drive shaft £5
16mm N/S hub £5
GTi6 starter motor £10
GTi6 alternator £10
GTi6 ECU and full engine wiring loom (unplugged from N/S chassis leg) £15
Anything else just ask.
RE: Breaking - Bianca GTi6 - spike2002 - 28-10-2012
306 steering boss, BNIB £15 what make? and how much posted?
RE: Breaking - Bianca GTi6 - Dum-Dum - 28-10-2012
(28-10-2012, 11:38 PM)R45_ODV Wrote: 306 steering boss, BNIB £15 what make? and how much posted?Cheap ebay mate, £20 posted mate if your paying paypal.
RE: Breaking - Bianca GTi6 - Matt - 28-10-2012
May have that lamda of you.
Wings for sale or it that included in the front end stuff your keeping?
RE: Breaking - Bianca GTi6 - Dum-Dum - 28-10-2012
(28-10-2012, 11:42 PM)Matt Wrote: May have that lamda of you.
Wings for sale or it that included in the front end stuff your keeping?
As its you ill do it posted for you at that price.
Wings arent for sale mate sorry.
RE: Breaking - Bianca GTi6 - Matt - 28-10-2012
Ahhh okay mate, let me check my funds tomorrow
Breaking - Bianca GTi6 - Jonny b - 29-10-2012
Wooooaaah wtf happened dude? You ok? You got a new one lined up?
RE: Breaking - Bianca GTi6 - Dum-Dum - 29-10-2012
(29-10-2012, 12:02 AM)Jonny b Wrote: Wooooaaah wtf happened dude? You ok? You got a new one lined up?
Slightly wrote off my baby, im OK, sore head from hitting the metal frame right at the top of the seat, new car lined up.
Hopefully have your engine mount off tomorrow or tuesday. Any chance I can borrow your engine crane?
Breaking - Bianca GTi6 - Jonny b - 29-10-2012
I'll see if my mans finished with it bud but yeh shouldn't be a prob, maybe you could do me a deal with the windows and door cards seeing as Iam now getting a used mount back?
RE: Breaking - Bianca GTi6 - Dum-Dum - 29-10-2012
You can have them FOC mate, how's about that.
Breaking - Bianca GTi6 - Jonny b - 29-10-2012
Sounds good to me fella cheers
RE: Breaking - Bianca GTi6 - Kwik - 29-10-2012
dum you ok? gonna check your project thread now
Edit
found thread in the couch
RE: Breaking - Bianca GTi6 - Niall - 29-10-2012
Price for top end?
RE: Breaking - Bianca GTi6 - C2K - 29-10-2012
The helmet net in the back? How have you fixed it?
RE: Breaking - Bianca GTi6 - Midnightclub - 29-10-2012
What type of a de-cat is it mate? Dibs! (if that's allowed..)
RE: Breaking - Bianca GTi6 - Chris - 29-10-2012
I'll take the harnsess, cash at ace next month?
RE: Breaking - Bianca GTi6 - Dum-Dum - 29-10-2012
(29-10-2012, 12:20 PM)Niall Wrote: Price for top end?Engine is going as a whole mate. If you want to buy it and further break it thats your issue however ill do you a discount if you remove it from the car.
(29-10-2012, 12:23 PM)C2K Wrote: The helmet net in the back? How have you fixed it?Cable ties at the top and screws with huge washers at the bottom to stop stuff sliding out the boot. Its a double sided net so you can put things in it as well as behind it. £6 posted?
(29-10-2012, 12:58 PM)Midnightclub Wrote: What type of a de-cat is it mate? Dibs! (if that's allowed..)A welded one but its in really good condition. dibbs is fine, when you gonna pay.
(29-10-2012, 02:51 PM)Chris Wrote: I'll take the harnsess, cash at ace next month?Id rather them gone before then if im honest as thats still 3 weeks away
RE: Breaking - Bianca GTi6 - 7057sam - 29-10-2012
Doors cards please mate, pm me your PayPal
RE: Breaking - Bianca GTi6 - Dum-Dum - 29-10-2012
Sorry mate, jonnyb is having them for lending me his bottom engine mount for months while scott organised the baker group buy.
RE: Breaking - Bianca GTi6 - Midnightclub - 29-10-2012
(29-10-2012, 03:25 PM)Dum-Dum Wrote:(29-10-2012, 12:58 PM)Midnightclub Wrote: What type of a de-cat is it mate? Dibs! (if that's allowed..)A welded one but its in really good condition. dibbs is fine, when you gonna pay.
You still thinking of coming down on the dec 2nd bud?
RE: Breaking - Bianca GTi6 - Dum-Dum - 29-10-2012
(29-10-2012, 03:48 PM)Midnightclub Wrote:(29-10-2012, 03:25 PM)Dum-Dum Wrote:(29-10-2012, 12:58 PM)Midnightclub Wrote: What type of a de-cat is it mate? Dibs! (if that's allowed..)A welded one but its in really good condition. dibbs is fine, when you gonna pay.
You still thinking of coming down on the dec 2nd bud?
Theres a good potential for it but i really dont want to hold on to it for over a month, i need to get the garage cleared ASAP
RE: Breaking - Bianca GTi6 - Midnightclub - 29-10-2012
Fair enough mate, that's understandable.. well if you still have it and if you still come down then i'll take it, if anyone else wants it sooner than that then no worries! Unless someone you trust is coming up my way soon?
RE: Breaking - Bianca GTi6 - bigcheez2k3 - 29-10-2012
You're in Hayes, aren't you? Might be interested in the beam, do you know if it's been rebuilt at any point?
RE: Breaking - Bianca GTi6 - DavidG - 29-10-2012
What windows are the poly carbs? Have they been glued or rivited in? Thanks!
RE: Breaking - Bianca GTi6 - Matt - 29-10-2012
Riveted and glued
Breaking - Bianca GTi6 - kentiiboii - 29-10-2012
Dude... Are the stud and nut conversion Toyota style??? I sold mine few weeks ago with the intention of not buying a 306 and now I have a 306 again lol.
If they're Toyota style for 307 alloys then how much posted?
RE: Breaking - Bianca GTi6 - DavidG - 29-10-2012
(29-10-2012, 04:44 PM)Matt Wrote: Riveted and glued
Ha ha, i'll wish him luck getting them off then!
RE: Breaking - Bianca GTi6 - Dum-Dum - 29-10-2012
(29-10-2012, 04:27 PM)Midnightclub Wrote: Fair enough mate, that's understandable.. well if you still have it and if you still come down then i'll take it, if anyone else wants it sooner than that then no worries! Unless someone you trust is coming up my way soon?It surely cant cost that much to post, only weighs about 3kg IIRC, Ill just tape the label to the pipe itself.
(29-10-2012, 04:34 PM)bigcheez2k3 Wrote: You're in Hayes, aren't you? Might be interested in the beam, do you know if it's been rebuilt at any point?Yeah the hayes near heathrow, not hayes, kent. Dont believe its ever been rebuilt.
(29-10-2012, 05:06 PM)kentiiboii Wrote: Dude... Are the stud and nut conversion Toyota style??? I sold mine few weeks ago with the intention of not buying a 306 and now I have a 306 again lol.Nope theyer taper seats for the TD wheels
If they're Toyota style for 307 alloys then how much posted?
(29-10-2012, 05:08 PM)DavidG Wrote:(29-10-2012, 04:44 PM)Matt Wrote: Riveted and glued
Ha ha, i'll wish him luck getting them off then!
Yeah, im hoping I can manage it with a bit of heat, if it was perspex i wouldnt bother but the polycarb should cope with being prised off
RE: Breaking - Bianca GTi6 - cully - 29-10-2012
did you have front fogs intact?
Re: RE: Breaking - Bianca GTi6 - Tyronnster - 29-10-2012
(28-10-2012, 11:40 PM)Dum-Dum Wrote:(28-10-2012, 11:38 PM)R45_ODV Wrote: 306 steering boss, BNIB £15 what make? and how much posted?Cheap ebay mate, £20 posted mate if your paying paypal.
This gone