![]() |
Coolant Hose From Cylinder Head - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16) +--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11) +--- Thread: Coolant Hose From Cylinder Head (/showthread.php?tid=6957) |
Coolant Hose From Cylinder Head - bcac306 - 12-10-2012 Hi all, quick question. Can someone tell me where the coolant pipe coming from the bottom left corner of the cylinder head is supposed to be attached? the pipe is coming out from like behind a metal plate cover which covers a hole in the head. Thanks all. (12-10-2012, 07:42 PM)bcac306 Wrote: Hi all, It seems that it is only fitted to turbo diesels and not to N/A ones. RE: Coolant Hose From Cylinder Head - Ruan - 14-10-2012 If it's the plate behind the injection pump that's got a 4mm pipe coming off it, that should connect to the bleed line that goes from there, tees into another pipe coming from behind the fuel filter/thermostat housing and then down to the header tank - it's all one pipe that connects back with a tee piece in. Hope this helps. RE: Coolant Hose From Cylinder Head - bcac306 - 18-10-2012 (14-10-2012, 09:30 PM)Ruan Wrote: If it's the plate behind the injection pump that's got a 4mm pipe coming off it, that should connect to the bleed line that goes from there, tees into another pipe coming from behind the fuel filter/thermostat housing and then down to the header tank - it's all one pipe that connects back with a tee piece in. Great thanks for the reply ![]() |