![]() |
206 HDi 2.0 90 Remap - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16) +--- Forum: DW10 HDi section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=10) +--- Thread: 206 HDi 2.0 90 Remap (/showthread.php?tid=7071) |
206 HDi 2.0 90 Remap - C.A.R. - 17-10-2012 Right, My boss's mate has a 206 HDi 90 and he wants to know if the map and software I have (which came with my car) will work on his? I have the software and the cable thingy, but no experience. What do I need to know about his engine, and pressumably the engine management system in order to get the remap to work? Or is a remap for a 306 not advisable on what is essentially the same engine in a different car? RE: 206 HDi 2.0 90 Remap - Oil-burner - 17-10-2012 Afaik the map will work if the Ecu code is the same! The cable and software will work fine! RE: 206 HDi 2.0 90 Remap - Poodle - 17-10-2012 As above, check the ecu codes match first, else you could end up with a bricked ecu. Failing that you can get stage 1s off mr_whippy or pro_steve for about 50 quid. RE: 206 HDi 2.0 90 Remap - C.A.R. - 17-10-2012 Cool, I will advise as such then ![]() Um.. So how do I find out my ECU code? ![]() 206 HDi 2.0 90 Remap - kentiiboii - 17-10-2012 Ecu code is on ecu. Edc16c2 6 574 474 80 Something on the lines of that. RE: 206 HDi 2.0 90 Remap - cully - 17-10-2012 (17-10-2012, 12:03 PM)kentiiboii Wrote: Ecu code is on ecu. not nessecery as the wifes 206hdi is a EDC15C2 code ending in 500 but as said look for the sticker on the ecu case which is located drivers inerwing in front of the strut top RE: 206 HDi 2.0 90 Remap - Mr Whippy - 18-10-2012 You probably want to get a map specifically for your software. I'm guessing yours is a 306 HDi, but theirs is a 206 HDi. The 500 does come on both cars but I'd really want to check the binaries first to make sure they match generally before swapping stuff over. Last thing you want to do is brick a mates ECU doing a freebie! Dave RE: 206 HDi 2.0 90 Remap - C.A.R. - 19-10-2012 This is the thing, I'm not wanting to do it at all. He was quoted £200 elsewhere, what would you charge to do similar? RE: 206 HDi 2.0 90 Remap - Mr Whippy - 24-10-2012 Hi there, Sorry for the delay in responding. Well if you are happy to read his data off, and your data off, I can check if they will be compatible for you free of charge. Then it'd be up to you to tell your friend if they want to risk doing the read/write themselves, if it's compatible of course. Alternatively I'll remap a car for £150 if they visit me, or £75 for the file remapping service for a stage 1 level tune, which might work out ok. What tool is it you have for remapping? KWP or Galletto? Either should be fine. Cheers Dave |