![]() |
Rev counter problem - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16) +--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11) +--- Thread: Rev counter problem (/showthread.php?tid=7166) |
Rev counter problem - Bananalad - 19-10-2012 Changed my xud for another but the sensor for the rev counter is different? The hole in the back of the block is there but my sensor wont go in.. Any ideas? Thanks ![]() RE: Rev counter problem - Bananalad - 19-10-2012 Bumpity bump i miss my rev counter ![]() RE: Rev counter problem - Dave - 19-10-2012 open it up? they are all the same.. must not have undone the 10mm bolt enough RE: Rev counter problem - Bananalad - 19-10-2012 What do you mean dave? I took the sensor out of my own block and when i went to put it into my new block there is nothing in the same hole? RE: Rev counter problem - Dave - 19-10-2012 Make the hole bigger by unscrewing the bolt that clamps around it RE: Rev counter problem - strictly_perv - 20-10-2012 I am having this issue after I changed to a 306 box can't workout where is it. RE: Rev counter problem - CJ_Derv - 20-10-2012 As Dave says really, get some pictures to show us ![]() RE: Rev counter problem - Bananalad - 20-10-2012 I wont be under the car till later ![]() RE: Rev counter problem - Bananalad - 20-10-2012 My old sensor was around the back of the block and my new one is a white plug at the front of the engine? |