306oc - Peugeot 306 Owners Club & Forum
Swap a GTI-6 Rear beam for lowered drum beam - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25)
+--- Thread: Swap a GTI-6 Rear beam for lowered drum beam (/showthread.php?tid=731)



Swap a GTI-6 Rear beam for lowered drum beam - Dan - 03-01-2012

as title says i want to swap my gti-6 rear beam for a lowered drum beam


Re: Swap a GTI-6 Rear beam for lowered drum beam - Daniel306 - 03-01-2012

how much lowerd do you want it?


Re: Swap a GTI-6 Rear beam for lowered drum beam - Foxy-jim - 03-01-2012

Why are to doing that?


Re: Swap a GTI-6 Rear beam for lowered drum beam - Dan - 03-01-2012

Daniel306 Wrote:how much lowerd do you want it?

60-70mm prefferably


Re: Swap a GTI-6 Rear beam for lowered drum beam - Dan - 03-01-2012

Foxy-jim Wrote:Why are to doing that?

long story short the car actually belongs to my girlfriend and we were ment to be sharing it as i have just passed my test and thought i couldnt afford my insurance on my own car but it turns out i can, the reasons i want to get rid of the gti-6 beam is because i will fit it then have to pay someone to lower it again so i thought someone may want to swap it for a lowered drum beam as it would wor out easyer and cheaper


Re: Swap a GTI-6 Rear beam for lowered drum beam - Daniel306 - 03-01-2012

if its not fitted to the car its easier to lower it, its worth giving it a try


Re: Swap a GTI-6 Rear beam for lowered drum beam - Dan - 03-01-2012

but how would i get the measurements right


Swap a GTI-6 Rear beam for lowered drum beam - Matt - 04-01-2012

Tape measure?


Re: Swap a GTI-6 Rear beam for lowered drum beam - ginge191 - 04-01-2012

you can have my rear beam after i get my new beam fitted. if you find a seller for that disc beam, i'll take the cash...


Re: Swap a GTI-6 Rear beam for lowered drum beam - Daniel306 - 04-01-2012

Take a measurement between the shock bolt holes on your old beam then make the 6 beam the same distance