![]() |
205 low boost 3dr gear pull - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: General (https://www.306oc.co.uk/forum/forumdisplay.php?fid=6) +--- Forum: The Couch (https://www.306oc.co.uk/forum/forumdisplay.php?fid=7) +--- Thread: 205 low boost 3dr gear pull (/showthread.php?tid=5897) |
205 low boost 3dr gear pull - strictly_perv - 30-08-2012 Here's a quick vid of the 205 it's only boosting about 25psi so it's nothing special it's just while the clutch is bedding in but a few people have been demanding some speedo vids. http://www.youtube.com/watch?v=aFAvuI_OZSQ&feature=youtu.be RE: 205 low boost 3dr gear pull - ginge191 - 30-08-2012 ......What's that slip @45mph ![]() 205 low boost 3dr gear pull - MissTap_GTI6 - 30-08-2012 Niiice, so your rev counter isn't working now? RE: 205 low boost 3dr gear pull - strictly_perv - 30-08-2012 That vid was during the bedding in process, it got better and better each time and probably still isn't fully bedded in yet. RE: 205 low boost 3dr gear pull - Tom - 30-08-2012 Looks like it goes well tbh ![]() RE: 205 low boost 3dr gear pull - Daniel306 - 30-08-2012 My rev counter sits it the same place, any idea why it dose not work? RE: 205 low boost 3dr gear pull - strictly_perv - 30-08-2012 Only because at the time of putting in the '9 box I hadn't realised the sensor didn't fit. Just need t ore-wire this new sensor in. RE: 205 low boost 3dr gear pull - procta - 30-08-2012 (30-08-2012, 06:05 PM)strictly_derv Wrote: Only because at the time of putting in the '9 box I hadn't realised the sensor didn't fit. Just need t ore-wire this new sensor in. get your finger out max, anyway is this back to how it was now after the smash? RE: 205 low boost 3dr gear pull - strictly_perv - 30-08-2012 Nearly, I just need a new wing but can't afford that ATM ![]() RE: 205 low boost 3dr gear pull - procta - 30-08-2012 (30-08-2012, 07:05 PM)strictly_derv Wrote: Nearly, I just need a new wing but can't afford that ATM can you get hold of one max? i could have look and see if the 205s are still at my scrappy. i could price it and see what the crack is with postage? RE: 205 low boost 3dr gear pull - strictly_perv - 30-08-2012 Appreciate the help but they are virtually impossible to remove with-out damaging as they are bonded on on non-GTI's....hence why this once's a shitter. But if then can remove them i'd be very interested for a white one. Cheers RE: 205 low boost 3dr gear pull - procta - 30-08-2012 (30-08-2012, 07:09 PM)strictly_derv Wrote: Appreciate the help but they are virtually impossible to remove with-out damaging as they are bonded on on non-GTI's....hence why this once's a shitter. But if then can remove them i'd be very interested for a white one. Cheers got no chance of a white on max sorry, id have to remove it for you, are they fully bonded on? be away of getting it off with out damaging the wing. RE: 205 low boost 3dr gear pull - Daniel306 - 30-08-2012 Iv got two gti's and a Dturbo and they are all bonded on RE: 205 low boost 3dr gear pull - strictly_perv - 04-09-2012 Thanks anyway Procta. What do people reckon the power output is in the vid? I gotta keep it under 150bhp ![]() RE: 205 low boost 3dr gear pull - 4WayDiablo - 04-09-2012 That was pretty much a 30-70 wasnt it? What time did you do it in? RE: 205 low boost 3dr gear pull - procta - 04-09-2012 max you want me to have a look at a wing? RE: 205 low boost 3dr gear pull - strictly_perv - 04-09-2012 Looks about 7 seconds with lag due to being in 3rd and a little clutch slip, so not very impressive. I will do an actual 30-70 vid soon. Yes Procta if you could have a look it would be much appreciated ![]() |