+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Interior, Exterior, ICE (https://www.306oc.co.uk/forum/forumdisplay.php?fid=12)
+--- Thread: Changing heater matrix (/showthread.php?tid=6846)
Changing heater matrix - Ben - 09-10-2012
Just printed off a guide from the gti forum to help me change my matrix.
This one - http://www.306gti6.com/forum/showthread.php?id=78999&page=1
It says that it is a guide for a 'BEHR' system. I don't know whether or not I have a BEHR system, but I'm assuming even if I don't there shouldn't be any major differences in the job?
RE: Changing heater matrix - Ben - 13-10-2012
Just used the guide to take the dash out, went pretty well. I thought that would have been the hard part!
Struggling with the matrix though, the guide makes it sound pretty simple, 'just 2 10mm bolts and a torx bolt and the box around the matrix will come off', but mines still pretty sturdy.
And the other side of the bulkhead I can't get the pipes off the matrix. I've seen the little springy clip you have to compress but even with it compressed I can't budge the pipes.
Anyone a matrix pro?!