306oc - Peugeot 306 Owners Club & Forum
Aux Belt - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: Aux Belt (/showthread.php?tid=6968)



Aux Belt - Tyronnster - 13-10-2012

Lost my aux belt on route to Scotland last night.

Just calling to get replacement an I'm told there is 2 available.

Anyone able to shed light

N reg phase 1 306

PAS
No air con.

HELP

I'm told choice of 2 one is 10mm longer


Aux Belt - kentiiboii - 13-10-2012

One is if you have aircon. Other is if you havnt.


RE: Aux Belt - Toms306 - 13-10-2012

As Kent says....the ac one will obviously be longer....


Aux Belt - kentiiboii - 13-10-2012

Whoop I got something right!


Re: Aux Belt - Tyronnster - 13-10-2012

Got the two belts supplied an for the life of me can't get either in. Aaarrrggg


RE: Aux Belt - Toms306 - 13-10-2012

You are routing them right yeah?

Got my belt on slightly wrong first time (was in a hurry!) and had a load of slack leftover lol, checked the haynes and re-routed it properly, was damn tight though!


Re: Aux Belt - Tyronnster - 13-10-2012

There don't seem enough slack if honest.

Just had a thought was converted from Lucas to Bosch could that be an issue


Re: Aux Belt - Tyronnster - 13-10-2012

Can someone who help incase I'm routing wrong


Aux Belt - kentiiboii - 13-10-2012

Put a spanner on the tensioner and get someone to push the spanner while you pop the aux belt on. The tensioner lets of lots of slack this way.


Re: Aux Belt - Tyronnster - 13-10-2012

Its a manual one an got the thing pushed as much as piss.


RE: Aux Belt - Jake949 - 02-11-2012

swapping the fuel pump wont matter, thats on the cambelt not aux.


RE: Aux Belt - Curt - 02-11-2012

It'll should be pretty obvious if you're routing it wrong... So you've got two options really; wrong belt, or the tensioner isn't slackened off properly. You loosened everything yeah? There's the 2 13mm bolts, then the hex bolt at the top to wind in and out.