+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Misc & Wanted (https://www.306oc.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: Wanted: Gti6/Rallye inlet manifold... (/showthread.php?tid=5201)
Gti6/Rallye inlet manifold... - Alee83 - 28-07-2012
As said, bare inlet manifold for gti6/rallye please guys? Many thanks!
RE: Gti6/Rallye inlet manifold... - Matt - 28-07-2012
I'll have one soon enough, just gunna powdercoat mine at the end of the month then I'll have a spare
Re: Gti6/Rallye inlet manifold... - Alee83 - 28-07-2012
If you get it spare before I get one, how much would you want posted?
RE: Gti6/Rallye inlet manifold... - Matt - 28-07-2012
£20 + postage?
Re: Gti6/Rallye inlet manifold... - Alee83 - 29-07-2012
Ok Matt, is it End of August...?
If I don't get one by then I'll ave it..!
RE: Gti6/Rallye inlet manifold... - Matt - 29-07-2012
Hopefully lol
okay mate give me a pm if you get one
RE: Gti6/Rallye inlet manifold... - Niall - 29-07-2012
I've got one. Only problem is one of the mounts for the fuel rail has been redrilled badly but it still fixes on nice and tight
Re: Gti6/Rallye inlet manifold... - Alee83 - 29-07-2012
Will do Matt...
How much would you want for it Niall? Posted mind!!
RE: Gti6/Rallye inlet manifold... - Matt - 29-07-2012
Nialls is shit, I've seen it's f*cked
RE: Gti6/Rallye inlet manifold... - Niall - 29-07-2012
Errrrm £25 posted. It was powder coated silver about 6 months ago. Just needs a clean up with a damp cloth. Or I can take it to ace day if your coming.
Re: Gti6/Rallye inlet manifold... - Alee83 - 30-07-2012
Live too far away from ace!! I'm a Northerner!
I have now got one sent from Raz this morning but cheers Niall!
RE: Gti6/Rallye inlet manifold... - Ed Doe - 30-07-2012
Nice one mate; give me a buzz when you're sticking it all back together
That or ring me when you've been for the first spin...
Re: Gti6/Rallye inlet manifold... - Alee83 - 30-07-2012
I will do Ed....
What torque setting do I do the manifold? Oh, and I'm ditching the PTFE...
RE: Gti6/Rallye inlet manifold... - Ed Doe - 31-07-2012
(30-07-2012, 03:13 PM)Alee83 Wrote: I will do Ed....
What torque setting do I do the manifold? Oh, and I'm ditching the PTFE...
Well I didn't bother with a torque setting, I just did it up fairly tight!
Why you ditching it? You've not even given it a chance!!
RE: Gti6/Rallye inlet manifold... - Matt - 31-07-2012
Ptfe is on mine and running sweet
Re: Gti6/Rallye inlet manifold... - Alee83 - 31-07-2012
It's the ptfe that is causing it to blow!
RE: Gti6/Rallye inlet manifold... - Ed Doe - 31-07-2012
(31-07-2012, 11:46 AM)Alee83 Wrote: It's the ptfe that is causing it to blow!
You sure? If there aren't any holes in it where there shouldntbe, and if it's not deformed as I said on the phone, it should be fine! Offer it up against the oem gasket and see....
RE: Gti6/Rallye inlet manifold... - Niall - 31-07-2012
(31-07-2012, 11:46 AM)Alee83 Wrote: It's the ptfe that is causing it to blow!
Did you check the face of the manifold to make sure there was no old gasket on there? Take a bit of 800-1000 grit paper to it to clean it up.
Re: Gti6/Rallye inlet manifold... - Alee83 - 31-07-2012
I did sand down both the head and the inlet before fitting... I also tightened the inlet up tight, too tight it might seem. There are now indents on the PTFE. Might try sandwitching the PTFE with 2 standard gaskets and see if that works... Also, anyone actually know the torque setting for the inlet??
RE: Gti6/Rallye inlet manifold... - Niall - 31-07-2012
Iirc it's 15nm but not 100% on that. Some lanky pasty ginger had my laptop with auto data on.
Re: Gti6/Rallye inlet manifold... - Alee83 - 31-07-2012
Poor Ruan.... 15 isn't that tight, suppose I could do 15nm and if it blows, do 20nm and so on....
Re: Gti6/Rallye inlet manifold... - Alee83 - 01-08-2012
PTFE on with new manifold, BIG thanks to Raz...
Car running sweet! Even used a torque wrench this time at 15nm.
Thanks to Ed and Matt for all their help too....